FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Strength of solid plate per pitch length Formula

GoStrength of solid plate given efficiency of riveted joint Formula

GoStrength of solid plate given efficiency of riveted joint and least strength value Formula

Fx Copy

LaTeX Copy

Strength of solid plate is the quality or state of being physically strong. Check FAQs

S p = (σ t \cdot p \cdot t plate)

S_p - Strength of Solid Plate?σ_t - Tensile Stress?p - Pitch of Rivet?t_plate - Thickness of Plate?

Strength of solid plate per pitch length Example

With values

With units

Only example

Here is how the Strength of solid plate per pitch length equation looks like with Values.

Here is how the Strength of solid plate per pitch length equation looks like with Units.

Here is how the Strength of solid plate per pitch length equation looks like.

0.0415 = (0.173 \cdot 20 \cdot 12)

0.0415kN = (0.173MPa \cdot 20mm \cdot 12mm)

0.0415 = (0.173 \cdot 20 \cdot 12)

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Strength of solid plate per pitch length

Strength of solid plate per pitch length Solution

Follow our step by step solution on how to calculate Strength of solid plate per pitch length?

FIRST Step Consider the formula

S p = (σ t \cdot p \cdot t plate)

Next Step Substitute values of Variables

∴

S p = (0.173MPa \cdot 20mm \cdot 12mm)

Next Step Convert Units

∴

S p = (173000Pa \cdot 0.02m \cdot 0.012m)

Next Step Prepare to Evaluate

∴

S p = (173000 \cdot 0.02 \cdot 0.012)

Next Step Evaluate

∴

S p = 41.52N

Next Step Convert to Output's Unit

∴

S p = 0.04152kN

LAST Step Rounding Answer

∴

S p = 0.0415kN

Strength of solid plate per pitch length Formula Elements

Variables

Strength of Solid Plate

Strength of solid plate is the quality or state of being physically strong.

Symbol: S_p

Measurement: ForceUnit: kN

Note: Value can be positive or negative.

Formulas to find Strength of Solid Plate

Tensile Stress

Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Pitch of Rivet

Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.

Symbol: p

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Pitch of Rivet

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Other Formulas to find Strength of Solid Plate

Go Strength of solid plate given efficiency of riveted joint

S p = \frac{S r}{η}

Go Strength of solid plate given efficiency of riveted joint and least strength value

S p = \frac{P l}{S r}

Other formulas in Stress in Rivet category

Go Tearing strength of rivet

T strength = σ t \cdot (p - D rivet) \cdot t plate

Go Pitch of rivet given tearing strength of rivet

p = D rivet + (\frac{T strength}{σ t \cdot t plate})

Go Shearing strength if rivet is in single shear

V n = (1 \cdot n \cdot (\frac{π}{4}) \cdot 𝜏 \cdot ({D rivet}^{2}))

Go Number of rivets given shearing strength if rivet is in single shear

n = \frac{V n}{1 \cdot (\frac{π}{4}) \cdot 𝜏 \cdot ({D rivet}^{2})}

How to Evaluate Strength of solid plate per pitch length?

Strength of solid plate per pitch length evaluator uses Strength of Solid Plate = (Tensile Stress*Pitch of Rivet*Thickness of Plate) to evaluate the Strength of Solid Plate, The Strength of solid plate per pitch length formula is defined as the capacity of the rivet to withstand great force or pressure. Strength of Solid Plate is denoted by S_p symbol.

How to evaluate Strength of solid plate per pitch length using this online evaluator? To use this online evaluator for Strength of solid plate per pitch length, enter Tensile Stress (σ_t), Pitch of Rivet (p) & Thickness of Plate (t_plate) and hit the calculate button.

FAQs on Strength of solid plate per pitch length

What is the formula to find Strength of solid plate per pitch length?

The formula of Strength of solid plate per pitch length is expressed as Strength of Solid Plate = (Tensile Stress*Pitch of Rivet*Thickness of Plate). Here is an example- 4.2E-5 = (173000*0.02*0.012).

How to calculate Strength of solid plate per pitch length?

With Tensile Stress (σ_t), Pitch of Rivet (p) & Thickness of Plate (t_plate) we can find Strength of solid plate per pitch length using the formula - Strength of Solid Plate = (Tensile Stress*Pitch of Rivet*Thickness of Plate).

What are the other ways to Calculate Strength of Solid Plate?

Here are the different ways to Calculate Strength of Solid Plate-

Strength of Solid Plate=Strength of Riveted Joint/Efficiency of Riveted Joint
Strength of Solid Plate=Least Value of Strength/Strength of Riveted Joint

Can the Strength of solid plate per pitch length be negative?

Yes, the Strength of solid plate per pitch length, measured in Force can be negative.

Which unit is used to measure Strength of solid plate per pitch length?

Strength of solid plate per pitch length is usually measured using the Kilonewton[kN] for Force. Newton[kN], Exanewton[kN], Meganewton[kN] are the few other units in which Strength of solid plate per pitch length can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!