FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Safe tensile stress in plate Formula

GoSafe tensile stress given area of base plate and tensile load Formula

Fx Copy

LaTeX Copy

Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force. Check FAQs

σ t = \frac{P load}{(p - D rivet) \cdot t plate}

σ_t - Tensile Stress?P_load - Tensile Load?p - Pitch of Rivet?D_rivet - Rivet Diameter?t_plate - Thickness of Plate?

Safe tensile stress in plate Example

With values

With units

Only example

Here is how the Safe tensile stress in plate equation looks like with Values.

Here is how the Safe tensile stress in plate equation looks like with Units.

Here is how the Safe tensile stress in plate equation looks like.

0.5 = \frac{0.012}{(20 - 18) \cdot 12}

0.5MPa = \frac{0.012kN}{(20mm - 18mm) \cdot 12mm}

0.5 = \frac{0.012}{(20 - 18) \cdot 12}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Safe tensile stress in plate

Safe tensile stress in plate Solution

Follow our step by step solution on how to calculate Safe tensile stress in plate?

FIRST Step Consider the formula

σ t = \frac{P load}{(p - D rivet) \cdot t plate}

Next Step Substitute values of Variables

∴

σ t = \frac{0.012kN}{(20mm - 18mm) \cdot 12mm}

Next Step Convert Units

∴

σ t = \frac{12N}{(0.02m - 0.018m) \cdot 0.012m}

Next Step Prepare to Evaluate

∴

σ t = \frac{12}{(0.02 - 0.018) \cdot 0.012}

Next Step Evaluate

∴

σ t = 500000Pa

LAST Step Convert to Output's Unit

∴

σ t = 0.5MPa

Safe tensile stress in plate Formula Elements

Variables

Tensile Stress

Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Tensile Load

Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.

Symbol: P_load

Measurement: ForceUnit: kN

Note: Value can be positive or negative.

Formulas to find Tensile Load

Pitch of Rivet

Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.

Symbol: p

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Pitch of Rivet

Rivet Diameter

Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

Symbol: D_rivet

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Rivet Diameter

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Other Formulas to find Tensile Stress

Go Safe tensile stress given area of base plate and tensile load

σ t = \frac{P load}{A b}

Other formulas in Failure Due to Tearing of the Plate Between Rivets of a Row category

Go Safe tensile load that plate can withstand given area of plate

P load = σ t \cdot A b

Go Area of plate for given safe tensile load that plate can withstand

A b = \frac{P load}{σ t}

Go Safe tensile load that plate can withstand

P load = σ t \cdot (p - D rivet) \cdot t plate

Go Pitch of rivet given safe tensile load that plate can withstand

p = (\frac{P load}{σ t \cdot t plate}) + D rivet

How to Evaluate Safe tensile stress in plate?

Safe tensile stress in plate evaluator uses Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate) to evaluate the Tensile Stress, Safe tensile stress in plate is defined as the ratio between the strength of the material and the maximum stress in the part. Tensile Stress is denoted by σ_t symbol.

How to evaluate Safe tensile stress in plate using this online evaluator? To use this online evaluator for Safe tensile stress in plate, enter Tensile Load (P_load), Pitch of Rivet (p), Rivet Diameter (D_rivet) & Thickness of Plate (t_plate) and hit the calculate button.

FAQs on Safe tensile stress in plate

What is the formula to find Safe tensile stress in plate?

The formula of Safe tensile stress in plate is expressed as Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate). Here is an example- 0.0004 = 12/((0.02-0.018)*0.012).

How to calculate Safe tensile stress in plate?

With Tensile Load (P_load), Pitch of Rivet (p), Rivet Diameter (D_rivet) & Thickness of Plate (t_plate) we can find Safe tensile stress in plate using the formula - Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate).

What are the other ways to Calculate Tensile Stress?

Here are the different ways to Calculate Tensile Stress-

Tensile Stress=Tensile Load/Area of Base Plate

Can the Safe tensile stress in plate be negative?

No, the Safe tensile stress in plate, measured in Pressure cannot be negative.

Which unit is used to measure Safe tensile stress in plate?

Safe tensile stress in plate is usually measured using the Megapascal[MPa] for Pressure. Pascal[MPa], Kilopascal[MPa], Bar[MPa] are the few other units in which Safe tensile stress in plate can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Safe tensile stress in plate Formula

​GoSafe tensile stress given area of base plate and tensile load Formula

Safe tensile stress in plate Example

Safe tensile stress in plate Solution

Safe tensile stress in plate Formula Elements

Other Formulas to find Tensile Stress

Other formulas in Failure Due to Tearing of the Plate Between Rivets of a Row category

How to Evaluate Safe tensile stress in plate?

FAQs on Safe tensile stress in plate

Variable Name

GoSafe tensile stress given area of base plate and tensile load Formula