FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Settling Length given Pressure Drop Formula

GoSettling Length given Prestressing Force Immediately after Loss Formula

Fx Copy

LaTeX Copy

Settling Length is the length where the effect of anchorage friction is absent. Check FAQs

l set = \frac{Δf p}{2 \cdot η \cdot P}

l_set - Settling Length?Δf_p - Prestress Drop?η - Simplified Term?P - Prestressing force after Immediate Losses?

Settling Length given Pressure Drop Example

With values

With units

Only example

Here is how the Settling Length given Pressure Drop equation looks like with Values.

Here is how the Settling Length given Pressure Drop equation looks like with Units.

Here is how the Settling Length given Pressure Drop equation looks like.

41.6458 = \frac{10}{2 \cdot 6 \cdot 20.01}

41.6458m = \frac{10MPa}{2 \cdot 6 \cdot 20.01kN}

41.6458 = \frac{10}{2 \cdot 6 \cdot 20.01}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Structural Engineering » fx Settling Length given Pressure Drop

Settling Length given Pressure Drop Solution

Follow our step by step solution on how to calculate Settling Length given Pressure Drop?

FIRST Step Consider the formula

l set = \frac{Δf p}{2 \cdot η \cdot P}

Next Step Substitute values of Variables

∴

l set = \frac{10MPa}{2 \cdot 6 \cdot 20.01kN}

Next Step Convert Units

∴

l set = \frac{1E+7Pa}{2 \cdot 6 \cdot 20010N}

Next Step Prepare to Evaluate

∴

l set = \frac{1E+7}{2 \cdot 6 \cdot 20010}

Next Step Evaluate

∴

l set = 41.6458437447943m

LAST Step Rounding Answer

∴

l set = 41.6458m

Settling Length given Pressure Drop Formula Elements

Variables

Settling Length

Settling Length is the length where the effect of anchorage friction is absent.

Symbol: l_set

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Settling Length

Prestress Drop

Prestress Drop is the drop in applied prestress force due to strain in tendons.

Symbol: Δf_p

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Prestress Drop

Simplified Term

Simplified Term here represents the value which is equal to (μa+kx)/x.

Symbol: η

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Simplified Term

Prestressing force after Immediate Losses

Prestressing force after Immediate Losses is force after immediate losses. It is also called as reduced value of prestressing force after elastic shortening, anchorage slip and loss due to friction.

Symbol: P

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Prestressing force after Immediate Losses

Other Formulas to find Settling Length

Go Settling Length given Prestressing Force Immediately after Loss

l set = \sqrt{Δ \cdot A p \cdot \frac{E s}{P \cdot η}}

Other formulas in Force Variation Diagram and Loss Due to Anchorage Slip category

Go Loss of Prestress due to Slip

F = A Tendon \cdot \frac{E s \cdot Δ}{PL Cable}

Go Slip of Anchorage

Δ = F \cdot \frac{PL Cable}{A Tendon \cdot E s}

Go Prestressing Force at distance x when Reverse Friction is Considered

P x = (P - Δf p) \cdot \exp (η \cdot x)

Go Prestressing Force after Immediate Loss when Reverse Friction Effect is Considered

P = (\frac{P x}{\exp (η \cdot x)}) + Δf p

How to Evaluate Settling Length given Pressure Drop?

Settling Length given Pressure Drop evaluator uses Settling Length = Prestress Drop/(2*Simplified Term*Prestressing force after Immediate Losses) to evaluate the Settling Length, The Settling Length given Pressure Drop is defined as the equation to find out length of beam from which effect of anchorage slip is absent. Settling Length is denoted by l_set symbol.

How to evaluate Settling Length given Pressure Drop using this online evaluator? To use this online evaluator for Settling Length given Pressure Drop, enter Prestress Drop (Δf_p), Simplified Term (η) & Prestressing force after Immediate Losses (P) and hit the calculate button.

FAQs on Settling Length given Pressure Drop

What is the formula to find Settling Length given Pressure Drop?

The formula of Settling Length given Pressure Drop is expressed as Settling Length = Prestress Drop/(2*Simplified Term*Prestressing force after Immediate Losses). Here is an example- 41.66667 = 10000000/(2*6*prestressing_force_po).

How to calculate Settling Length given Pressure Drop?

With Prestress Drop (Δf_p), Simplified Term (η) & Prestressing force after Immediate Losses (P) we can find Settling Length given Pressure Drop using the formula - Settling Length = Prestress Drop/(2*Simplified Term*Prestressing force after Immediate Losses).

What are the other ways to Calculate Settling Length?

Here are the different ways to Calculate Settling Length-

Settling Length=sqrt(Slip of Anchorage*Steel Area in Prestress*Modulus of Elasticity of Steel Reinforcement/(Prestressing force after Immediate Losses*Simplified Term))

Can the Settling Length given Pressure Drop be negative?

No, the Settling Length given Pressure Drop, measured in Length cannot be negative.

Which unit is used to measure Settling Length given Pressure Drop?

Settling Length given Pressure Drop is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Settling Length given Pressure Drop can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Settling Length given Pressure Drop Formula

​GoSettling Length given Prestressing Force Immediately after Loss Formula

Settling Length given Pressure Drop Example

Settling Length given Pressure Drop Solution

Settling Length given Pressure Drop Formula Elements

Other Formulas to find Settling Length

Other formulas in Force Variation Diagram and Loss Due to Anchorage Slip category

How to Evaluate Settling Length given Pressure Drop?

FAQs on Settling Length given Pressure Drop

Variable Name

GoSettling Length given Prestressing Force Immediately after Loss Formula