FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Pressure Head due to Acceleration in Suction Pipe Formula

Fx Copy

LaTeX Copy

Pressure head due to acceleration in suction pipe is the pressure generated in the suction pipe of a single acting pump due to acceleration of the fluid. Check FAQs

h as = \frac{l s \cdot A \cdot (ω^{2}) \cdot r \cdot \cos (θ crnk)}{[g] \cdot a s}

h_as - Pressure head due to acceleration in suction pipe?l_s - Length of suction pipe?A - Area of cylinder?ω - Angular Velocity?r - Radius of crank?θ_crnk - Angle turned by crank?a_s - Area of Suction Pipe?[g] - Gravitational acceleration on Earth?

Pressure Head due to Acceleration in Suction Pipe Example

With values

With units

Only example

Here is how the Pressure Head due to Acceleration in Suction Pipe equation looks like with Values.

Here is how the Pressure Head due to Acceleration in Suction Pipe equation looks like with Units.

Here is how the Pressure Head due to Acceleration in Suction Pipe equation looks like.

0.2146 = \frac{2.5 \cdot 0.6 \cdot ({2.5}^{2}) \cdot 0.09 \cdot \cos (12.8)}{9.8066 \cdot 0.39}

0.2146m = \frac{2.5m \cdot 0.6m² \cdot ({2.5rad/s}^{2}) \cdot 0.09m \cdot \cos (12.8rad)}{9.8066m/s² \cdot 0.39m²}

0.2146 = \frac{2.5 \cdot 0.6 \cdot ({2.5}^{2}) \cdot 0.09 \cdot \cos (12.8)}{9.8066 \cdot 0.39}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Fluid Mechanics » fx Pressure Head due to Acceleration in Suction Pipe

Pressure Head due to Acceleration in Suction Pipe Solution

Follow our step by step solution on how to calculate Pressure Head due to Acceleration in Suction Pipe?

FIRST Step Consider the formula

h as = \frac{l s \cdot A \cdot (ω^{2}) \cdot r \cdot \cos (θ crnk)}{[g] \cdot a s}

Next Step Substitute values of Variables

∴

h as = \frac{2.5m \cdot 0.6m² \cdot ({2.5rad/s}^{2}) \cdot 0.09m \cdot \cos (12.8rad)}{[g] \cdot 0.39m²}

Next Step Substitute values of Constants

∴

h as = \frac{2.5m \cdot 0.6m² \cdot ({2.5rad/s}^{2}) \cdot 0.09m \cdot \cos (12.8rad)}{9.8066m/s² \cdot 0.39m²}

Next Step Prepare to Evaluate

∴

h as = \frac{2.5 \cdot 0.6 \cdot ({2.5}^{2}) \cdot 0.09 \cdot \cos (12.8)}{9.8066 \cdot 0.39}

Next Step Evaluate

∴

h as = 0.214618227350753m

LAST Step Rounding Answer

∴

h as = 0.2146m

Pressure Head due to Acceleration in Suction Pipe Formula Elements

Variables

Constants

Functions

Pressure head due to acceleration in suction pipe

Pressure head due to acceleration in suction pipe is the pressure generated in the suction pipe of a single acting pump due to acceleration of the fluid.

Symbol: h_as

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Pressure head due to acceleration in suction pipe

Length of suction pipe

Length of suction pipe is the distance from the centerline of the pump to the center of the suction inlet of a single acting reciprocating pump.

Symbol: l_s

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Length of suction pipe

Area of cylinder

Area of cylinder is the area of the circular base of a cylinder, used to calculate the volume of a single acting pump.

Symbol: A

Measurement: AreaUnit: m²

Note: Value can be positive or negative.

Formulas to find Area of cylinder

Angular Velocity

Angular Velocity is the measure of how fast the pump's crankshaft rotates, determining the pump's speed and efficiency in a single acting pump system.

Symbol: ω

Measurement: Angular VelocityUnit: rad/s

Note: Value can be positive or negative.

Formulas to find Angular Velocity

Radius of crank

Radius of crank is the distance from the axis of rotation to the point where the connecting rod is attached in a single acting pump.

Symbol: r

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Radius of crank

Angle turned by crank

Angle turned by crank is the rotation of the crankshaft in a single acting pump that converts rotary motion into reciprocating motion.

Symbol: θ_crnk

Measurement: AngleUnit: rad

Note: Value can be positive or negative.

Formulas to find Angle turned by crank

Area of Suction Pipe

Area of Suction Pipe is the cross-sectional area of the pipe that connects the pump to the suction source in a single acting pump system.

Symbol: a_s

Measurement: AreaUnit: m²

Note: Value can be positive or negative.

Formulas to find Area of Suction Pipe

Gravitational acceleration on Earth

Gravitational acceleration on Earth means that the velocity of an object in free fall will increase by 9.8 m/s2 every second.

Symbol: [g]

Value: 9.80665 m/s²

cos

Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle.

Syntax: cos(Angle)

Other formulas in Single Acting Pumps category

Go Work Done by Single-acting Pump considering all Head Losses

W fd = (SW \cdot A \cdot L \cdot \frac{N}{60}) \cdot (h s + h del + ((\frac{2}{3}) \cdot h fs) + ((\frac{2}{3}) \cdot h fd))

Go Work done against friction in suction pipe

W fs = (\frac{2}{3}) \cdot L \cdot h fs

How to Evaluate Pressure Head due to Acceleration in Suction Pipe?

Pressure Head due to Acceleration in Suction Pipe evaluator uses Pressure head due to acceleration in suction pipe = (Length of suction pipe*Area of cylinder*(Angular Velocity^2)*Radius of crank*cos(Angle turned by crank))/([g]*Area of Suction Pipe) to evaluate the Pressure head due to acceleration in suction pipe, Pressure Head due to Acceleration in Suction Pipe formula is defined as the pressure head generated in the suction pipe of a reciprocating pump due to the acceleration of the fluid, which affects the pump's performance and overall efficiency. Pressure head due to acceleration in suction pipe is denoted by h_as symbol.

How to evaluate Pressure Head due to Acceleration in Suction Pipe using this online evaluator? To use this online evaluator for Pressure Head due to Acceleration in Suction Pipe, enter Length of suction pipe (l_s), Area of cylinder (A), Angular Velocity (ω), Radius of crank (r), Angle turned by crank (θ_crnk) & Area of Suction Pipe (a_s) and hit the calculate button.

FAQs on Pressure Head due to Acceleration in Suction Pipe

What is the formula to find Pressure Head due to Acceleration in Suction Pipe?

The formula of Pressure Head due to Acceleration in Suction Pipe is expressed as Pressure head due to acceleration in suction pipe = (Length of suction pipe*Area of cylinder*(Angular Velocity^2)*Radius of crank*cos(Angle turned by crank))/([g]*Area of Suction Pipe). Here is an example- 0.214618 = (2.5*0.6*(2.5^2)*0.09*cos(12.8))/([g]*0.39).

How to calculate Pressure Head due to Acceleration in Suction Pipe?

With Length of suction pipe (l_s), Area of cylinder (A), Angular Velocity (ω), Radius of crank (r), Angle turned by crank (θ_crnk) & Area of Suction Pipe (a_s) we can find Pressure Head due to Acceleration in Suction Pipe using the formula - Pressure head due to acceleration in suction pipe = (Length of suction pipe*Area of cylinder*(Angular Velocity^2)*Radius of crank*cos(Angle turned by crank))/([g]*Area of Suction Pipe). This formula also uses Gravitational acceleration on Earth constant(s) and Cosine (cos) function(s).

Can the Pressure Head due to Acceleration in Suction Pipe be negative?

Yes, the Pressure Head due to Acceleration in Suction Pipe, measured in Length can be negative.

Which unit is used to measure Pressure Head due to Acceleration in Suction Pipe?

Pressure Head due to Acceleration in Suction Pipe is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Pressure Head due to Acceleration in Suction Pipe can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Pressure Head due to Acceleration in Suction Pipe Formula

Pressure Head due to Acceleration in Suction Pipe Example

Pressure Head due to Acceleration in Suction Pipe Solution

Pressure Head due to Acceleration in Suction Pipe Formula Elements

Other formulas in Single Acting Pumps category

How to Evaluate Pressure Head due to Acceleration in Suction Pipe?

FAQs on Pressure Head due to Acceleration in Suction Pipe

Variable Name