FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) Formula

GoPower Factor using Area of X-Section(Single-Phase Three-Wire OS) Formula

GoPower Factor using Load Current (Single-Phase Three-Wire OS) Formula

Fx Copy

LaTeX Copy

The power factor of an AC electrical power system is defined as the ratio of the real power absorbed by the load to the apparent power flowing in the circuit. Check FAQs

PF = \sqrt{(0.625) \cdot \frac{K}{V}}

PF - Power Factor?K - Constant Overhead AC?V - Volume of Conductor?

Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) Example

With values

With units

Only example

Here is how the Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) equation looks like with Values.

Here is how the Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) equation looks like with Units.

Here is how the Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) equation looks like.

0.1463 = \sqrt{(0.625) \cdot \frac{0.89}{26}}

0.1463 = \sqrt{(0.625) \cdot \frac{0.89}{26m³}}

0.1463 = \sqrt{(0.625) \cdot \frac{0.89}{26}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power System » fx Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS)

Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) Solution

Follow our step by step solution on how to calculate Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS)?

FIRST Step Consider the formula

PF = \sqrt{(0.625) \cdot \frac{K}{V}}

Next Step Substitute values of Variables

∴

PF = \sqrt{(0.625) \cdot \frac{0.89}{26m³}}

Next Step Prepare to Evaluate

∴

PF = \sqrt{(0.625) \cdot \frac{0.89}{26}}

Next Step Evaluate

∴

PF = 0.14626766822928

LAST Step Rounding Answer

∴

PF = 0.1463

Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) Formula Elements

Variables

Functions

Power Factor

The power factor of an AC electrical power system is defined as the ratio of the real power absorbed by the load to the apparent power flowing in the circuit.

Symbol: PF

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Power Factor

Constant Overhead AC

Constant Overhead AC is defined as the constant of line of a Overhead supply system.

Symbol: K

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Constant Overhead AC

Volume of Conductor

Volume of Conductor is the total volume of the material used to make the conductor of an overhead ac line.

Symbol: V

Measurement: VolumeUnit: m³

Note: Value can be positive or negative.

Formulas to find Volume of Conductor

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other Formulas to find Power Factor

Go Power Factor using Area of X-Section(Single-Phase Three-Wire OS)

PF = \sqrt{(P^{2}) \cdot ρ \cdot \frac{L}{A \cdot P loss \cdot ({V m}^{2})}}

Go Power Factor using Load Current (Single-Phase Three-Wire OS)

PF = \frac{P}{\sqrt{Φ} \cdot V m \cdot I}

Go Power Factor using Line Losses (Single-Phase Three-Wire OS)

PF = (\frac{P}{V m}) \cdot \frac{\sqrt{ρ \cdot L}}{P loss \cdot A}

Other formulas in Power and Power Factor category

Go Power Transmitted using Area of X-Section(Single-Phase Three-Wire OS)

P = \sqrt{\frac{A \cdot ({V m}^{2}) \cdot P loss \cdot ({(\cos (Φ))}^{2})}{ρ \cdot L}}

Go Power Transmitted using Load Current (Single-Phase Three-Wire OS)

P = I \cdot V m \cdot \cos (Φ) \cdot \sqrt{2}

Go Power Transmitted using Line Losses (Single-Phase Three-Wire OS)

P = \sqrt{P loss \cdot A \cdot \frac{{(V m \cdot \cos (Φ))}^{2}}{ρ \cdot L}}

Go Power Transmitted using Volume of Conductor Material (Single-Phase Three-Wire OS)

P = \sqrt{P loss \cdot V \cdot \frac{{(V m \cdot \cos (Φ))}^{2}}{2.5 \cdot ρ \cdot {(L)}^{2}}}

How to Evaluate Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS)?

Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) evaluator uses Power Factor = sqrt((0.625)*Constant Overhead AC/Volume of Conductor) to evaluate the Power Factor, The Power Factor using Volume of Conductor Material (single-phase three-wire OS) formula is defined as the cosine of the angle between the voltage phasor and current phasor in an AC circuit. Power Factor is denoted by PF symbol.

How to evaluate Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) using this online evaluator? To use this online evaluator for Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS), enter Constant Overhead AC (K) & Volume of Conductor (V) and hit the calculate button.

FAQs on Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS)

What is the formula to find Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS)?

The formula of Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) is expressed as Power Factor = sqrt((0.625)*Constant Overhead AC/Volume of Conductor). Here is an example- 0.146268 = sqrt((0.625)*0.89/26).

How to calculate Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS)?

With Constant Overhead AC (K) & Volume of Conductor (V) we can find Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) using the formula - Power Factor = sqrt((0.625)*Constant Overhead AC/Volume of Conductor). This formula also uses Square Root (sqrt) function(s).

What are the other ways to Calculate Power Factor?

Here are the different ways to Calculate Power Factor-

Power Factor=sqrt((Power Transmitted^2)*Resistivity*Length of Overhead AC Wire/(Area of Overhead AC Wire*Line Losses*(Maximum Voltage Overhead AC^2)))
Power Factor=Power Transmitted/(sqrt(Phase Difference)*Maximum Voltage Overhead AC*Current Overhead AC)
Power Factor=(Power Transmitted/Maximum Voltage Overhead AC)*sqrt(Resistivity*Length of Overhead AC Wire)/(Line Losses*Area of Overhead AC Wire)

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) Formula

​GoPower Factor using Area of X-Section(Single-Phase Three-Wire OS) Formula

​GoPower Factor using Load Current (Single-Phase Three-Wire OS) Formula

Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) Example

Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) Solution

Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS) Formula Elements

Other Formulas to find Power Factor

Other formulas in Power and Power Factor category

How to Evaluate Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS)?

FAQs on Power Factor using Volume of Conductor Material (Single-Phase Three-Wire OS)

Variable Name

GoPower Factor using Area of X-Section(Single-Phase Three-Wire OS) Formula

GoPower Factor using Load Current (Single-Phase Three-Wire OS) Formula