FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) Formula

GoRMS Voltage using Line Losses (1-Phase 2-Wire Mid-Point Earthed) Formula

GoRMS Voltage using Area of X-Section (1-Phase 2-Wire Mid-Point Earthed) Formula

Fx Copy

LaTeX Copy

Root Mean Square Voltage is the square root of the time average of the voltage squared. Check FAQs

V rms = \frac{P}{I \cdot \cos (Φ)}

V_rms - Root Mean Square Voltage?P - Power Transmitted?I - Current Underground AC?Φ - Phase Difference?

RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) Example

With values

With units

Only example

Here is how the RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) equation looks like with Values.

Here is how the RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) equation looks like with Units.

Here is how the RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) equation looks like.

38.49 = \frac{300}{9 \cdot \cos (30)}

38.49V = \frac{300W}{9A \cdot \cos (30°)}

38.49 = \frac{300}{9 \cdot \cos (30)}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power System » fx RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed)

RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) Solution

Follow our step by step solution on how to calculate RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed)?

FIRST Step Consider the formula

V rms = \frac{P}{I \cdot \cos (Φ)}

Next Step Substitute values of Variables

∴

V rms = \frac{300W}{9A \cdot \cos (30°)}

Next Step Convert Units

∴

V rms = \frac{300W}{9A \cdot \cos (0.5236rad)}

Next Step Prepare to Evaluate

∴

V rms = \frac{300}{9 \cdot \cos (0.5236)}

Next Step Evaluate

∴

V rms = 38.4900179459751V

LAST Step Rounding Answer

∴

V rms = 38.49V

RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) Formula Elements

Variables

Functions

Root Mean Square Voltage

Root Mean Square Voltage is the square root of the time average of the voltage squared.

Symbol: V_rms

Measurement: Electric PotentialUnit: V

Note: Value should be greater than 0.

Formulas to find Root Mean Square Voltage

Power Transmitted

Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work.

Symbol: P

Measurement: PowerUnit: W

Note: Value can be positive or negative.

Formulas to find Power Transmitted

Current Underground AC

Current Underground AC is defined as the current flowing through the overhead ac supply wire.

Symbol: I

Measurement: Electric CurrentUnit: A

Note: Value can be positive or negative.

Formulas to find Current Underground AC

Phase Difference

Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.

Symbol: Φ

Measurement: AngleUnit: °

Note: Value should be greater than 0.

Formulas to find Phase Difference

cos

Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle.

Syntax: cos(Angle)

Other Formulas to find Root Mean Square Voltage

Go RMS Voltage using Line Losses (1-Phase 2-Wire Mid-Point Earthed)

V rms = (\frac{P}{\cos (Φ)}) \cdot \sqrt{\frac{2 \cdot R}{P loss}}

Go RMS Voltage using Area of X-Section (1-Phase 2-Wire Mid-Point Earthed)

V rms = (\frac{P}{\cos (Φ)}) \cdot \sqrt{2 \cdot ρ \cdot \frac{L}{A \cdot P loss}}

Other formulas in Current and Voltage category

Go Load Current (1-Phase 2-Wire Mid-Point Earthed)

I = \frac{\sqrt{2} \cdot P}{V m \cdot \cos (Φ)}

Go Load Current using Line Losses (1-Phase 2-Wire Mid-Point Earthed)

I = \sqrt{\frac{P loss}{2 \cdot R}}

Go Maximum Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed)

V m = \frac{\sqrt{2} \cdot P}{I \cdot \cos (Φ)}

Go Maximum Voltage using Line Losses (1-Phase 2-Wire Mid-Point Earthed)

V m = (\frac{2 \cdot P}{\cos (Φ)}) \cdot \sqrt{\frac{R}{P loss}}

How to Evaluate RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed)?

RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) evaluator uses Root Mean Square Voltage = Power Transmitted/(Current Underground AC*cos(Phase Difference)) to evaluate the Root Mean Square Voltage, The RMS Voltage using Load Current (1-phase 2-wire Mid-point Earthed) formula is defined as the square root of the time average of the voltage squared. Root Mean Square Voltage is denoted by V_rms symbol.

How to evaluate RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) using this online evaluator? To use this online evaluator for RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed), enter Power Transmitted (P), Current Underground AC (I) & Phase Difference (Φ) and hit the calculate button.

FAQs on RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed)

What is the formula to find RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed)?

The formula of RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) is expressed as Root Mean Square Voltage = Power Transmitted/(Current Underground AC*cos(Phase Difference)). Here is an example- 38.49002 = 300/(9*cos(0.5235987755982)).

How to calculate RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed)?

With Power Transmitted (P), Current Underground AC (I) & Phase Difference (Φ) we can find RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) using the formula - Root Mean Square Voltage = Power Transmitted/(Current Underground AC*cos(Phase Difference)). This formula also uses Cosine (cos) function(s).

What are the other ways to Calculate Root Mean Square Voltage?

Here are the different ways to Calculate Root Mean Square Voltage-

Root Mean Square Voltage=(Power Transmitted/cos(Phase Difference))*sqrt((2*Resistance Underground AC)/Line Losses)
Root Mean Square Voltage=(Power Transmitted/cos(Phase Difference))*sqrt(2*Resistivity*Length of Underground AC Wire/(Area of Underground AC Wire*Line Losses))

Can the RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) be negative?

No, the RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed), measured in Electric Potential cannot be negative.

Which unit is used to measure RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed)?

RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) is usually measured using the Volt[V] for Electric Potential. Millivolt[V], Microvolt[V], Nanovolt[V] are the few other units in which RMS Voltage using Load Current (1-Phase 2-Wire Mid-Point Earthed) can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit