FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Reference tool life given distance moved by tool corner Formula

Fx Copy

LaTeX Copy

Reference Tool Life is the tool life of the tool obtained in the reference to machining condition. Check FAQs

T ref = \frac{T}{{(V c \cdot \frac{t m}{K})}^{\frac{1}{z}}}

T_ref - Reference Tool Life?T - Tool Life?V_c - Cutting Speed?t_m - Machining Time?K - Constant For Machining Condition?z - Taylors Tool Life Exponent in Tool Life?

Reference tool life given distance moved by tool corner Example

With values

With units

Only example

Here is how the Reference tool life given distance moved by tool corner equation looks like with Values.

Here is how the Reference tool life given distance moved by tool corner equation looks like with Units.

Here is how the Reference tool life given distance moved by tool corner equation looks like.

60.0003 = \frac{52.08}{{(0.49 \cdot \frac{373}{186.0331})}^{\frac{1}{0.125}}}

60.0003s = \frac{52.08s}{{(0.49m/s \cdot \frac{373s}{186.0331m})}^{\frac{1}{0.125}}}

60.0003 = \frac{52.08}{{(0.49 \cdot \frac{373}{186.0331})}^{\frac{1}{0.125}}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Reference tool life given distance moved by tool corner

Reference tool life given distance moved by tool corner Solution

Follow our step by step solution on how to calculate Reference tool life given distance moved by tool corner?

FIRST Step Consider the formula

T ref = \frac{T}{{(V c \cdot \frac{t m}{K})}^{\frac{1}{z}}}

Next Step Substitute values of Variables

∴

T ref = \frac{52.08s}{{(0.49m/s \cdot \frac{373s}{186.0331m})}^{\frac{1}{0.125}}}

Next Step Prepare to Evaluate

∴

T ref = \frac{52.08}{{(0.49 \cdot \frac{373}{186.0331})}^{\frac{1}{0.125}}}

Next Step Evaluate

∴

T ref = 60.0003060312161s

LAST Step Rounding Answer

∴

T ref = 60.0003s

Reference tool life given distance moved by tool corner Formula Elements

Variables

Reference Tool Life

Reference Tool Life is the tool life of the tool obtained in the reference to machining condition.

Symbol: T_ref

Measurement: TimeUnit: s

Note: Value should be greater than 0.

Formulas to find Reference Tool Life

Tool Life

Tool Life is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.

Symbol: T

Measurement: TimeUnit: s

Note: Value should be greater than 0.

Formulas to find Tool Life

Cutting Speed

Cutting Speed is defined as the speed at which the work moves with respect to the tool (usually measured in feet per minute).

Symbol: V_c

Measurement: SpeedUnit: m/s

Note: Value should be greater than 0.

Formulas to find Cutting Speed

Machining Time

Machining Time is the time when a machine is actually processing something. Generally, machining time is the term used when there is a removal of unwanted material.

Symbol: t_m

Measurement: TimeUnit: s

Note: Value should be greater than 0.

Formulas to find Machining Time

Constant For Machining Condition

Constant For Machining Condition can be regarded as the distance moved by the tool corner relative to the workpiece during a particular machining condition.

Symbol: K

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Constant For Machining Condition

Taylors Tool Life Exponent in Tool Life

Taylors Tool Life Exponent in Tool Life is an experimental exponent that helps in quantifying the rate of tool wear.

Symbol: z

Measurement: NAUnit: Unitless

Note: Value should be between 0 to 1.

Formulas to find Taylors Tool Life Exponent in Tool Life

Other formulas in Tool Life category

Go Volume of Metal removed given Cutting Velocity and Tool Life

vol = TL \cdot V \cdot f \cdot d' cut

Go Feed given Cutting Velocity, Tool Life, and Volume of Metal Removed

f = \frac{vol}{TL \cdot V \cdot d' cut}

Go Depth of Cut given Cutting Velocity, Tool Life, and Volume of Metal Removed

d' cut = \frac{vol}{TL \cdot f \cdot V}

Go Tool temperature

θ = \frac{C 0 \cdot U s \cdot V^{0.44} \cdot A^{0.22}}{k^{0.44} \cdot c^{0.56}}

How to Evaluate Reference tool life given distance moved by tool corner?

Reference tool life given distance moved by tool corner evaluator uses Reference Tool Life = Tool Life/((Cutting Speed*Machining Time/Constant For Machining Condition)^(1/Taylors Tool Life Exponent in Tool Life)) to evaluate the Reference Tool Life, The Reference tool life given distance moved by tool corner is the Tool Life of the tool obtained in the reference Machining Condition. Reference Tool Life is denoted by T_ref symbol.

How to evaluate Reference tool life given distance moved by tool corner using this online evaluator? To use this online evaluator for Reference tool life given distance moved by tool corner, enter Tool Life (T), Cutting Speed (V_c), Machining Time (t_m), Constant For Machining Condition (K) & Taylors Tool Life Exponent in Tool Life (z) and hit the calculate button.

FAQs on Reference tool life given distance moved by tool corner

What is the formula to find Reference tool life given distance moved by tool corner?

The formula of Reference tool life given distance moved by tool corner is expressed as Reference Tool Life = Tool Life/((Cutting Speed*Machining Time/Constant For Machining Condition)^(1/Taylors Tool Life Exponent in Tool Life)). Here is an example- 60.00031 = 52.08/((0.49*373/186.0331)^(1/0.125)).

How to calculate Reference tool life given distance moved by tool corner?

With Tool Life (T), Cutting Speed (V_c), Machining Time (t_m), Constant For Machining Condition (K) & Taylors Tool Life Exponent in Tool Life (z) we can find Reference tool life given distance moved by tool corner using the formula - Reference Tool Life = Tool Life/((Cutting Speed*Machining Time/Constant For Machining Condition)^(1/Taylors Tool Life Exponent in Tool Life)).

Can the Reference tool life given distance moved by tool corner be negative?

No, the Reference tool life given distance moved by tool corner, measured in Time cannot be negative.

Which unit is used to measure Reference tool life given distance moved by tool corner?

Reference tool life given distance moved by tool corner is usually measured using the Second[s] for Time. Millisecond[s], Microsecond[s], Nanosecond[s] are the few other units in which Reference tool life given distance moved by tool corner can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Reference tool life given distance moved by tool corner Formula

Reference tool life given distance moved by tool corner Example

Reference tool life given distance moved by tool corner Solution

Reference tool life given distance moved by tool corner Formula Elements

Other formulas in Tool Life category

How to Evaluate Reference tool life given distance moved by tool corner?

FAQs on Reference tool life given distance moved by tool corner

Variable Name