FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Probability of Synchronizer Failure Formula

Fx Copy

LaTeX Copy

Probability of Synchronizer Failure is defined as the times where synchronizer failure is likely to happen. Check FAQs

P fail = \frac{1}{MTBF}

P_fail - Probability of Synchronizer Failure?MTBF - Acceptable MTBF?

Probability of Synchronizer Failure Example

With values

With units

Only example

Here is how the Probability of Synchronizer Failure equation looks like with Values.

Here is how the Probability of Synchronizer Failure equation looks like with Units.

Here is how the Probability of Synchronizer Failure equation looks like.

0.4 = \frac{1}{2.5}

0.4 = \frac{1}{2.5}

0.4 = \frac{1}{2.5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electronics » Category

CMOS Design and Applications » fx Probability of Synchronizer Failure

Probability of Synchronizer Failure Solution

Follow our step by step solution on how to calculate Probability of Synchronizer Failure?

FIRST Step Consider the formula

P fail = \frac{1}{MTBF}

Next Step Substitute values of Variables

∴

P fail = \frac{1}{2.5}

Next Step Prepare to Evaluate

∴

P fail = \frac{1}{2.5}

LAST Step Evaluate

∴

P fail = 0.4

Probability of Synchronizer Failure Formula Elements

Variables

Probability of Synchronizer Failure

Probability of Synchronizer Failure is defined as the times where synchronizer failure is likely to happen.

Symbol: P_fail

Measurement: NAUnit: Unitless

Note: Value should be less than 1.

Formulas to find Probability of Synchronizer Failure

Acceptable MTBF

Acceptable MTBF is defined as mean time between failures which increases exponentially with cycle time.

Symbol: MTBF

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Acceptable MTBF

Other formulas in CMOS Time Characteristics category

Go Aperture Time for Rising Input

t ar = T setup1 + T hold0

Go Aperture Time for Falling Input

t af = T setup0 + T hold1

Go Setup Time at High Logic

T setup1 = t ar - T hold0

Go Setup Time at Low Logic

T setup0 = t af - T hold1

How to Evaluate Probability of Synchronizer Failure?

Probability of Synchronizer Failure evaluator uses Probability of Synchronizer Failure = 1/Acceptable MTBF to evaluate the Probability of Synchronizer Failure, The Probability of synchronizer failure This refers to the likelihood that the synchronizer circuit within the CMOS VLSI circuit fails to properly synchronize signals, potentially causing data corruption or other issues. Probability of Synchronizer Failure is denoted by P_fail symbol.

How to evaluate Probability of Synchronizer Failure using this online evaluator? To use this online evaluator for Probability of Synchronizer Failure, enter Acceptable MTBF (MTBF) and hit the calculate button.

FAQs on Probability of Synchronizer Failure

What is the formula to find Probability of Synchronizer Failure?

The formula of Probability of Synchronizer Failure is expressed as Probability of Synchronizer Failure = 1/Acceptable MTBF. Here is an example- 4 = 1/2.5.

How to calculate Probability of Synchronizer Failure?

With Acceptable MTBF (MTBF) we can find Probability of Synchronizer Failure using the formula - Probability of Synchronizer Failure = 1/Acceptable MTBF.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit