FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

RMS Incident Power of Detector Formula

Fx Copy

LaTeX Copy

Root Mean Square Incident Power of Detector refers to the power of the incoming signal or radiation incident on the detector surface. Check FAQs

P rms = \frac{V rms}{R d}

P_rms - Root Mean Square Incident Power of Detector?V_rms - Root Mean Square Voltage Output?R_d - Detector Responsivity?

RMS Incident Power of Detector Example

With values

With units

Only example

Here is how the RMS Incident Power of Detector equation looks like with Values.

Here is how the RMS Incident Power of Detector equation looks like with Units.

Here is how the RMS Incident Power of Detector equation looks like.

5.404 = \frac{81.6}{15.1}

5.404W = \frac{81.6V}{15.1A/W}

5.404 = \frac{81.6}{15.1}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electronics and Instrumentation » Category

Transducers » fx RMS Incident Power of Detector

RMS Incident Power of Detector Solution

Follow our step by step solution on how to calculate RMS Incident Power of Detector?

FIRST Step Consider the formula

P rms = \frac{V rms}{R d}

Next Step Substitute values of Variables

∴

P rms = \frac{81.6V}{15.1A/W}

Next Step Prepare to Evaluate

∴

P rms = \frac{81.6}{15.1}

Next Step Evaluate

∴

P rms = 5.40397350993377W

LAST Step Rounding Answer

∴

P rms = 5.404W

RMS Incident Power of Detector Formula Elements

Variables

Root Mean Square Incident Power of Detector

Root Mean Square Incident Power of Detector refers to the power of the incoming signal or radiation incident on the detector surface.

Symbol: P_rms

Measurement: PowerUnit: W

Note: Value should be greater than 0.

Formulas to find Root Mean Square Incident Power of Detector

Root Mean Square Voltage Output

Root Mean Square Voltage Output is the measure of transducer average voltage output. It provides a standardized representation of the transducer's signal strength.

Symbol: V_rms

Measurement: Electric PotentialUnit: V

Note: Value should be greater than 0.

Formulas to find Root Mean Square Voltage Output

Detector Responsivity

Detector Responsivity is defined as measures of the input-output gain of a detector system.

Symbol: R_d

Measurement: ResponsivityUnit: A/W

Note: Value should be greater than 0.

Formulas to find Detector Responsivity

Other formulas in Transducers category

Go Sensitivity of Photoresistive Transducer

ΔS = \frac{ΔR}{ΔH}

Go Change in Resistance

ΔR = ΔH \cdot ΔS

Go Current Generator Capacitance

C g = C t + C amp + C cable

Go Capacitance of Transducer

C t = C g - (C amp + C cable)

How to Evaluate RMS Incident Power of Detector?

RMS Incident Power of Detector evaluator uses Root Mean Square Incident Power of Detector = Root Mean Square Voltage Output/Detector Responsivity to evaluate the Root Mean Square Incident Power of Detector, The RMS Incident power of Detector formula is defined as the average power level that the detector receives based on the voltage it outputs and its efficiency in converting incident power to voltage. Root Mean Square Incident Power of Detector is denoted by P_rms symbol.

How to evaluate RMS Incident Power of Detector using this online evaluator? To use this online evaluator for RMS Incident Power of Detector, enter Root Mean Square Voltage Output (V_rms) & Detector Responsivity (R_d) and hit the calculate button.

FAQs on RMS Incident Power of Detector

What is the formula to find RMS Incident Power of Detector?

The formula of RMS Incident Power of Detector is expressed as Root Mean Square Incident Power of Detector = Root Mean Square Voltage Output/Detector Responsivity. Here is an example- 0.24702 = 81.6/15.1.

How to calculate RMS Incident Power of Detector?

With Root Mean Square Voltage Output (V_rms) & Detector Responsivity (R_d) we can find RMS Incident Power of Detector using the formula - Root Mean Square Incident Power of Detector = Root Mean Square Voltage Output/Detector Responsivity.

Can the RMS Incident Power of Detector be negative?

No, the RMS Incident Power of Detector, measured in Power cannot be negative.

Which unit is used to measure RMS Incident Power of Detector?

RMS Incident Power of Detector is usually measured using the Watt[W] for Power. Kilowatt[W], Milliwatt[W], Microwatt[W] are the few other units in which RMS Incident Power of Detector can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

RMS Incident Power of Detector Formula

RMS Incident Power of Detector Example

RMS Incident Power of Detector Solution

RMS Incident Power of Detector Formula Elements

Other formulas in Transducers category

How to Evaluate RMS Incident Power of Detector?

FAQs on RMS Incident Power of Detector

Variable Name