FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Sewer System Length given Total Infiltration to Sanitary Sewer Formula

Fx Copy

LaTeX Copy

Length of a Sanitary Sewer refers to the total distance covered by the sewer pipes within a specific section or the entire network. Check FAQs

L = \frac{I}{F}

L - Length of a Sanitary Sewer?I - Infiltration?F - Actual Infiltration?

Sewer System Length given Total Infiltration to Sanitary Sewer Example

With values

With units

Only example

Here is how the Sewer System Length given Total Infiltration to Sanitary Sewer equation looks like with Values.

Here is how the Sewer System Length given Total Infiltration to Sanitary Sewer equation looks like with Units.

Here is how the Sewer System Length given Total Infiltration to Sanitary Sewer equation looks like.

0.3333 = \frac{30}{90}

0.3333m = \frac{30m²/s}{90m³/s}

0.3333 = \frac{30}{90}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Sewer System Length given Total Infiltration to Sanitary Sewer

Sewer System Length given Total Infiltration to Sanitary Sewer Solution

Follow our step by step solution on how to calculate Sewer System Length given Total Infiltration to Sanitary Sewer?

FIRST Step Consider the formula

L = \frac{I}{F}

Next Step Substitute values of Variables

∴

L = \frac{30m²/s}{90m³/s}

Next Step Prepare to Evaluate

∴

L = \frac{30}{90}

Next Step Evaluate

∴

L = 0.333333333333333m

LAST Step Rounding Answer

∴

L = 0.3333m

Sewer System Length given Total Infiltration to Sanitary Sewer Formula Elements

Variables

Length of a Sanitary Sewer

Length of a Sanitary Sewer refers to the total distance covered by the sewer pipes within a specific section or the entire network.

Symbol: L

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length of a Sanitary Sewer

Infiltration

Infiltration is the process by which water on the ground surface enters the soil. It is commonly used in both hydrology and soil sciences.

Symbol: I

Measurement: Kinematic ViscosityUnit: m²/s

Note: Value should be greater than 0.

Formulas to find Infiltration

Actual Infiltration

Actual Infiltration refers to the process of water entry into the soil through the Earth's surface.

Symbol: F

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value can be positive or negative.

Formulas to find Actual Infiltration

Other formulas in Sanitary System Sewer Design category

Go Flow Rate through Pipe using Manning Formula

W = C f \cdot \frac{{(i)}^{1}}{2}

Go Manning's Formula for Conveyance Factor given Flow Rate through Pipe

C f = \frac{W}{\sqrt{i}}

Go Manning's Formula for Pipe Slope given Flow Rate through Pipe

i = {(\frac{W}{C f})}^{2}

Go Sanitary Sewer System Flow Rate

SS fr = A \cdot P d \cdot Q

How to Evaluate Sewer System Length given Total Infiltration to Sanitary Sewer?

Sewer System Length given Total Infiltration to Sanitary Sewer evaluator uses Length of a Sanitary Sewer = Infiltration/Actual Infiltration to evaluate the Length of a Sanitary Sewer, The Sewer System Length given Total Infiltration to Sanitary Sewer formula is defined as the total distance covered by the sewer pipes within a specific section or the entire network. This measurement is crucial for various aspects of sewer system design, operation, maintenance, and management. Length of a Sanitary Sewer is denoted by L symbol.

How to evaluate Sewer System Length given Total Infiltration to Sanitary Sewer using this online evaluator? To use this online evaluator for Sewer System Length given Total Infiltration to Sanitary Sewer, enter Infiltration (I) & Actual Infiltration (F) and hit the calculate button.

FAQs on Sewer System Length given Total Infiltration to Sanitary Sewer

What is the formula to find Sewer System Length given Total Infiltration to Sanitary Sewer?

The formula of Sewer System Length given Total Infiltration to Sanitary Sewer is expressed as Length of a Sanitary Sewer = Infiltration/Actual Infiltration. Here is an example- 0.333333 = 30/90.

How to calculate Sewer System Length given Total Infiltration to Sanitary Sewer?

With Infiltration (I) & Actual Infiltration (F) we can find Sewer System Length given Total Infiltration to Sanitary Sewer using the formula - Length of a Sanitary Sewer = Infiltration/Actual Infiltration.

Can the Sewer System Length given Total Infiltration to Sanitary Sewer be negative?

No, the Sewer System Length given Total Infiltration to Sanitary Sewer, measured in Length cannot be negative.

Which unit is used to measure Sewer System Length given Total Infiltration to Sanitary Sewer?

Sewer System Length given Total Infiltration to Sanitary Sewer is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Sewer System Length given Total Infiltration to Sanitary Sewer can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit