FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Ratio of Pay to Loose using Compaction Production by Compaction Equipment Formula

Fx Copy

LaTeX Copy

Pay Ratio is the ratio between the effective stress and the total stress in soil mechanics. Check FAQs

PR = \frac{y \cdot P}{16 \cdot W \cdot S \cdot L \cdot E}

PR - Pay Ratio?y - Production due to Compaction?P - Number of Passes?W - Width of Roller?S - Roller Speed?L - Lift Thickness?E - Efficiency Factor?

Ratio of Pay to Loose using Compaction Production by Compaction Equipment Example

With values

With units

Only example

Here is how the Ratio of Pay to Loose using Compaction Production by Compaction Equipment equation looks like with Values.

Here is how the Ratio of Pay to Loose using Compaction Production by Compaction Equipment equation looks like with Units.

Here is how the Ratio of Pay to Loose using Compaction Production by Compaction Equipment equation looks like.

2.9899 = \frac{297.59 \cdot 5}{16 \cdot 2.89 \cdot 3 \cdot 7.175 \cdot 0.5}

2.9899m³ = \frac{297.59m³/hr \cdot 5}{16 \cdot 2.89m \cdot 3km/h \cdot 7.175mm \cdot 0.5}

2.9899 = \frac{297.59 \cdot 5}{16 \cdot 2.89 \cdot 3 \cdot 7.175 \cdot 0.5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Geotechnical Engineering » fx Ratio of Pay to Loose using Compaction Production by Compaction Equipment

Ratio of Pay to Loose using Compaction Production by Compaction Equipment Solution

Follow our step by step solution on how to calculate Ratio of Pay to Loose using Compaction Production by Compaction Equipment?

FIRST Step Consider the formula

PR = \frac{y \cdot P}{16 \cdot W \cdot S \cdot L \cdot E}

Next Step Substitute values of Variables

∴

PR = \frac{297.59m³/hr \cdot 5}{16 \cdot 2.89m \cdot 3km/h \cdot 7.175mm \cdot 0.5}

Next Step Convert Units

∴

PR = \frac{0.0827m³/s \cdot 5}{16 \cdot 2.89m \cdot 0.8333m/s \cdot 0.0072m \cdot 0.5}

Next Step Prepare to Evaluate

∴

PR = \frac{0.0827 \cdot 5}{16 \cdot 2.89 \cdot 0.8333 \cdot 0.0072 \cdot 0.5}

Next Step Evaluate

∴

PR = 2.98990471367887m³

LAST Step Rounding Answer

∴

PR = 2.9899m³

Ratio of Pay to Loose using Compaction Production by Compaction Equipment Formula Elements

Variables

Pay Ratio

Pay Ratio is the ratio between the effective stress and the total stress in soil mechanics.

Symbol: PR

Measurement: VolumeUnit: m³

Note: Value should be greater than 0.

Formulas to find Pay Ratio

Production due to Compaction

Production due to Compaction is the exertion of force on something so that it becomes denser.

Symbol: y

Measurement: Volumetric Flow RateUnit: m³/hr

Note: Value should be greater than 0.

Formulas to find Production due to Compaction

Number of Passes

Number of Passes is the number of times a compactor (such as a vibratory roller or a plate compactor) passes over a specific area of soil or aggregate during compaction.

Symbol: P

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Number of Passes

Width of Roller

Width of Roller is the physical width of the roller used in compaction processes, such as those employed in soil and pavement construction.

Symbol: W

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Width of Roller

Roller Speed

Roller Speed is the velocity at which a compaction roller moves over soil or other materials during the compaction process.

Symbol: S

Measurement: SpeedUnit: km/h

Note: Value should be greater than 0.

Formulas to find Roller Speed

Lift Thickness

Lift Thickness is the depth of a compacted layer of fill material placed during construction. This term is important in the compaction process, where fill material is often placed in layers.

Symbol: L

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Lift Thickness

Efficiency Factor

The Efficiency Factor is a dimensionless parameter used to relate the strength or stiffness of improved soil (after treatment) to its original, untreated state.

Symbol: E

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Efficiency Factor

Other formulas in Compaction Equipment category

Go Compaction Production by Compaction Equipment

y = \frac{16 \cdot W \cdot S \cdot L \cdot E \cdot PR}{P}

Go Width of Roller given Compaction Production by Compaction Equipment

W = \frac{y \cdot P}{16 \cdot S \cdot L \cdot PR \cdot E}

How to Evaluate Ratio of Pay to Loose using Compaction Production by Compaction Equipment?

Ratio of Pay to Loose using Compaction Production by Compaction Equipment evaluator uses Pay Ratio = (Production due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Lift Thickness*Efficiency Factor) to evaluate the Pay Ratio, The Ratio of Pay to Loose using Compaction Production by Compaction Equipment formula is defined as a measure used to quantify the volume change of soil or aggregate materials from their loose state (uncompacted) to their compacted state. This ratio is important in determining the amount of material required and the expected final volume after compaction. Pay Ratio is denoted by PR symbol.

How to evaluate Ratio of Pay to Loose using Compaction Production by Compaction Equipment using this online evaluator? To use this online evaluator for Ratio of Pay to Loose using Compaction Production by Compaction Equipment, enter Production due to Compaction (y), Number of Passes (P), Width of Roller (W), Roller Speed (S), Lift Thickness (L) & Efficiency Factor (E) and hit the calculate button.

FAQs on Ratio of Pay to Loose using Compaction Production by Compaction Equipment

What is the formula to find Ratio of Pay to Loose using Compaction Production by Compaction Equipment?

The formula of Ratio of Pay to Loose using Compaction Production by Compaction Equipment is expressed as Pay Ratio = (Production due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Lift Thickness*Efficiency Factor). Here is an example- 2.809058 = (0.0826638888888889*5)/(16*2.89*0.833333333333333*0.007175*0.5).

How to calculate Ratio of Pay to Loose using Compaction Production by Compaction Equipment?

With Production due to Compaction (y), Number of Passes (P), Width of Roller (W), Roller Speed (S), Lift Thickness (L) & Efficiency Factor (E) we can find Ratio of Pay to Loose using Compaction Production by Compaction Equipment using the formula - Pay Ratio = (Production due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Lift Thickness*Efficiency Factor).

Can the Ratio of Pay to Loose using Compaction Production by Compaction Equipment be negative?

No, the Ratio of Pay to Loose using Compaction Production by Compaction Equipment, measured in Volume cannot be negative.

Which unit is used to measure Ratio of Pay to Loose using Compaction Production by Compaction Equipment?

Ratio of Pay to Loose using Compaction Production by Compaction Equipment is usually measured using the Cubic Meter[m³] for Volume. Cubic Centimeter[m³], Cubic Millimeter[m³], Liter[m³] are the few other units in which Ratio of Pay to Loose using Compaction Production by Compaction Equipment can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Ratio of Pay to Loose using Compaction Production by Compaction Equipment Formula

Ratio of Pay to Loose using Compaction Production by Compaction Equipment Example

Ratio of Pay to Loose using Compaction Production by Compaction Equipment Solution

Ratio of Pay to Loose using Compaction Production by Compaction Equipment Formula Elements

Other formulas in Compaction Equipment category

How to Evaluate Ratio of Pay to Loose using Compaction Production by Compaction Equipment?

FAQs on Ratio of Pay to Loose using Compaction Production by Compaction Equipment

Variable Name