FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Quantity of Lubricating Oil Formula

Fx Copy

LaTeX Copy

Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines. Check FAQs

Q = (HP \cdot η \cdot \frac{0.0027}{0.74}) + (\frac{C}{5 \cdot t})

Q - Quantity of Oil?HP - Engine power?η - Operating Factor?C - Crankcase Capacity?t - Time between Change of Oil?

Quantity of Lubricating Oil Example

With values

With units

Only example

Here is how the Quantity of Lubricating Oil equation looks like with Values.

Here is how the Quantity of Lubricating Oil equation looks like with Units.

Here is how the Quantity of Lubricating Oil equation looks like.

0.4103 = (160 \cdot 0.6 \cdot \frac{0.0027}{0.74}) + (\frac{30}{5 \cdot 100})

0.4103L/h = (160hp \cdot 0.6 \cdot \frac{0.0027}{0.74}) + (\frac{30L}{5 \cdot 100h})

0.4103 = (160 \cdot 0.6 \cdot \frac{0.0027}{0.74}) + (\frac{30}{5 \cdot 100})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Construction Practice, Planning and Management » fx Quantity of Lubricating Oil

Quantity of Lubricating Oil Solution

Follow our step by step solution on how to calculate Quantity of Lubricating Oil?

FIRST Step Consider the formula

Q = (HP \cdot η \cdot \frac{0.0027}{0.74}) + (\frac{C}{5 \cdot t})

Next Step Substitute values of Variables

∴

Q = (160hp \cdot 0.6 \cdot \frac{0.0027}{0.74}) + (\frac{30L}{5 \cdot 100h})

Next Step Prepare to Evaluate

∴

Q = (160 \cdot 0.6 \cdot \frac{0.0027}{0.74}) + (\frac{30}{5 \cdot 100})

Next Step Evaluate

∴

Q = 1.13963963963964E-07m³/s

Next Step Convert to Output's Unit

∴

Q = 0.41027027027027L/h

LAST Step Rounding Answer

∴

Q = 0.4103L/h

Quantity of Lubricating Oil Formula Elements

Variables

Quantity of Oil

Quantity of Oil is the amount of oil or lubricating oil that is needed as fuel for machines.

Symbol: Q

Measurement: Volumetric Flow RateUnit: L/h

Note: Value should be greater than 0.

Formulas to find Quantity of Oil

Engine power

Engine power is the power that the engine can put out.

Symbol: HP

Measurement: PowerUnit: hp

Note: Value can be positive or negative.

Formulas to find Engine power

Operating Factor

Operating Factor is the ratio of time worked to reference time.

Symbol: η

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Operating Factor

Crankcase Capacity

Crankcase capacity is the housing for the crankshaft in a reciprocating internal combustion engine.

Symbol: C

Measurement: VolumeUnit: L

Note: Value should be greater than 0.

Formulas to find Crankcase Capacity

Time between Change of Oil

The Time between Change of Oil here refers to the time taken or the number of hours taken between the change of oil.

Symbol: t

Measurement: TimeUnit: h

Note: Value should be greater than 0.

Formulas to find Time between Change of Oil

Other formulas in Management of Construction Equipment category

Go Hourly Depreciation

D h = 0.9 \cdot \frac{C bv}{L s}

Go Life Span of Machine

L s = 0.9 \cdot \frac{C bv}{D h}

Go Book Value for New Machine

C bv = \frac{D h \cdot L s}{0.9}

Go Average Investment when Salvage value is 0

I a = (\frac{1 + n}{2 \cdot n}) \cdot P Capital

How to Evaluate Quantity of Lubricating Oil?

Quantity of Lubricating Oil evaluator uses Quantity of Oil = (Engine power*Operating Factor*0.0027/0.74)+(Crankcase Capacity/(5*Time between Change of Oil)) to evaluate the Quantity of Oil, The Quantity of Lubricating Oil formula is defined as calculating the cost of fuel used for the construction equipment. Quantity of Oil is denoted by Q symbol.

How to evaluate Quantity of Lubricating Oil using this online evaluator? To use this online evaluator for Quantity of Lubricating Oil, enter Engine power (HP), Operating Factor (η), Crankcase Capacity (C) & Time between Change of Oil (t) and hit the calculate button.

FAQs on Quantity of Lubricating Oil

What is the formula to find Quantity of Lubricating Oil?

The formula of Quantity of Lubricating Oil is expressed as Quantity of Oil = (Engine power*Operating Factor*0.0027/0.74)+(Crankcase Capacity/(5*Time between Change of Oil)). Here is an example- 1.5E+6 = (119311.97952*0.6*0.0027/0.74)+(0.03/(5*360000)).

How to calculate Quantity of Lubricating Oil?

With Engine power (HP), Operating Factor (η), Crankcase Capacity (C) & Time between Change of Oil (t) we can find Quantity of Lubricating Oil using the formula - Quantity of Oil = (Engine power*Operating Factor*0.0027/0.74)+(Crankcase Capacity/(5*Time between Change of Oil)).

Can the Quantity of Lubricating Oil be negative?

No, the Quantity of Lubricating Oil, measured in Volumetric Flow Rate cannot be negative.

Which unit is used to measure Quantity of Lubricating Oil?

Quantity of Lubricating Oil is usually measured using the Liter per hour[L/h] for Volumetric Flow Rate. Cubic Meter per Second[L/h], Cubic Meter per Day[L/h], Cubic Meter per Hour[L/h] are the few other units in which Quantity of Lubricating Oil can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Quantity of Lubricating Oil Formula

Quantity of Lubricating Oil Example

Quantity of Lubricating Oil Solution

Quantity of Lubricating Oil Formula Elements

Other formulas in Management of Construction Equipment category

How to Evaluate Quantity of Lubricating Oil?

FAQs on Quantity of Lubricating Oil

Variable Name