FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear Formula

GoSafe Load per Pitch Length using Single Rivet Lap Joint Formula

GoSafe Load per Pitch Length using Double Rivet Lap Joint Formula

Fx Copy

LaTeX Copy

Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device. Check FAQs

P safe = (2 \cdot (\frac{π}{4}) \cdot ({D rivet}^{2}) \cdot T safe)

P_safe - Safe Load Joint?D_rivet - Rivet Diameter?T_safe - Safe Shear Stress?π - Archimedes' constant?

Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear Example

With values

With units

Only example

Here is how the Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear equation looks like with Values.

Here is how the Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear equation looks like with Units.

Here is how the Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear equation looks like.

0.1221 = (2 \cdot (\frac{3.1416}{4}) \cdot (18^{2}) \cdot 0.24)

0.1221kN = (2 \cdot (\frac{3.1416}{4}) \cdot ({18mm}^{2}) \cdot 0.24MPa)

0.1221 = (2 \cdot (\frac{3.1416}{4}) \cdot (18^{2}) \cdot 0.24)

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear

Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear Solution

Follow our step by step solution on how to calculate Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear?

FIRST Step Consider the formula

P safe = (2 \cdot (\frac{π}{4}) \cdot ({D rivet}^{2}) \cdot T safe)

Next Step Substitute values of Variables

∴

P safe = (2 \cdot (\frac{π}{4}) \cdot ({18mm}^{2}) \cdot 0.24MPa)

Next Step Substitute values of Constants

∴

P safe = (2 \cdot (\frac{3.1416}{4}) \cdot ({18mm}^{2}) \cdot 0.24MPa)

Next Step Convert Units

∴

P safe = (2 \cdot (\frac{3.1416}{4}) \cdot ({0.018m}^{2}) \cdot 240000Pa)

Next Step Prepare to Evaluate

∴

P safe = (2 \cdot (\frac{3.1416}{4}) \cdot ({0.018}^{2}) \cdot 240000)

Next Step Evaluate

∴

P safe = 122.145122371571N

Next Step Convert to Output's Unit

∴

P safe = 0.122145122371571kN

LAST Step Rounding Answer

∴

P safe = 0.1221kN

Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear Formula Elements

Variables

Constants

Safe Load Joint

Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.

Symbol: P_safe

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Safe Load Joint

Rivet Diameter

Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

Symbol: D_rivet

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Rivet Diameter

Safe Shear Stress

Safe shear stress is always less than the yield shear stress.

Symbol: T_safe

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Safe Shear Stress

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

Other Formulas to find Safe Load Joint

Go Safe Load per Pitch Length using Single Rivet Lap Joint

P safe = (1 \cdot (\frac{π}{4}) \cdot ({D rivet}^{2}) \cdot T safe)

Go Safe Load per Pitch Length using Double Rivet Lap Joint

P safe = (2 \cdot (\frac{π}{4}) \cdot ({D rivet}^{2}) \cdot T safe)

Go Safe load per pitch length given triple-rivet lap joint

P safe = (3 \cdot (\frac{π}{4}) \cdot ({D rivet}^{2}) \cdot T safe)

Go Safe Load per Pitch Length using Single Rivet Butt Joint with Single Cover Plates

P safe = (1 \cdot (\frac{π}{4}) \cdot ({D rivet}^{2}) \cdot T safe)

Other formulas in Failure Due to Shearing of Rivet category

Go Diameter of rivet given safe load per pitch length in single rivet lap joint

D rivet = \sqrt{\frac{P safe}{1 \cdot (\frac{π}{4}) \cdot T safe}}

Go Diameter of rivet given safe load per pitch length in double rivet lap joint

D rivet = \sqrt{\frac{P safe}{2 \cdot (\frac{π}{4}) \cdot T safe}}

Go Diameter of rivet given safe load per pitch length in triple-rivet lap joint

D rivet = \sqrt{\frac{P safe}{3 \cdot (\frac{π}{4}) \cdot T safe}}

Go Diameter of rivet given safe load for single rivet butt joint with single cover plates

D rivet = \sqrt{\frac{P safe}{1 \cdot (\frac{π}{4}) \cdot T safe}}

How to Evaluate Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear?

Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear evaluator uses Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress) to evaluate the Safe Load Joint, The Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear formula is defined as a load on a structure that does not produce stresses in excess of allowable stresses. Safe Load Joint is denoted by P_safe symbol.

How to evaluate Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear using this online evaluator? To use this online evaluator for Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear, enter Rivet Diameter (D_rivet) & Safe Shear Stress (T_safe) and hit the calculate button.

FAQs on Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear

What is the formula to find Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear?

The formula of Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear is expressed as Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress). Here is an example- 0.000217 = (2*(pi/4)*(0.018^2)*240000).

How to calculate Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear?

With Rivet Diameter (D_rivet) & Safe Shear Stress (T_safe) we can find Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear using the formula - Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress). This formula also uses Archimedes' constant .

What are the other ways to Calculate Safe Load Joint?

Here are the different ways to Calculate Safe Load Joint-

Safe Load Joint=(1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)
Safe Load Joint=(2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)
Safe Load Joint=(3*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Can the Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear be negative?

Yes, the Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear, measured in Force can be negative.

Which unit is used to measure Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear?

Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear is usually measured using the Kilonewton[kN] for Force. Newton[kN], Exanewton[kN], Meganewton[kN] are the few other units in which Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear Formula

​GoSafe Load per Pitch Length using Single Rivet Lap Joint Formula

​GoSafe Load per Pitch Length using Double Rivet Lap Joint Formula

Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear Example

Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear Solution

Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear Formula Elements

Other Formulas to find Safe Load Joint

Other formulas in Failure Due to Shearing of Rivet category

How to Evaluate Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear?

FAQs on Safe Load per Pitch Length using Butt Joint with Double Cover Plates and Double Shear

Variable Name

GoSafe Load per Pitch Length using Single Rivet Lap Joint Formula

GoSafe Load per Pitch Length using Double Rivet Lap Joint Formula