FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Stock Thickness when Shear used on Punch Formula

Fx Copy

LaTeX Copy

Thickness of Stock generally refers to the initial thickness of raw material or stock material before any machining or processing takes place. Check FAQs

t stk = \sqrt{\frac{F s \cdot t sh}{L ct \cdot p}}

t_stk - Thickness of Stock?F_s - Maximum Shear Force?t_sh - Shear on Punch?L_ct - Cutting Perimeter?p - Punch Penetration?

Stock Thickness when Shear used on Punch Example

With values

With units

Only example

Here is how the Stock Thickness when Shear used on Punch equation looks like with Values.

Here is how the Stock Thickness when Shear used on Punch equation looks like with Units.

Here is how the Stock Thickness when Shear used on Punch equation looks like.

8.9964 = \sqrt{\frac{0.0156 \cdot 1.6}{615.66 \cdot 0.5}}

8.9964mm = \sqrt{\frac{0.0156N \cdot 1.6mm}{615.66m \cdot 0.5mm}}

8.9964 = \sqrt{\frac{0.0156 \cdot 1.6}{615.66 \cdot 0.5}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Sheet Metal Operations » fx Stock Thickness when Shear used on Punch

Stock Thickness when Shear used on Punch Solution

Follow our step by step solution on how to calculate Stock Thickness when Shear used on Punch?

FIRST Step Consider the formula

t stk = \sqrt{\frac{F s \cdot t sh}{L ct \cdot p}}

Next Step Substitute values of Variables

∴

t stk = \sqrt{\frac{0.0156N \cdot 1.6mm}{615.66m \cdot 0.5mm}}

Next Step Convert Units

∴

t stk = \sqrt{\frac{0.0156N \cdot 0.0016m}{615.66m \cdot 0.0005m}}

Next Step Prepare to Evaluate

∴

t stk = \sqrt{\frac{0.0156 \cdot 0.0016}{615.66 \cdot 0.0005}}

Next Step Evaluate

∴

t stk = 0.0089963659995882m

Next Step Convert to Output's Unit

∴

t stk = 8.9963659995882mm

LAST Step Rounding Answer

∴

t stk = 8.9964mm

Stock Thickness when Shear used on Punch Formula Elements

Variables

Functions

Thickness of Stock

Thickness of Stock generally refers to the initial thickness of raw material or stock material before any machining or processing takes place.

Symbol: t_stk

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Stock

Maximum Shear Force

Maximum Shear Force is the highest magnitude of force acting perpendicular to the cross-section of a material, causing shear stress and potentially leading to deformation or failure.

Symbol: F_s

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Maximum Shear Force

Shear on Punch

Shear on Punch is the force or stress acting parallel to the cross-sectional area of the punch, typically encountered during a punching operation.

Symbol: t_sh

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Shear on Punch

Cutting Perimeter

Cutting Perimeter is the process of cutting the outer edges of a sheet of metal to shape it according to a specific design or pattern.

Symbol: L_ct

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Cutting Perimeter

Punch Penetration

Punch Penetration is the depth to which a punch penetrates into a material during a punching or piercing operation.

Symbol: p

Measurement: LengthUnit: mm

Note: Value should be between 0 to 1.

Formulas to find Punch Penetration

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Punch Operation category

Go Shear on Punch or Die

t sh = L ct \cdot t stk \cdot \frac{t stk \cdot p}{F s}

Go Punching Force for Holes Smaller than Sheet Thickness

P = \frac{d rm \cdot t b \cdot ε}{{(\frac{d rm}{t b})}^{\frac{1}{3}}}

Go Punch Load

L p = L ct \cdot t bar \cdot S c

Go Blank Size when there is Corner Radius on Punch

d bl = \sqrt{{d s}^{2} + 4 \cdot d s \cdot h shl - 0.5 \cdot r cn}

How to Evaluate Stock Thickness when Shear used on Punch?

Stock Thickness when Shear used on Punch evaluator uses Thickness of Stock = sqrt((Maximum Shear Force*Shear on Punch)/(Cutting Perimeter*Punch Penetration)) to evaluate the Thickness of Stock, Stock Thickness when Shear used on Punch is used can be defined as that thickness which can be used while providing certain force and shear on punch. Thickness of Stock is denoted by t_stk symbol.

How to evaluate Stock Thickness when Shear used on Punch using this online evaluator? To use this online evaluator for Stock Thickness when Shear used on Punch, enter Maximum Shear Force (F_s), Shear on Punch (t_sh), Cutting Perimeter (L_ct) & Punch Penetration (p) and hit the calculate button.

FAQs on Stock Thickness when Shear used on Punch

What is the formula to find Stock Thickness when Shear used on Punch?

The formula of Stock Thickness when Shear used on Punch is expressed as Thickness of Stock = sqrt((Maximum Shear Force*Shear on Punch)/(Cutting Perimeter*Punch Penetration)). Here is an example- 89963.66 = sqrt((0.015571*0.001599984)/(615.66*0.000499985)).

How to calculate Stock Thickness when Shear used on Punch?

With Maximum Shear Force (F_s), Shear on Punch (t_sh), Cutting Perimeter (L_ct) & Punch Penetration (p) we can find Stock Thickness when Shear used on Punch using the formula - Thickness of Stock = sqrt((Maximum Shear Force*Shear on Punch)/(Cutting Perimeter*Punch Penetration)). This formula also uses Square Root Function function(s).

Can the Stock Thickness when Shear used on Punch be negative?

No, the Stock Thickness when Shear used on Punch, measured in Length cannot be negative.

Which unit is used to measure Stock Thickness when Shear used on Punch?

Stock Thickness when Shear used on Punch is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Stock Thickness when Shear used on Punch can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Stock Thickness when Shear used on Punch Formula

Stock Thickness when Shear used on Punch Example

Stock Thickness when Shear used on Punch Solution

Stock Thickness when Shear used on Punch Formula Elements

Other formulas in Punch Operation category

How to Evaluate Stock Thickness when Shear used on Punch?

FAQs on Stock Thickness when Shear used on Punch

Variable Name