FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Responsivity of Detector Formula

Fx Copy

LaTeX Copy

Detector Responsivity is defined as measures of the input-output gain of a detector system. Check FAQs

R d = \frac{V rms}{P rms}

R_d - Detector Responsivity?V_rms - Root Mean Square Voltage Output?P_rms - Root Mean Square Incident Power of Detector?

Responsivity of Detector Example

With values

With units

Only example

Here is how the Responsivity of Detector equation looks like with Values.

Here is how the Responsivity of Detector equation looks like with Units.

Here is how the Responsivity of Detector equation looks like.

15.1111 = \frac{81.6}{5.4}

15.1111A/W = \frac{81.6V}{5.4W}

15.1111 = \frac{81.6}{5.4}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electronics and Instrumentation » Category

Transducers » fx Responsivity of Detector

Responsivity of Detector Solution

Follow our step by step solution on how to calculate Responsivity of Detector?

FIRST Step Consider the formula

R d = \frac{V rms}{P rms}

Next Step Substitute values of Variables

∴

R d = \frac{81.6V}{5.4W}

Next Step Prepare to Evaluate

∴

R d = \frac{81.6}{5.4}

Next Step Evaluate

∴

R d = 15.1111111111111A/W

LAST Step Rounding Answer

∴

R d = 15.1111A/W

Responsivity of Detector Formula Elements

Variables

Detector Responsivity

Detector Responsivity is defined as measures of the input-output gain of a detector system.

Symbol: R_d

Measurement: ResponsivityUnit: A/W

Note: Value should be greater than 0.

Formulas to find Detector Responsivity

Root Mean Square Voltage Output

Root Mean Square Voltage Output is the measure of transducer average voltage output. It provides a standardized representation of the transducer's signal strength.

Symbol: V_rms

Measurement: Electric PotentialUnit: V

Note: Value should be greater than 0.

Formulas to find Root Mean Square Voltage Output

Root Mean Square Incident Power of Detector

Root Mean Square Incident Power of Detector refers to the power of the incoming signal or radiation incident on the detector surface.

Symbol: P_rms

Measurement: PowerUnit: W

Note: Value should be greater than 0.

Formulas to find Root Mean Square Incident Power of Detector

Other formulas in Transducers category

Go Sensitivity of Photoresistive Transducer

ΔS = \frac{ΔR}{ΔH}

Go Change in Resistance

ΔR = ΔH \cdot ΔS

Go Current Generator Capacitance

C g = C t + C amp + C cable

Go Capacitance of Transducer

C t = C g - (C amp + C cable)

How to Evaluate Responsivity of Detector?

Responsivity of Detector evaluator uses Detector Responsivity = Root Mean Square Voltage Output/Root Mean Square Incident Power of Detector to evaluate the Detector Responsivity, The Responsivity of Detector formula is defined as measures of the input-output gain of a detector system. In the specific case of a photodetector, responsivity measures the electrical output per optical input the wavelength of the optical signal and has units of amperes per watt (A/W). Detector Responsivity is denoted by R_d symbol.

How to evaluate Responsivity of Detector using this online evaluator? To use this online evaluator for Responsivity of Detector, enter Root Mean Square Voltage Output (V_rms) & Root Mean Square Incident Power of Detector (P_rms) and hit the calculate button.

FAQs on Responsivity of Detector

What is the formula to find Responsivity of Detector?

The formula of Responsivity of Detector is expressed as Detector Responsivity = Root Mean Square Voltage Output/Root Mean Square Incident Power of Detector. Here is an example- 0.690741 = 81.6/5.4.

How to calculate Responsivity of Detector?

With Root Mean Square Voltage Output (V_rms) & Root Mean Square Incident Power of Detector (P_rms) we can find Responsivity of Detector using the formula - Detector Responsivity = Root Mean Square Voltage Output/Root Mean Square Incident Power of Detector.

Can the Responsivity of Detector be negative?

No, the Responsivity of Detector, measured in Responsivity cannot be negative.

Which unit is used to measure Responsivity of Detector?

Responsivity of Detector is usually measured using the Ampere per Watt[A/W] for Responsivity. are the few other units in which Responsivity of Detector can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Responsivity of Detector Formula

Responsivity of Detector Example

Responsivity of Detector Solution

Responsivity of Detector Formula Elements

Other formulas in Transducers category

How to Evaluate Responsivity of Detector?

FAQs on Responsivity of Detector

Variable Name