FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Receiver Sensitivity Formula

Fx Copy

LaTeX Copy

Receiver Sensitivity is the measure of receiver performance. Check FAQs

S r = RNF + SNR

S_r - Receiver Sensitivity?RNF - Receiver Noise Floor?SNR - Signal Noise Ratio?

Receiver Sensitivity Example

With values

With units

Only example

Here is how the Receiver Sensitivity equation looks like with Values.

Here is how the Receiver Sensitivity equation looks like with Units.

Here is how the Receiver Sensitivity equation looks like.

6.458 = 6.1 + 0.358

6.458dB = 6.1dB + 0.358

6.458 = 6.1 + 0.358

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electronics » Category

Microwave Theory » fx Receiver Sensitivity

Receiver Sensitivity Solution

Follow our step by step solution on how to calculate Receiver Sensitivity?

FIRST Step Consider the formula

S r = RNF + SNR

Next Step Substitute values of Variables

∴

S r = 6.1dB + 0.358

Next Step Prepare to Evaluate

∴

S r = 6.1 + 0.358

LAST Step Evaluate

∴

S r = 6.458dB

Receiver Sensitivity Formula Elements

Variables

Receiver Sensitivity

Receiver Sensitivity is the measure of receiver performance.

Symbol: S_r

Measurement: NoiseUnit: dB

Note: Value should be greater than 0.

Formulas to find Receiver Sensitivity

Receiver Noise Floor

Receiver Noise Floor is the level of noise power that appears at the receiver input when there is no signal present. It is usually expressed in units of power per unit bandwidth, such as dB.

Symbol: RNF

Measurement: NoiseUnit: dB

Note: Value should be greater than 0.

Formulas to find Receiver Noise Floor

Signal Noise Ratio

Signal Noise Ratio is the ratio of the signal power to the noise power in a given system or circuit and is a measure of the overall signal quality.

Symbol: SNR

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Signal Noise Ratio

Other formulas in Magnetron Oscillator category

Go Repetition Frequency of Pulse

f r = \frac{f sl - f c}{N s}

Go Characteristic Admittance

Y = \frac{1}{Z o}

Go RF Pulse Width

T eff = \frac{1}{2 \cdot BW}

Go Cyclotron Angular Frequency

ω c = B Z \cdot (\frac{[Charge-e]}{[Mass-e]})

How to Evaluate Receiver Sensitivity?

Receiver Sensitivity evaluator uses Receiver Sensitivity = Receiver Noise Floor+Signal Noise Ratio to evaluate the Receiver Sensitivity, The Receiver Sensitivity formula is a measure of the degradation of the signal-to-noise ratio (SNR) of a system caused by the noise added by the receiver itself. Receiver Sensitivity is denoted by S_r symbol.

How to evaluate Receiver Sensitivity using this online evaluator? To use this online evaluator for Receiver Sensitivity, enter Receiver Noise Floor (RNF) & Signal Noise Ratio (SNR) and hit the calculate button.

FAQs on Receiver Sensitivity

What is the formula to find Receiver Sensitivity?

The formula of Receiver Sensitivity is expressed as Receiver Sensitivity = Receiver Noise Floor+Signal Noise Ratio. Here is an example- 6.458 = 6.1+0.358.

How to calculate Receiver Sensitivity?

With Receiver Noise Floor (RNF) & Signal Noise Ratio (SNR) we can find Receiver Sensitivity using the formula - Receiver Sensitivity = Receiver Noise Floor+Signal Noise Ratio.

Can the Receiver Sensitivity be negative?

No, the Receiver Sensitivity, measured in Noise cannot be negative.

Which unit is used to measure Receiver Sensitivity?

Receiver Sensitivity is usually measured using the Decibel[dB] for Noise. Neper[dB], MilliDecibel[dB] are the few other units in which Receiver Sensitivity can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Receiver Sensitivity Formula

Receiver Sensitivity Example

Receiver Sensitivity Solution

Receiver Sensitivity Formula Elements

Other formulas in Magnetron Oscillator category

How to Evaluate Receiver Sensitivity?

FAQs on Receiver Sensitivity

Variable Name