FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Pressure Drop when Anchorage Slip and Settling Length are Considered Formula

GoPressure Drop given Setting Length Formula

Fx Copy

LaTeX Copy

Prestress Drop is the drop in applied prestress force due to strain in tendons. Check FAQs

Δf p = \frac{Δ \cdot A p \cdot E s}{l set \cdot 0.5}

Δf_p - Prestress Drop?Δ - Slip of Anchorage?A_p - Steel Area in Prestress?E_s - Modulus of Elasticity of Steel Reinforcement?l_set - Settling Length?

Pressure Drop when Anchorage Slip and Settling Length are Considered Example

With values

With units

Only example

Here is how the Pressure Drop when Anchorage Slip and Settling Length are Considered equation looks like with Values.

Here is how the Pressure Drop when Anchorage Slip and Settling Length are Considered equation looks like with Units.

Here is how the Pressure Drop when Anchorage Slip and Settling Length are Considered equation looks like.

12.0192 = \frac{5 \cdot 0.25 \cdot 200000}{41.6 \cdot 0.5}

12.0192MPa = \frac{5mm \cdot 0.25mm² \cdot 200000MPa}{41.6m \cdot 0.5}

12.0192 = \frac{5 \cdot 0.25 \cdot 200000}{41.6 \cdot 0.5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Structural Engineering » fx Pressure Drop when Anchorage Slip and Settling Length are Considered

Pressure Drop when Anchorage Slip and Settling Length are Considered Solution

Follow our step by step solution on how to calculate Pressure Drop when Anchorage Slip and Settling Length are Considered?

FIRST Step Consider the formula

Δf p = \frac{Δ \cdot A p \cdot E s}{l set \cdot 0.5}

Next Step Substitute values of Variables

∴

Δf p = \frac{5mm \cdot 0.25mm² \cdot 200000MPa}{41.6m \cdot 0.5}

Next Step Convert Units

∴

Δf p = \frac{5mm \cdot 0.25mm² \cdot 200000MPa}{41600mm \cdot 0.5}

Next Step Prepare to Evaluate

∴

Δf p = \frac{5 \cdot 0.25 \cdot 200000}{41600 \cdot 0.5}

Next Step Evaluate

∴

Δf p = 12019230.7692308Pa

Next Step Convert to Output's Unit

∴

Δf p = 12.0192307692308MPa

LAST Step Rounding Answer

∴

Δf p = 12.0192MPa

Pressure Drop when Anchorage Slip and Settling Length are Considered Formula Elements

Variables

Prestress Drop

Prestress Drop is the drop in applied prestress force due to strain in tendons.

Symbol: Δf_p

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Prestress Drop

Slip of Anchorage

Slip of Anchorage is the distance by which the anchorage gets slipped when the force is transmitted from anchorage to tendon.

Symbol: Δ

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Slip of Anchorage

Steel Area in Prestress

Steel Area in Prestress is the total cross sectional area of tendons.

Symbol: A_p

Measurement: AreaUnit: mm²

Note: Value should be greater than 0.

Formulas to find Steel Area in Prestress

Modulus of Elasticity of Steel Reinforcement

Modulus of Elasticity of Steel Reinforcement is a measure of its stiffness.

Symbol: E_s

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Modulus of Elasticity of Steel Reinforcement

Settling Length

Settling Length is the length where the effect of anchorage friction is absent.

Symbol: l_set

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Settling Length

Other Formulas to find Prestress Drop

Go Pressure Drop given Setting Length

Δf p = 2 \cdot P \cdot η \cdot l set

Other formulas in Force Variation Diagram and Loss Due to Anchorage Slip category

Go Loss of Prestress due to Slip

F = A Tendon \cdot \frac{E s \cdot Δ}{PL Cable}

Go Slip of Anchorage

Δ = F \cdot \frac{PL Cable}{A Tendon \cdot E s}

Go Prestressing Force at distance x when Reverse Friction is Considered

P x = (P - Δf p) \cdot \exp (η \cdot x)

Go Prestressing Force after Immediate Loss when Reverse Friction Effect is Considered

P = (\frac{P x}{\exp (η \cdot x)}) + Δf p

How to Evaluate Pressure Drop when Anchorage Slip and Settling Length are Considered?

Pressure Drop when Anchorage Slip and Settling Length are Considered evaluator uses Prestress Drop = (Slip of Anchorage*Steel Area in Prestress*Modulus of Elasticity of Steel Reinforcement)/(Settling Length*0.5) to evaluate the Prestress Drop, The Pressure Drop when Anchorage Slip and Settling Length are Considered is defined as the drop in prestress force when the friction and wobble effects are considered along with the slip in anchorage. Prestress Drop is denoted by Δf_p symbol.

How to evaluate Pressure Drop when Anchorage Slip and Settling Length are Considered using this online evaluator? To use this online evaluator for Pressure Drop when Anchorage Slip and Settling Length are Considered, enter Slip of Anchorage (Δ), Steel Area in Prestress (A_p), Modulus of Elasticity of Steel Reinforcement (E_s) & Settling Length (l_set) and hit the calculate button.

FAQs on Pressure Drop when Anchorage Slip and Settling Length are Considered

What is the formula to find Pressure Drop when Anchorage Slip and Settling Length are Considered?

The formula of Pressure Drop when Anchorage Slip and Settling Length are Considered is expressed as Prestress Drop = (Slip of Anchorage*Steel Area in Prestress*Modulus of Elasticity of Steel Reinforcement)/(Settling Length*0.5). Here is an example- 1E-5 = (0.005*2.5E-07*200000000000)/(41.6*0.5).

How to calculate Pressure Drop when Anchorage Slip and Settling Length are Considered?

With Slip of Anchorage (Δ), Steel Area in Prestress (A_p), Modulus of Elasticity of Steel Reinforcement (E_s) & Settling Length (l_set) we can find Pressure Drop when Anchorage Slip and Settling Length are Considered using the formula - Prestress Drop = (Slip of Anchorage*Steel Area in Prestress*Modulus of Elasticity of Steel Reinforcement)/(Settling Length*0.5).

What are the other ways to Calculate Prestress Drop?

Here are the different ways to Calculate Prestress Drop-

Prestress Drop=2*Prestressing force after Immediate Losses*Simplified Term*Settling Length

Can the Pressure Drop when Anchorage Slip and Settling Length are Considered be negative?

No, the Pressure Drop when Anchorage Slip and Settling Length are Considered, measured in Pressure cannot be negative.

Which unit is used to measure Pressure Drop when Anchorage Slip and Settling Length are Considered?

Pressure Drop when Anchorage Slip and Settling Length are Considered is usually measured using the Megapascal[MPa] for Pressure. Pascal[MPa], Kilopascal[MPa], Bar[MPa] are the few other units in which Pressure Drop when Anchorage Slip and Settling Length are Considered can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Pressure Drop when Anchorage Slip and Settling Length are Considered Formula

​GoPressure Drop given Setting Length Formula

Pressure Drop when Anchorage Slip and Settling Length are Considered Example

Pressure Drop when Anchorage Slip and Settling Length are Considered Solution

Pressure Drop when Anchorage Slip and Settling Length are Considered Formula Elements

Other Formulas to find Prestress Drop

Other formulas in Force Variation Diagram and Loss Due to Anchorage Slip category

How to Evaluate Pressure Drop when Anchorage Slip and Settling Length are Considered?

FAQs on Pressure Drop when Anchorage Slip and Settling Length are Considered

Variable Name

GoPressure Drop given Setting Length Formula