FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

RMS Diode Current of Three Phase Uncontrolled Rectifier Formula

Fx Copy

LaTeX Copy

RMS diode current is a measure of the effective or equivalent current through a diode in an alternating current (AC) circuit. Check FAQs

I d(rms) = \frac{n \cdot V max}{R L \cdot \sqrt{2}} \cdot \sqrt{\frac{1}{3} + \frac{\sqrt{3}}{4 \cdot π}}

I_d(rms) - RMS Diode Current?n - Winding Ratio?V_max - Peak Input Voltage?R_L - Load Resistance?π - Archimedes' constant?

RMS Diode Current of Three Phase Uncontrolled Rectifier Example

With values

With units

Only example

Here is how the RMS Diode Current of Three Phase Uncontrolled Rectifier equation looks like with Values.

Here is how the RMS Diode Current of Three Phase Uncontrolled Rectifier equation looks like with Units.

Here is how the RMS Diode Current of Three Phase Uncontrolled Rectifier equation looks like.

229.144 = \frac{15 \cdot 220}{6.99 \cdot \sqrt{2}} \cdot \sqrt{\frac{1}{3} + \frac{\sqrt{3}}{4 \cdot 3.1416}}

229.144A = \frac{15 \cdot 220V}{6.99Ω \cdot \sqrt{2}} \cdot \sqrt{\frac{1}{3} + \frac{\sqrt{3}}{4 \cdot 3.1416}}

229.144 = \frac{15 \cdot 220}{6.99 \cdot \sqrt{2}} \cdot \sqrt{\frac{1}{3} + \frac{\sqrt{3}}{4 \cdot 3.1416}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power Electronics » fx RMS Diode Current of Three Phase Uncontrolled Rectifier

RMS Diode Current of Three Phase Uncontrolled Rectifier Solution

Follow our step by step solution on how to calculate RMS Diode Current of Three Phase Uncontrolled Rectifier?

FIRST Step Consider the formula

I d(rms) = \frac{n \cdot V max}{R L \cdot \sqrt{2}} \cdot \sqrt{\frac{1}{3} + \frac{\sqrt{3}}{4 \cdot π}}

Next Step Substitute values of Variables

∴

I d(rms) = \frac{15 \cdot 220V}{6.99Ω \cdot \sqrt{2}} \cdot \sqrt{\frac{1}{3} + \frac{\sqrt{3}}{4 \cdot π}}

Next Step Substitute values of Constants

∴

I d(rms) = \frac{15 \cdot 220V}{6.99Ω \cdot \sqrt{2}} \cdot \sqrt{\frac{1}{3} + \frac{\sqrt{3}}{4 \cdot 3.1416}}

Next Step Prepare to Evaluate

∴

I d(rms) = \frac{15 \cdot 220}{6.99 \cdot \sqrt{2}} \cdot \sqrt{\frac{1}{3} + \frac{\sqrt{3}}{4 \cdot 3.1416}}

Next Step Evaluate

∴

I d(rms) = 229.144023236634A

LAST Step Rounding Answer

∴

I d(rms) = 229.144A

RMS Diode Current of Three Phase Uncontrolled Rectifier Formula Elements

Variables

Constants

Functions

RMS Diode Current

RMS diode current is a measure of the effective or equivalent current through a diode in an alternating current (AC) circuit.

Symbol: I_d(rms)

Measurement: Electric CurrentUnit: A

Note: Value should be greater than 0.

Formulas to find RMS Diode Current

Winding Ratio

Winding Ratio of an uncontrolled rectifier is the ratio of the number of turns on the primary winding to the number of turns on the secondary winding of the transformer.

Symbol: n

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Winding Ratio

Peak Input Voltage

Peak Input Voltage is the peak of the alternating voltage provided at the input of any electrical circuit.

Symbol: V_max

Measurement: Electric PotentialUnit: V

Note: Value should be greater than 0.

Formulas to find Peak Input Voltage

Load Resistance

Load Resistance of uncontrolled rectifier is a type of rectifier circuit that uses a resistive load to convert AC voltage to DC voltage.

Symbol: R_L

Measurement: Electric ResistanceUnit: Ω

Note: Value should be greater than 0.

Formulas to find Load Resistance

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Full Wave category

Go Load Voltage of Full Wave Three Phase Uncontrolled Rectifier

V ac = \frac{2 \cdot n \cdot V max}{π}

Go Average Load Current of Three Phase Uncontrolled Rectifier

I L(avg) = \frac{3 \cdot \sqrt{3} \cdot n \cdot V max}{2 \cdot π \cdot R L}

Go Power Delivered to Load in Three Phase Uncontrolled Rectifier

P out = V ac \cdot V dc

Go RMS Load Current of Three Phase Uncontrolled Rectifier

I L(rms) = \frac{n \cdot V max}{R L \cdot \sqrt{2}} \cdot \sqrt{1 + \frac{3 \cdot \sqrt{3}}{2 \cdot π}}

How to Evaluate RMS Diode Current of Three Phase Uncontrolled Rectifier?

RMS Diode Current of Three Phase Uncontrolled Rectifier evaluator uses RMS Diode Current = (Winding Ratio*Peak Input Voltage)/(Load Resistance*sqrt(2))*sqrt(1/3+sqrt(3)/(4*pi)) to evaluate the RMS Diode Current, RMS Diode Current of Three Phase Uncontrolled Rectifier is the effective value of the current that flows through each diode. The RMS value of the diode current in a three-phase uncontrolled rectifier is the same as the RMS load current. This is because the load current is divided equally among the three diodes in the rectifier circuit. The RMS diode current in a three-phase uncontrolled rectifier is typically higher than the RMS diode current in a single-phase uncontrolled rectifier. This is because the three-phase rectifier has a lower ripple factor than the single-phase rectifier. The ripple factor is a measure of how much AC component is present in the DC output voltage. A lower ripple factor means that the DC output voltage is closer to a pure DC voltage, and the RMS diode current will be higher. RMS Diode Current is denoted by I_d(rms) symbol.

How to evaluate RMS Diode Current of Three Phase Uncontrolled Rectifier using this online evaluator? To use this online evaluator for RMS Diode Current of Three Phase Uncontrolled Rectifier, enter Winding Ratio (n), Peak Input Voltage (V_max) & Load Resistance (R_L) and hit the calculate button.

FAQs on RMS Diode Current of Three Phase Uncontrolled Rectifier

What is the formula to find RMS Diode Current of Three Phase Uncontrolled Rectifier?

The formula of RMS Diode Current of Three Phase Uncontrolled Rectifier is expressed as RMS Diode Current = (Winding Ratio*Peak Input Voltage)/(Load Resistance*sqrt(2))*sqrt(1/3+sqrt(3)/(4*pi)). Here is an example- 229.144 = (15*220)/(6.99*sqrt(2))*sqrt(1/3+sqrt(3)/(4*pi)).

How to calculate RMS Diode Current of Three Phase Uncontrolled Rectifier?

With Winding Ratio (n), Peak Input Voltage (V_max) & Load Resistance (R_L) we can find RMS Diode Current of Three Phase Uncontrolled Rectifier using the formula - RMS Diode Current = (Winding Ratio*Peak Input Voltage)/(Load Resistance*sqrt(2))*sqrt(1/3+sqrt(3)/(4*pi)). This formula also uses Archimedes' constant and Square Root (sqrt) function(s).

Can the RMS Diode Current of Three Phase Uncontrolled Rectifier be negative?

No, the RMS Diode Current of Three Phase Uncontrolled Rectifier, measured in Electric Current cannot be negative.

Which unit is used to measure RMS Diode Current of Three Phase Uncontrolled Rectifier?

RMS Diode Current of Three Phase Uncontrolled Rectifier is usually measured using the Ampere[A] for Electric Current. Milliampere[A], Microampere[A], Centiampere[A] are the few other units in which RMS Diode Current of Three Phase Uncontrolled Rectifier can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

RMS Diode Current of Three Phase Uncontrolled Rectifier Formula

RMS Diode Current of Three Phase Uncontrolled Rectifier Example

RMS Diode Current of Three Phase Uncontrolled Rectifier Solution

RMS Diode Current of Three Phase Uncontrolled Rectifier Formula Elements

Other formulas in Full Wave category

How to Evaluate RMS Diode Current of Three Phase Uncontrolled Rectifier?

FAQs on RMS Diode Current of Three Phase Uncontrolled Rectifier

Variable Name