FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Required Thickness for Jacket Closer Member with Jacket Width Formula

Fx Copy

LaTeX Copy

Required Thickness for Jacket Closer Member will be determined by the maximum allowable stress in the material, the design pressure and temperature. Check FAQs

t rc = 0.886 \cdot w j \cdot \sqrt{\frac{p j}{f j}}

t_rc - Required Thickness for Jacket Closer Member?w_j - Jacket Width?p_j - Design Jacket Pressure?f_j - Allowable Stress for Jacket Material?

Required Thickness for Jacket Closer Member with Jacket Width Example

With values

With units

Only example

Here is how the Required Thickness for Jacket Closer Member with Jacket Width equation looks like with Values.

Here is how the Required Thickness for Jacket Closer Member with Jacket Width equation looks like with Units.

Here is how the Required Thickness for Jacket Closer Member with Jacket Width equation looks like.

1.3104 = 0.886 \cdot 50 \cdot \sqrt{\frac{0.105}{120}}

1.3104mm = 0.886 \cdot 50mm \cdot \sqrt{\frac{0.105N/mm²}{120N/mm²}}

1.3104 = 0.886 \cdot 50 \cdot \sqrt{\frac{0.105}{120}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Process Equipment Design » fx Required Thickness for Jacket Closer Member with Jacket Width

Required Thickness for Jacket Closer Member with Jacket Width Solution

Follow our step by step solution on how to calculate Required Thickness for Jacket Closer Member with Jacket Width?

FIRST Step Consider the formula

t rc = 0.886 \cdot w j \cdot \sqrt{\frac{p j}{f j}}

Next Step Substitute values of Variables

∴

t rc = 0.886 \cdot 50mm \cdot \sqrt{\frac{0.105N/mm²}{120N/mm²}}

Next Step Prepare to Evaluate

∴

t rc = 0.886 \cdot 50 \cdot \sqrt{\frac{0.105}{120}}

Next Step Evaluate

∴

t rc = 0.00131041167195656m

Next Step Convert to Output's Unit

∴

t rc = 1.31041167195656mm

LAST Step Rounding Answer

∴

t rc = 1.3104mm

Required Thickness for Jacket Closer Member with Jacket Width Formula Elements

Variables

Functions

Required Thickness for Jacket Closer Member

Required Thickness for Jacket Closer Member will be determined by the maximum allowable stress in the material, the design pressure and temperature.

Symbol: t_rc

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Required Thickness for Jacket Closer Member

Jacket Width

Jacket Width is the measurement or extent of something from side to side.

Symbol: w_j

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Jacket Width

Design Jacket Pressure

Design Jacket Pressure refers to a type of pressure vessel designed to withstand high pressures and temperatures, typically used for containing gases or liquids under extreme conditions.

Symbol: p_j

Measurement: PressureUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Design Jacket Pressure

Allowable Stress for Jacket Material

Allowable Stress for Jacket Material at Design Temperature is defined as the material failure stress divided by a factor of safety greater than one.

Symbol: f_j

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Allowable Stress for Jacket Material

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Jacketed Reaction Vessel category

Go Jacket Width

w j = \frac{D ij - OD Vessel}{2}

Go Required Plate Thickness for Dimple Jacket

t j (minimum) = Maximum Pitch \cdot \sqrt{\frac{p j}{3 \cdot f j}}

Go Maximum Hoop Stress in Coil at Junction with Shell

f cc = \frac{p j \cdot d i}{2 \cdot t coil \cdot J coil}

Go Maximum Axial Stress in Coil at Junction with Shell

f ac = \frac{p j \cdot d i}{(4 \cdot t coil \cdot J coil) + (2.5 \cdot t \cdot J)}

How to Evaluate Required Thickness for Jacket Closer Member with Jacket Width?

Required Thickness for Jacket Closer Member with Jacket Width evaluator uses Required Thickness for Jacket Closer Member = 0.886*Jacket Width*sqrt(Design Jacket Pressure/Allowable Stress for Jacket Material) to evaluate the Required Thickness for Jacket Closer Member, The Required Thickness for Jacket Closer Member with Jacket Width formula is defined minimum thickness without corrosion allowance for each element of a pressure vessel based on the appropriate design code calculations and code allowable stress that consider pressure, mechanical, and structural loadings. Required Thickness for Jacket Closer Member is denoted by t_rc symbol.

How to evaluate Required Thickness for Jacket Closer Member with Jacket Width using this online evaluator? To use this online evaluator for Required Thickness for Jacket Closer Member with Jacket Width, enter Jacket Width (w_j), Design Jacket Pressure (p_j) & Allowable Stress for Jacket Material (f_j) and hit the calculate button.

FAQs on Required Thickness for Jacket Closer Member with Jacket Width

What is the formula to find Required Thickness for Jacket Closer Member with Jacket Width?

The formula of Required Thickness for Jacket Closer Member with Jacket Width is expressed as Required Thickness for Jacket Closer Member = 0.886*Jacket Width*sqrt(Design Jacket Pressure/Allowable Stress for Jacket Material). Here is an example- 1310.412 = 0.886*0.05*sqrt(105000/120000000).

How to calculate Required Thickness for Jacket Closer Member with Jacket Width?

With Jacket Width (w_j), Design Jacket Pressure (p_j) & Allowable Stress for Jacket Material (f_j) we can find Required Thickness for Jacket Closer Member with Jacket Width using the formula - Required Thickness for Jacket Closer Member = 0.886*Jacket Width*sqrt(Design Jacket Pressure/Allowable Stress for Jacket Material). This formula also uses Square Root (sqrt) function(s).

Can the Required Thickness for Jacket Closer Member with Jacket Width be negative?

No, the Required Thickness for Jacket Closer Member with Jacket Width, measured in Length cannot be negative.

Which unit is used to measure Required Thickness for Jacket Closer Member with Jacket Width?

Required Thickness for Jacket Closer Member with Jacket Width is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Required Thickness for Jacket Closer Member with Jacket Width can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Required Thickness for Jacket Closer Member with Jacket Width Formula

Required Thickness for Jacket Closer Member with Jacket Width Example

Required Thickness for Jacket Closer Member with Jacket Width Solution

Required Thickness for Jacket Closer Member with Jacket Width Formula Elements

Other formulas in Jacketed Reaction Vessel category

How to Evaluate Required Thickness for Jacket Closer Member with Jacket Width?

FAQs on Required Thickness for Jacket Closer Member with Jacket Width

Variable Name