FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Stress Required for Gasket Seating Formula

GoStress Required for Gasket Seating given Bolt Load Formula

Fx Copy

LaTeX Copy

The Stress Required for Gasket Seating is defined as the value of the stress in the gasket required for the seating or the installment of the gasket. Check FAQs

σ gs = \frac{2 \cdot π \cdot y sl \cdot G \cdot N}{A b}

σ_gs - Stress Required for Gasket Seating?y_sl - Gasket Unit Seating Load?G - Gasket Diameter?N - Gasket Width?A_b - Actual Bolt Area?π - Archimedes' constant?

Stress Required for Gasket Seating Example

With values

With units

Only example

Here is how the Stress Required for Gasket Seating equation looks like with Values.

Here is how the Stress Required for Gasket Seating equation looks like with Units.

Here is how the Stress Required for Gasket Seating equation looks like.

25.1886 = \frac{2 \cdot 3.1416 \cdot 3.85 \cdot 32 \cdot 4.1}{126}

25.1886N/mm² = \frac{2 \cdot 3.1416 \cdot 3.85N/mm² \cdot 32mm \cdot 4.1mm}{126mm²}

25.1886 = \frac{2 \cdot 3.1416 \cdot 3.85 \cdot 32 \cdot 4.1}{126}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Design of Machine Elements » fx Stress Required for Gasket Seating

Stress Required for Gasket Seating Solution

Follow our step by step solution on how to calculate Stress Required for Gasket Seating?

FIRST Step Consider the formula

σ gs = \frac{2 \cdot π \cdot y sl \cdot G \cdot N}{A b}

Next Step Substitute values of Variables

∴

σ gs = \frac{2 \cdot π \cdot 3.85N/mm² \cdot 32mm \cdot 4.1mm}{126mm²}

Next Step Substitute values of Constants

∴

σ gs = \frac{2 \cdot 3.1416 \cdot 3.85N/mm² \cdot 32mm \cdot 4.1mm}{126mm²}

Next Step Convert Units

∴

σ gs = \frac{2 \cdot 3.1416 \cdot 3.9E+6Pa \cdot 0.032m \cdot 0.0041m}{0.0001m²}

Next Step Prepare to Evaluate

∴

σ gs = \frac{2 \cdot 3.1416 \cdot 3.9E+6 \cdot 0.032 \cdot 0.0041}{0.0001}

Next Step Evaluate

∴

σ gs = 25188591.7647822Pa

Next Step Convert to Output's Unit

∴

σ gs = 25.1885917647822N/mm²

LAST Step Rounding Answer

∴

σ gs = 25.1886N/mm²

Stress Required for Gasket Seating Formula Elements

Variables

Constants

Stress Required for Gasket Seating

The Stress Required for Gasket Seating is defined as the value of the stress in the gasket required for the seating or the installment of the gasket.

Symbol: σ_gs

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Stress Required for Gasket Seating

Gasket Unit Seating Load

Gasket Unit Seating Load is the seating load on per unit area o the sealing gasket.

Symbol: y_sl

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Gasket Unit Seating Load

Gasket Diameter

Gasket Diameter is a straight line passing from side to side through the centre of a gasket.

Symbol: G

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Gasket Diameter

Gasket Width

Gasket Width is defined as the thickness of the gasket measured along the radial direction of the gasket.

Symbol: N

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Gasket Width

Actual Bolt Area

Actual Bolt Area is defined as cross-sectional area of the bolts using root diameter of thread or least diameter of an unthreaded portion (if less), to prevent damage to the gasket during bolting-up.

Symbol: A_b

Measurement: AreaUnit: mm²

Note: Value should be greater than 0.

Formulas to find Actual Bolt Area

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

Other Formulas to find Stress Required for Gasket Seating

Go Stress Required for Gasket Seating given Bolt Load

σ gs = \frac{W m1}{\frac{A m + A b}{2}}

Other formulas in Bolt Loads in Gasket Joints category

Go Bolt load under operating condition

W m1 = H + H p

Go Hydrostatic end force

H = W m1 - H p

Go Bolt Load under operating condition given Hydrostatic End Force

W m1 = ((\frac{π}{4}) \cdot {(G)}^{2} \cdot P) + (2 \cdot b g \cdot π \cdot G \cdot P \cdot m)

Go Hydrostatic End Force given Bolt Load under Operating condition

H = W m1 - (2 \cdot b g \cdot π \cdot G \cdot m \cdot P)

How to Evaluate Stress Required for Gasket Seating?

Stress Required for Gasket Seating evaluator uses Stress Required for Gasket Seating = (2*pi*Gasket Unit Seating Load*Gasket Diameter*Gasket Width)/(Actual Bolt Area) to evaluate the Stress Required for Gasket Seating, Stress Required for Gasket Seating is defined as the value of the stress in the gasket required for the seating or the installment of the gasket. Stress Required for Gasket Seating is denoted by σ_gs symbol.

How to evaluate Stress Required for Gasket Seating using this online evaluator? To use this online evaluator for Stress Required for Gasket Seating, enter Gasket Unit Seating Load (y_sl), Gasket Diameter (G), Gasket Width (N) & Actual Bolt Area (A_b) and hit the calculate button.

FAQs on Stress Required for Gasket Seating

What is the formula to find Stress Required for Gasket Seating?

The formula of Stress Required for Gasket Seating is expressed as Stress Required for Gasket Seating = (2*pi*Gasket Unit Seating Load*Gasket Diameter*Gasket Width)/(Actual Bolt Area). Here is an example- 2.5E-5 = (2*pi*3850000*0.032*0.0041)/(0.000126).

How to calculate Stress Required for Gasket Seating?

With Gasket Unit Seating Load (y_sl), Gasket Diameter (G), Gasket Width (N) & Actual Bolt Area (A_b) we can find Stress Required for Gasket Seating using the formula - Stress Required for Gasket Seating = (2*pi*Gasket Unit Seating Load*Gasket Diameter*Gasket Width)/(Actual Bolt Area). This formula also uses Archimedes' constant .

What are the other ways to Calculate Stress Required for Gasket Seating?

Here are the different ways to Calculate Stress Required for Gasket Seating-

Stress Required for Gasket Seating=Bolt Load Under Operating Condition for Gasket/((Greater Cross-section Area of Bolts+Actual Bolt Area)/2)

Can the Stress Required for Gasket Seating be negative?

No, the Stress Required for Gasket Seating, measured in Stress cannot be negative.

Which unit is used to measure Stress Required for Gasket Seating?

Stress Required for Gasket Seating is usually measured using the Newton per Square Millimeter[N/mm²] for Stress. Pascal[N/mm²], Newton per Square Meter[N/mm²], Kilonewton per Square Meter[N/mm²] are the few other units in which Stress Required for Gasket Seating can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Stress Required for Gasket Seating Formula

​GoStress Required for Gasket Seating given Bolt Load Formula

Stress Required for Gasket Seating Example

Stress Required for Gasket Seating Solution

Stress Required for Gasket Seating Formula Elements

Other Formulas to find Stress Required for Gasket Seating

Other formulas in Bolt Loads in Gasket Joints category

How to Evaluate Stress Required for Gasket Seating?

FAQs on Stress Required for Gasket Seating

Variable Name

GoStress Required for Gasket Seating given Bolt Load Formula