FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Slope Correction for Slopes of 10 Percent or Less Formula

GoSlope Correction for Slopes Greater than 10 Percent Formula

Fx Copy

LaTeX Copy

The Slope Correction is the adjustments made to measured or calculated values to account for the inclination of the land or the slope of the ground surface. Check FAQs

Cs = \frac{{ΔH}^{2}}{2 \cdot U l}

Cs - Slope Correction?ΔH - Difference in Elevation?U_l - Unsupported Length?

Slope Correction for Slopes of 10 Percent or Less Example

With values

With units

Only example

Here is how the Slope Correction for Slopes of 10 Percent or Less equation looks like with Values.

Here is how the Slope Correction for Slopes of 10 Percent or Less equation looks like with Units.

Here is how the Slope Correction for Slopes of 10 Percent or Less equation looks like.

12.5 = \frac{15^{2}}{2 \cdot 9}

12.5m = \frac{{15m}^{2}}{2 \cdot 9m}

12.5 = \frac{15^{2}}{2 \cdot 9}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Surveying Formulas » fx Slope Correction for Slopes of 10 Percent or Less

Slope Correction for Slopes of 10 Percent or Less Solution

Follow our step by step solution on how to calculate Slope Correction for Slopes of 10 Percent or Less?

FIRST Step Consider the formula

Cs = \frac{{ΔH}^{2}}{2 \cdot U l}

Next Step Substitute values of Variables

∴

Cs = \frac{{15m}^{2}}{2 \cdot 9m}

Next Step Prepare to Evaluate

∴

Cs = \frac{15^{2}}{2 \cdot 9}

LAST Step Evaluate

∴

Cs = 12.5m

Slope Correction for Slopes of 10 Percent or Less Formula Elements

Variables

Slope Correction

The Slope Correction is the adjustments made to measured or calculated values to account for the inclination of the land or the slope of the ground surface.

Symbol: Cs

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Slope Correction

Difference in Elevation

Difference in elevation is the vertical distance between two points, indicating how high or low one point is relative to the other.

Symbol: ΔH

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Difference in Elevation

Unsupported Length

Unsupported Length is the span or distance between supports or points of restraint for a structural member, such as a beam or a column.

Symbol: U_l

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Unsupported Length

Other Formulas to find Slope Correction

Go Slope Correction for Slopes Greater than 10 Percent

Cs = (\frac{h^{2}}{2 \cdot U l}) + (\frac{h^{4}}{8 \cdot {U l}^{3}})

Other formulas in Slope Corrections category

Go Horizontal Distance in Slope Measurements

R = L \cdot \cos (x)

Go Horizontal offset given Slope Correction for Slopes of 10 Percent or Less

ΔH = {(2 \cdot U l \cdot Cs)}^{\frac{1}{2}}

How to Evaluate Slope Correction for Slopes of 10 Percent or Less?

Slope Correction for Slopes of 10 Percent or Less evaluator uses Slope Correction = Difference in Elevation^2/(2*Unsupported Length) to evaluate the Slope Correction, The Slope Correction for Slopes of 10 Percent or Less formula is defined as the measure of the adjustments made to account for errors introduced when measuring slopes that are relatively shallow (i.e., less than or equal to 10%). Slope Correction is denoted by Cs symbol.

How to evaluate Slope Correction for Slopes of 10 Percent or Less using this online evaluator? To use this online evaluator for Slope Correction for Slopes of 10 Percent or Less, enter Difference in Elevation (ΔH) & Unsupported Length (U_l) and hit the calculate button.

FAQs on Slope Correction for Slopes of 10 Percent or Less

What is the formula to find Slope Correction for Slopes of 10 Percent or Less?

The formula of Slope Correction for Slopes of 10 Percent or Less is expressed as Slope Correction = Difference in Elevation^2/(2*Unsupported Length). Here is an example- 12.5 = 15^2/(2*9).

How to calculate Slope Correction for Slopes of 10 Percent or Less?

With Difference in Elevation (ΔH) & Unsupported Length (U_l) we can find Slope Correction for Slopes of 10 Percent or Less using the formula - Slope Correction = Difference in Elevation^2/(2*Unsupported Length).

What are the other ways to Calculate Slope Correction?

Here are the different ways to Calculate Slope Correction-

Slope Correction=((Elevation Difference^2)/(2*Unsupported Length))+(Elevation Difference^4/(8*Unsupported Length^3))

Can the Slope Correction for Slopes of 10 Percent or Less be negative?

No, the Slope Correction for Slopes of 10 Percent or Less, measured in Length cannot be negative.

Which unit is used to measure Slope Correction for Slopes of 10 Percent or Less?

Slope Correction for Slopes of 10 Percent or Less is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Slope Correction for Slopes of 10 Percent or Less can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Slope Correction for Slopes of 10 Percent or Less Formula

​GoSlope Correction for Slopes Greater than 10 Percent Formula

Slope Correction for Slopes of 10 Percent or Less Example

Slope Correction for Slopes of 10 Percent or Less Solution

Slope Correction for Slopes of 10 Percent or Less Formula Elements

Other Formulas to find Slope Correction

Other formulas in Slope Corrections category

How to Evaluate Slope Correction for Slopes of 10 Percent or Less?

FAQs on Slope Correction for Slopes of 10 Percent or Less

Variable Name

GoSlope Correction for Slopes Greater than 10 Percent Formula