FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids Formula

GoRate Constant based on Weight of Catalyst in Batch Solids and Batch Fluids Formula

GoRate Constant based on Weight of Catalyst in Batch Solids and Mixed Constant Flow of Fluids Formula

Fx Copy

LaTeX Copy

The Rate Constant based on Weight of Catalyst is a specific form of expressing the rate constant in a catalytic reaction with respect to the mass of the catalyst. Check FAQs

k' = \frac{C A0 - C A}{C A \cdot \exp (\ln (𝛕 ') - k d,MF \cdot t)}

k' - Rate Constant based on Weight of Catalyst?C_A0 - Initial Conc. for 1st Order Catalyzed Reactions?C_A - Reactant Concentration?𝛕 ' - Space Time for 1st Order Catalyzed Reactions?k_d,MF - Rate of Deactivation for Mixed Flow?t - Time Interval?

Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids Example

With values

With units

Only example

Here is how the Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids equation looks like with Values.

Here is how the Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids equation looks like with Units.

Here is how the Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids equation looks like.

0.9908 = \frac{80 - 24.1}{24.1 \cdot \exp (\ln (2.72) - 0.05 \cdot 3)}

0.9908s⁻¹ = \frac{80mol/m³ - 24.1mol/m³}{24.1mol/m³ \cdot \exp (\ln (2.72s) - 0.05s⁻¹ \cdot 3s)}

0.9908 = \frac{80 - 24.1}{24.1 \cdot \exp (\ln (2.72) - 0.05 \cdot 3)}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Chemical Reaction Engineering » fx Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids

Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids Solution

Follow our step by step solution on how to calculate Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids?

FIRST Step Consider the formula

k' = \frac{C A0 - C A}{C A \cdot \exp (\ln (𝛕 ') - k d,MF \cdot t)}

Next Step Substitute values of Variables

∴

k' = \frac{80mol/m³ - 24.1mol/m³}{24.1mol/m³ \cdot \exp (\ln (2.72s) - 0.05s⁻¹ \cdot 3s)}

Next Step Prepare to Evaluate

∴

k' = \frac{80 - 24.1}{24.1 \cdot \exp (\ln (2.72) - 0.05 \cdot 3)}

Next Step Evaluate

∴

k' = 0.990763579578213s⁻¹

LAST Step Rounding Answer

∴

k' = 0.9908s⁻¹

Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids Formula Elements

Variables

Functions

Rate Constant based on Weight of Catalyst

The Rate Constant based on Weight of Catalyst is a specific form of expressing the rate constant in a catalytic reaction with respect to the mass of the catalyst.

Symbol: k'

Measurement: First Order Reaction Rate ConstantUnit: s⁻¹

Note: Value should be greater than 0.

Formulas to find Rate Constant based on Weight of Catalyst

Initial Conc. for 1st Order Catalyzed Reactions

Initial Conc. for 1st Order Catalyzed Reactions is the first measured Concentration of a Compound in a Substance.

Symbol: C_A0

Measurement: Molar ConcentrationUnit: mol/m³

Note: Value should be greater than 0.

Formulas to find Initial Conc. for 1st Order Catalyzed Reactions

Reactant Concentration

Reactant concentration is a measure of the quantity of a specific reactant in relation to the total volume or mass of the system in which a chemical reaction is taking place.

Symbol: C_A

Measurement: Molar ConcentrationUnit: mol/m³

Note: Value should be greater than 0.

Formulas to find Reactant Concentration

Space Time for 1st Order Catalyzed Reactions

Space Time for 1st Order Catalyzed Reactions is a parameter used to quantify the time required for a given volume of reactant to pass through a catalytic reactor.

Symbol: 𝛕 '

Measurement: TimeUnit: s

Note: Value should be greater than 0.

Formulas to find Space Time for 1st Order Catalyzed Reactions

Rate of Deactivation for Mixed Flow

Rate of Deactivation for Mixed Flow refers to the speed or rate at which the activity of a catalyst decreases over time in a chemical reaction, in a Mixed Flow Reactor.

Symbol: k_d,MF

Measurement: First Order Reaction Rate ConstantUnit: s⁻¹

Note: Value should be greater than 0.

Formulas to find Rate of Deactivation for Mixed Flow

Time Interval

A Time Interval is the amount of time required for the change from initial to the final state.

Symbol: t

Measurement: TimeUnit: s

Note: Value should be greater than 0.

Formulas to find Time Interval

The natural logarithm, also known as the logarithm to the base e, is the inverse function of the natural exponential function.

Syntax: ln(Number)

exp

n an exponential function, the value of the function changes by a constant factor for every unit change in the independent variable.

Syntax: exp(Number)

Other Formulas to find Rate Constant based on Weight of Catalyst

Go Rate Constant based on Weight of Catalyst in Batch Solids and Batch Fluids

k' = (\frac{V \cdot k d}{W d}) \cdot \exp (\ln (\ln (\frac{C A}{C A∞})) + k d \cdot t)

Go Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Constant Flow of Fluids

k' = \frac{\exp (\ln ((\frac{C A0}{C A}) - 1) + k d,MF \cdot t)}{𝛕 '}

Go Rate Constant based on Weight of Catalyst in Batch Solids and Plug Constant Flow of Fluids

k' = \frac{\exp (\ln (\ln (\frac{C A0}{C A})) + k d,PF \cdot t)}{𝛕 '}

Go Rate Constant based on Weight of Catalyst in Batch Solids and Plug Changing Flow of Fluids

k' = \ln (\frac{C A0}{C A}) \cdot (\frac{1}{\exp ((\ln (𝛕 ') - k d,PF \cdot t))})

Other formulas in Deactivating Catalysts category

Go Activity of Catalyst

a = - \frac{r' A}{- (r' A0)}

Go Weight of Catalyst in Batch Solids and Batch Fluids

W d = (\frac{V \cdot k d}{k'}) \cdot \exp (\ln (\ln (\frac{C A}{C A∞})) + k d \cdot t)

Go Deactivation Rate in Batch Solids and Mixed Constant Flow of Fluids

k d,MF = \frac{\ln (k' \cdot 𝛕 ') - \ln ((\frac{C A0}{C A}) - 1)}{t}

Go Deactivation rate for Batch Solids and Mixed Changing Flow of Fluids

k d,MF = \frac{\ln (𝛕 ') - \ln (\frac{C A0 - C A}{k' \cdot C A})}{t}

How to Evaluate Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids?

Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids evaluator uses Rate Constant based on Weight of Catalyst = (Initial Conc. for 1st Order Catalyzed Reactions-Reactant Concentration)/(Reactant Concentration*exp(ln(Space Time for 1st Order Catalyzed Reactions)-Rate of Deactivation for Mixed Flow*Time Interval)) to evaluate the Rate Constant based on Weight of Catalyst, The Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids formula is defined as Rate Constant Calculated when the Batch Solids and Mixed Flow of Fluids are Considered in the Reactors, at Deactivation of Catalyst. Rate Constant based on Weight of Catalyst is denoted by k' symbol.

How to evaluate Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids using this online evaluator? To use this online evaluator for Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids, enter Initial Conc. for 1st Order Catalyzed Reactions (C_A0), Reactant Concentration (C_A), Space Time for 1st Order Catalyzed Reactions (𝛕 '), Rate of Deactivation for Mixed Flow (k_d,MF) & Time Interval (t) and hit the calculate button.

FAQs on Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids

What is the formula to find Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids?

The formula of Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids is expressed as Rate Constant based on Weight of Catalyst = (Initial Conc. for 1st Order Catalyzed Reactions-Reactant Concentration)/(Reactant Concentration*exp(ln(Space Time for 1st Order Catalyzed Reactions)-Rate of Deactivation for Mixed Flow*Time Interval)). Here is an example- 0.990764 = (80-24.1)/(24.1*exp(ln(2.72)-0.05*3)).

How to calculate Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids?

With Initial Conc. for 1st Order Catalyzed Reactions (C_A0), Reactant Concentration (C_A), Space Time for 1st Order Catalyzed Reactions (𝛕 '), Rate of Deactivation for Mixed Flow (k_d,MF) & Time Interval (t) we can find Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids using the formula - Rate Constant based on Weight of Catalyst = (Initial Conc. for 1st Order Catalyzed Reactions-Reactant Concentration)/(Reactant Concentration*exp(ln(Space Time for 1st Order Catalyzed Reactions)-Rate of Deactivation for Mixed Flow*Time Interval)). This formula also uses Natural Logarithm (ln), Exponential Growth (exp) function(s).

What are the other ways to Calculate Rate Constant based on Weight of Catalyst?

Here are the different ways to Calculate Rate Constant based on Weight of Catalyst-

Rate Constant based on Weight of Catalyst=((Volume of Reactor*Rate of Deactivation)/Weight of Catalyst in Deactivation of Catalyst)*exp(ln(ln(Reactant Concentration/Concentration at Infinite Time))+Rate of Deactivation*Time Interval)
Rate Constant based on Weight of Catalyst=exp(ln((Initial Conc. for 1st Order Catalyzed Reactions/Reactant Concentration)-1)+Rate of Deactivation for Mixed Flow*Time Interval)/Space Time for 1st Order Catalyzed Reactions
Rate Constant based on Weight of Catalyst=exp(ln(ln(Initial Conc. for 1st Order Catalyzed Reactions/Reactant Concentration))+Rate of Deactivation for Plug Flow*Time Interval)/Space Time for 1st Order Catalyzed Reactions

Can the Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids be negative?

No, the Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids, measured in First Order Reaction Rate Constant cannot be negative.

Which unit is used to measure Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids?

Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids is usually measured using the 1 Per Second[s⁻¹] for First Order Reaction Rate Constant. 1 Per Millisecond[s⁻¹], 1 Per Day[s⁻¹], 1 Per Hour[s⁻¹] are the few other units in which Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids Formula

​GoRate Constant based on Weight of Catalyst in Batch Solids and Batch Fluids Formula

​GoRate Constant based on Weight of Catalyst in Batch Solids and Mixed Constant Flow of Fluids Formula

Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids Example

Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids Solution

Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids Formula Elements

Other Formulas to find Rate Constant based on Weight of Catalyst

Other formulas in Deactivating Catalysts category

How to Evaluate Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids?

FAQs on Rate Constant based on Weight of Catalyst in Batch Solids and Mixed Changing Flow of Fluids

Variable Name

GoRate Constant based on Weight of Catalyst in Batch Solids and Batch Fluids Formula

GoRate Constant based on Weight of Catalyst in Batch Solids and Mixed Constant Flow of Fluids Formula