FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Pressure Drop given Setting Length Formula

GoPressure Drop when Anchorage Slip and Settling Length are Considered Formula

Fx Copy

LaTeX Copy

Prestress Drop is the drop in applied prestress force due to strain in tendons. Check FAQs

Δf p = 2 \cdot P \cdot η \cdot l set

Δf_p - Prestress Drop?P - Prestressing force after Immediate Losses?η - Simplified Term?l_set - Settling Length?

Pressure Drop given Setting Length Example

With values

With units

Only example

Here is how the Pressure Drop given Setting Length equation looks like with Values.

Here is how the Pressure Drop given Setting Length equation looks like with Units.

Here is how the Pressure Drop given Setting Length equation looks like.

9.989 = 2 \cdot 20.01 \cdot 6 \cdot 41.6

9.989MPa = 2 \cdot 20.01kN \cdot 6 \cdot 41.6m

9.989 = 2 \cdot 20.01 \cdot 6 \cdot 41.6

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Structural Engineering » fx Pressure Drop given Setting Length

Pressure Drop given Setting Length Solution

Follow our step by step solution on how to calculate Pressure Drop given Setting Length?

FIRST Step Consider the formula

Δf p = 2 \cdot P \cdot η \cdot l set

Next Step Substitute values of Variables

∴

Δf p = 2 \cdot 20.01kN \cdot 6 \cdot 41.6m

Next Step Convert Units

∴

Δf p = 2 \cdot 20010N \cdot 6 \cdot 41.6m

Next Step Prepare to Evaluate

∴

Δf p = 2 \cdot 20010 \cdot 6 \cdot 41.6

Next Step Evaluate

∴

Δf p = 9988992Pa

Next Step Convert to Output's Unit

∴

Δf p = 9.988992MPa

LAST Step Rounding Answer

∴

Δf p = 9.989MPa

Pressure Drop given Setting Length Formula Elements

Variables

Prestress Drop

Prestress Drop is the drop in applied prestress force due to strain in tendons.

Symbol: Δf_p

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Prestress Drop

Prestressing force after Immediate Losses

Prestressing force after Immediate Losses is force after immediate losses. It is also called as reduced value of prestressing force after elastic shortening, anchorage slip and loss due to friction.

Symbol: P

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Prestressing force after Immediate Losses

Simplified Term

Simplified Term here represents the value which is equal to (μa+kx)/x.

Symbol: η

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Simplified Term

Settling Length

Settling Length is the length where the effect of anchorage friction is absent.

Symbol: l_set

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Settling Length

Other Formulas to find Prestress Drop

Go Pressure Drop when Anchorage Slip and Settling Length are Considered

Δf p = \frac{Δ \cdot A p \cdot E s}{l set \cdot 0.5}

Other formulas in Force Variation Diagram and Loss Due to Anchorage Slip category

Go Loss of Prestress due to Slip

F = A Tendon \cdot \frac{E s \cdot Δ}{PL Cable}

Go Slip of Anchorage

Δ = F \cdot \frac{PL Cable}{A Tendon \cdot E s}

Go Prestressing Force at distance x when Reverse Friction is Considered

P x = (P - Δf p) \cdot \exp (η \cdot x)

Go Prestressing Force after Immediate Loss when Reverse Friction Effect is Considered

P = (\frac{P x}{\exp (η \cdot x)}) + Δf p

How to Evaluate Pressure Drop given Setting Length?

Pressure Drop given Setting Length evaluator uses Prestress Drop = 2*Prestressing force after Immediate Losses*Simplified Term*Settling Length to evaluate the Prestress Drop, The Pressure Drop given Setting Length is defined as the prestress change or decrease due to losses in prestress and effect of reverse friction. Prestress Drop is denoted by Δf_p symbol.

How to evaluate Pressure Drop given Setting Length using this online evaluator? To use this online evaluator for Pressure Drop given Setting Length, enter Prestressing force after Immediate Losses (P), Simplified Term (η) & Settling Length (l_set) and hit the calculate button.

FAQs on Pressure Drop given Setting Length

What is the formula to find Pressure Drop given Setting Length?

The formula of Pressure Drop given Setting Length is expressed as Prestress Drop = 2*Prestressing force after Immediate Losses*Simplified Term*Settling Length. Here is an example- 1E-5 = 2*prestressing_force_po*6*41.6.

How to calculate Pressure Drop given Setting Length?

With Prestressing force after Immediate Losses (P), Simplified Term (η) & Settling Length (l_set) we can find Pressure Drop given Setting Length using the formula - Prestress Drop = 2*Prestressing force after Immediate Losses*Simplified Term*Settling Length.

What are the other ways to Calculate Prestress Drop?

Here are the different ways to Calculate Prestress Drop-

Prestress Drop=(Slip of Anchorage*Steel Area in Prestress*Modulus of Elasticity of Steel Reinforcement)/(Settling Length*0.5)

Can the Pressure Drop given Setting Length be negative?

No, the Pressure Drop given Setting Length, measured in Pressure cannot be negative.

Which unit is used to measure Pressure Drop given Setting Length?

Pressure Drop given Setting Length is usually measured using the Megapascal[MPa] for Pressure. Pascal[MPa], Kilopascal[MPa], Bar[MPa] are the few other units in which Pressure Drop given Setting Length can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Pressure Drop given Setting Length Formula

​GoPressure Drop when Anchorage Slip and Settling Length are Considered Formula

Pressure Drop given Setting Length Example

Pressure Drop given Setting Length Solution

Pressure Drop given Setting Length Formula Elements

Other Formulas to find Prestress Drop

Other formulas in Force Variation Diagram and Loss Due to Anchorage Slip category

How to Evaluate Pressure Drop given Setting Length?

FAQs on Pressure Drop given Setting Length

Variable Name

GoPressure Drop when Anchorage Slip and Settling Length are Considered Formula