FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Radius of flushing hole Formula

Fx Copy

LaTeX Copy

Radius of flushing hole is the radius of flushing hole in EDM. Check FAQs

R 1 = \frac{R 0}{\exp (\frac{π \cdot (P 1 - P atm) \cdot h^{3}}{Q \cdot 6 \cdot μ v})}

R₁ - Radius of Flushing Hole?R₀ - Radius of the Electrodes?P₁ - Pressure in Flushing Hole?P_atm - Atmospheric Pressure?h - Gap Spacing?Q - Flow Rate of the Electrolyte?μ_v - Dynamic Viscosity?π - Archimedes' constant?

Radius of flushing hole Example

With values

With units

Only example

Here is how the Radius of flushing hole equation looks like with Values.

Here is how the Radius of flushing hole equation looks like with Units.

Here is how the Radius of flushing hole equation looks like.

3.98 = \frac{5}{\exp (\frac{3.1416 \cdot (11 - 10) \cdot 2^{3}}{0.18 \cdot 6 \cdot 10.2})}

3.98cm = \frac{5cm}{\exp (\frac{3.1416 \cdot (11N/cm² - 10N/cm²) \cdot {2cm}^{3}}{0.18m³/s \cdot 6 \cdot 10.2P})}

3.98 = \frac{5}{\exp (\frac{3.1416 \cdot (11 - 10) \cdot 2^{3}}{0.18 \cdot 6 \cdot 10.2})}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Unconventional machining processes » fx Radius of flushing hole

Radius of flushing hole Solution

Follow our step by step solution on how to calculate Radius of flushing hole?

FIRST Step Consider the formula

R 1 = \frac{R 0}{\exp (\frac{π \cdot (P 1 - P atm) \cdot h^{3}}{Q \cdot 6 \cdot μ v})}

Next Step Substitute values of Variables

∴

R 1 = \frac{5cm}{\exp (\frac{π \cdot (11N/cm² - 10N/cm²) \cdot {2cm}^{3}}{0.18m³/s \cdot 6 \cdot 10.2P})}

Next Step Substitute values of Constants

∴

R 1 = \frac{5cm}{\exp (\frac{3.1416 \cdot (11N/cm² - 10N/cm²) \cdot {2cm}^{3}}{0.18m³/s \cdot 6 \cdot 10.2P})}

Next Step Convert Units

∴

R 1 = \frac{0.05m}{\exp (\frac{3.1416 \cdot (110000Pa - 100000Pa) \cdot {0.02m}^{3}}{0.18m³/s \cdot 6 \cdot 1.02Pa*s})}

Next Step Prepare to Evaluate

∴

R 1 = \frac{0.05}{\exp (\frac{3.1416 \cdot (110000 - 100000) \cdot {0.02}^{3}}{0.18 \cdot 6 \cdot 1.02})}

Next Step Evaluate

∴

R 1 = 0.0398003374456498m

Next Step Convert to Output's Unit

∴

R 1 = 3.98003374456498cm

LAST Step Rounding Answer

∴

R 1 = 3.98cm

Radius of flushing hole Formula Elements

Variables

Constants

Functions

Radius of Flushing Hole

Radius of flushing hole is the radius of flushing hole in EDM.

Symbol: R₁

Measurement: LengthUnit: cm

Note: Value should be greater than 0.

Formulas to find Radius of Flushing Hole

Radius of the Electrodes

Radius of the electrodes is defined as the radius of the electrode used for unconventional machining by EDM.

Symbol: R₀

Measurement: LengthUnit: cm

Note: Value can be positive or negative.

Formulas to find Radius of the Electrodes

Pressure in Flushing Hole

Pressure in Flushing Hole is the pressure in hole during EDM machining.

Symbol: P₁

Measurement: PressureUnit: N/cm²

Note: Value should be greater than 0.

Formulas to find Pressure in Flushing Hole

Atmospheric Pressure

Atmospheric pressure, also known as barometric pressure, is the pressure within the atmosphere of Earth.

Symbol: P_atm

Measurement: PressureUnit: N/cm²

Note: Value can be positive or negative.

Formulas to find Atmospheric Pressure

Gap Spacing

Gap spacing is the width of distance between electrode and work during EDM.

Symbol: h

Measurement: LengthUnit: cm

Note: Value should be greater than 0.

Formulas to find Gap Spacing

Flow Rate of the Electrolyte

Flow rate of the electrolyte is the flow rate of the electrolyte used in EDM.

Symbol: Q

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value can be positive or negative.

Formulas to find Flow Rate of the Electrolyte

Dynamic Viscosity

The Dynamic Viscosity of a fluid is the measure of its resistance to flow when an external force is applied.

Symbol: μ_v

Measurement: Dynamic ViscosityUnit: P

Note: Value should be greater than 0.

Formulas to find Dynamic Viscosity

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

exp

n an exponential function, the value of the function changes by a constant factor for every unit change in the independent variable.

Syntax: exp(Number)

Other formulas in Flow rate of the electrolyte category

Go Flow rate of electrolyte

Q = \frac{π \cdot (P 1 - P atm) \cdot h^{3}}{6 \cdot μ v \cdot \ln (\frac{R 0}{R 1})}

Go Gap spacing

h = {(\frac{Q \cdot 6 \cdot μ v \cdot \ln (\frac{R 0}{R 1})}{π \cdot (P 1 - P atm)})}^{\frac{1}{3}}

How to Evaluate Radius of flushing hole?

Radius of flushing hole evaluator uses Radius of Flushing Hole = Radius of the Electrodes/exp((pi*(Pressure in Flushing Hole-Atmospheric Pressure)*Gap Spacing^3)/(Flow Rate of the Electrolyte*6*Dynamic Viscosity)) to evaluate the Radius of Flushing Hole, The Radius of flushing hole formula is defined as the radius of the hollow part of electrode which contains the entrance/exit to the dielectric fluid. Radius of Flushing Hole is denoted by R₁ symbol.

How to evaluate Radius of flushing hole using this online evaluator? To use this online evaluator for Radius of flushing hole, enter Radius of the Electrodes (R₀), Pressure in Flushing Hole (P₁), Atmospheric Pressure (P_atm), Gap Spacing (h), Flow Rate of the Electrolyte (Q) & Dynamic Viscosity (μ_v) and hit the calculate button.

FAQs on Radius of flushing hole

What is the formula to find Radius of flushing hole?

The formula of Radius of flushing hole is expressed as Radius of Flushing Hole = Radius of the Electrodes/exp((pi*(Pressure in Flushing Hole-Atmospheric Pressure)*Gap Spacing^3)/(Flow Rate of the Electrolyte*6*Dynamic Viscosity)). Here is an example- 493.2022 = 0.05/exp((pi*(110000-100000)*0.02^3)/(0.18*6*1.02)).

How to calculate Radius of flushing hole?

With Radius of the Electrodes (R₀), Pressure in Flushing Hole (P₁), Atmospheric Pressure (P_atm), Gap Spacing (h), Flow Rate of the Electrolyte (Q) & Dynamic Viscosity (μ_v) we can find Radius of flushing hole using the formula - Radius of Flushing Hole = Radius of the Electrodes/exp((pi*(Pressure in Flushing Hole-Atmospheric Pressure)*Gap Spacing^3)/(Flow Rate of the Electrolyte*6*Dynamic Viscosity)). This formula also uses Archimedes' constant and Exponential Growth (exp) function(s).

Can the Radius of flushing hole be negative?

No, the Radius of flushing hole, measured in Length cannot be negative.

Which unit is used to measure Radius of flushing hole?

Radius of flushing hole is usually measured using the Centimeter[cm] for Length. Meter[cm], Millimeter[cm], Kilometer[cm] are the few other units in which Radius of flushing hole can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Radius of flushing hole Formula

Radius of flushing hole Example

Radius of flushing hole Solution

Radius of flushing hole Formula Elements

Other formulas in Flow rate of the electrolyte category

How to Evaluate Radius of flushing hole?

FAQs on Radius of flushing hole

Variable Name