FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Skewed Edge Length of Ingot Formula

Fx Copy

LaTeX Copy

Skewed Edge Length of Ingot is the length of any of the lateral edges which connects the corners of top and bottom rectangular faces of the Ingot. Check FAQs

l e(Skewed) = \sqrt{h^{2} + \frac{{(l Large Rectangle - l Small Rectangle)}^{2}}{4} + \frac{{(w Large Rectangle - w Small Rectangle)}^{2}}{4}}

l_e(Skewed) - Skewed Edge Length of Ingot?h - Height of Ingot?l_{Large Rectangle} - Larger Rectangular Length of Ingot?l_{Small Rectangle} - Smaller Rectangular Length of Ingot?w_{Large Rectangle} - Larger Rectangular Width of Ingot?w_{Small Rectangle} - Smaller Rectangular Width of Ingot?

Skewed Edge Length of Ingot Example

With values

With units

Only example

Here is how the Skewed Edge Length of Ingot equation looks like with Values.

Here is how the Skewed Edge Length of Ingot equation looks like with Units.

Here is how the Skewed Edge Length of Ingot equation looks like.

43.3734 = \sqrt{40^{2} + \frac{{(50 - 20)}^{2}}{4} + \frac{{(25 - 10)}^{2}}{4}}

43.3734m = \sqrt{{40m}^{2} + \frac{{(50m - 20m)}^{2}}{4} + \frac{{(25m - 10m)}^{2}}{4}}

43.3734 = \sqrt{40^{2} + \frac{{(50 - 20)}^{2}}{4} + \frac{{(25 - 10)}^{2}}{4}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Math » Category

Geometry » Category

3D Geometry » fx Skewed Edge Length of Ingot

Skewed Edge Length of Ingot Solution

Follow our step by step solution on how to calculate Skewed Edge Length of Ingot?

FIRST Step Consider the formula

l e(Skewed) = \sqrt{h^{2} + \frac{{(l Large Rectangle - l Small Rectangle)}^{2}}{4} + \frac{{(w Large Rectangle - w Small Rectangle)}^{2}}{4}}

Next Step Substitute values of Variables

∴

l e(Skewed) = \sqrt{{40m}^{2} + \frac{{(50m - 20m)}^{2}}{4} + \frac{{(25m - 10m)}^{2}}{4}}

Next Step Prepare to Evaluate

∴

l e(Skewed) = \sqrt{40^{2} + \frac{{(50 - 20)}^{2}}{4} + \frac{{(25 - 10)}^{2}}{4}}

Next Step Evaluate

∴

l e(Skewed) = 43.3733789322437m

LAST Step Rounding Answer

∴

l e(Skewed) = 43.3734m

Skewed Edge Length of Ingot Formula Elements

Variables

Functions

Skewed Edge Length of Ingot

Skewed Edge Length of Ingot is the length of any of the lateral edges which connects the corners of top and bottom rectangular faces of the Ingot.

Symbol: l_e(Skewed)

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Skewed Edge Length of Ingot

Height of Ingot

Height of Ingot is the vertical distance between the top and bottom rectangular faces of the Ingot.

Symbol: h

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Height of Ingot

Larger Rectangular Length of Ingot

Larger Rectangular Length of Ingot is the length of the longer pair of opposite sides of the larger rectangular face of the Ingot.

Symbol: l_{Large Rectangle}

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Larger Rectangular Length of Ingot

Smaller Rectangular Length of Ingot

Smaller Rectangular Length of Ingot is the length of the longer pair of opposite sides of the smaller rectangular face of the Ingot.

Symbol: l_{Small Rectangle}

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Smaller Rectangular Length of Ingot

Larger Rectangular Width of Ingot

Larger Rectangular Width of Ingot is the length of the shorter pair of opposite sides of the larger rectangular face of the Ingot.

Symbol: w_{Large Rectangle}

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Larger Rectangular Width of Ingot

Smaller Rectangular Width of Ingot

Smaller Rectangular Width of Ingot is the length of the shorter pair of opposite sides of the smaller rectangular face of the Ingot.

Symbol: w_{Small Rectangle}

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Smaller Rectangular Width of Ingot

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Length of Ingot category

Go Larger Rectangular Length of Ingot given Length to Width Ratio of Rectangles

l Large Rectangle = R l/w \cdot w Large Rectangle

Go Smaller Rectangular Length of Ingot given Length to Width Ratio of Rectangles

l Small Rectangle = R l/w \cdot w Small Rectangle

How to Evaluate Skewed Edge Length of Ingot?

Skewed Edge Length of Ingot evaluator uses Skewed Edge Length of Ingot = sqrt(Height of Ingot^2+((Larger Rectangular Length of Ingot-Smaller Rectangular Length of Ingot)^2)/4+((Larger Rectangular Width of Ingot-Smaller Rectangular Width of Ingot)^2)/4) to evaluate the Skewed Edge Length of Ingot, Skewed Edge Length of Ingot formula is defined as the length of any of the lateral edges which connects the corners of top and bottom rectangular faces of the Ingot. Skewed Edge Length of Ingot is denoted by l_e(Skewed) symbol.

How to evaluate Skewed Edge Length of Ingot using this online evaluator? To use this online evaluator for Skewed Edge Length of Ingot, enter Height of Ingot (h), Larger Rectangular Length of Ingot (l_{Large Rectangle}), Smaller Rectangular Length of Ingot (l_{Small Rectangle}), Larger Rectangular Width of Ingot (w_{Large Rectangle}) & Smaller Rectangular Width of Ingot (w_{Small Rectangle}) and hit the calculate button.

FAQs on Skewed Edge Length of Ingot

What is the formula to find Skewed Edge Length of Ingot?

The formula of Skewed Edge Length of Ingot is expressed as Skewed Edge Length of Ingot = sqrt(Height of Ingot^2+((Larger Rectangular Length of Ingot-Smaller Rectangular Length of Ingot)^2)/4+((Larger Rectangular Width of Ingot-Smaller Rectangular Width of Ingot)^2)/4). Here is an example- 43.37338 = sqrt(40^2+((50-20)^2)/4+((25-10)^2)/4).

How to calculate Skewed Edge Length of Ingot?

With Height of Ingot (h), Larger Rectangular Length of Ingot (l_{Large Rectangle}), Smaller Rectangular Length of Ingot (l_{Small Rectangle}), Larger Rectangular Width of Ingot (w_{Large Rectangle}) & Smaller Rectangular Width of Ingot (w_{Small Rectangle}) we can find Skewed Edge Length of Ingot using the formula - Skewed Edge Length of Ingot = sqrt(Height of Ingot^2+((Larger Rectangular Length of Ingot-Smaller Rectangular Length of Ingot)^2)/4+((Larger Rectangular Width of Ingot-Smaller Rectangular Width of Ingot)^2)/4). This formula also uses Square Root (sqrt) function(s).

Can the Skewed Edge Length of Ingot be negative?

No, the Skewed Edge Length of Ingot, measured in Length cannot be negative.

Which unit is used to measure Skewed Edge Length of Ingot?

Skewed Edge Length of Ingot is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Skewed Edge Length of Ingot can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Skewed Edge Length of Ingot Formula

Skewed Edge Length of Ingot Example

Skewed Edge Length of Ingot Solution

Skewed Edge Length of Ingot Formula Elements

Other formulas in Length of Ingot category

How to Evaluate Skewed Edge Length of Ingot?

FAQs on Skewed Edge Length of Ingot

Variable Name