FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Pole Frequency of STC Networks for Low-Pass Formula

Fx Copy

LaTeX Copy

Pole Frequency Low Pass denotes the frequency at which the filter's response decreases by 3 dB, indicating the cutoff point beyond which higher frequencies are significantly attenuated. Check FAQs

f Lp = \frac{1}{τ}

f_Lp - Pole Frequency Low Pass?τ - Time Constant?

Pole Frequency of STC Networks for Low-Pass Example

With values

With units

Only example

Here is how the Pole Frequency of STC Networks for Low-Pass equation looks like with Values.

Here is how the Pole Frequency of STC Networks for Low-Pass equation looks like with Units.

Here is how the Pole Frequency of STC Networks for Low-Pass equation looks like.

487.8049 = \frac{1}{2.05}

487.8049Hz = \frac{1}{2.05ms}

487.8049 = \frac{1}{2.05}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electronics » Category

Amplifiers » fx Pole Frequency of STC Networks for Low-Pass

Pole Frequency of STC Networks for Low-Pass Solution

Follow our step by step solution on how to calculate Pole Frequency of STC Networks for Low-Pass?

FIRST Step Consider the formula

f Lp = \frac{1}{τ}

Next Step Substitute values of Variables

∴

f Lp = \frac{1}{2.05ms}

Next Step Convert Units

∴

f Lp = \frac{1}{0.002s}

Next Step Prepare to Evaluate

∴

f Lp = \frac{1}{0.002}

Next Step Evaluate

∴

f Lp = 487.80487804878Hz

LAST Step Rounding Answer

∴

f Lp = 487.8049Hz

Pole Frequency of STC Networks for Low-Pass Formula Elements

Variables

Pole Frequency Low Pass

Pole Frequency Low Pass denotes the frequency at which the filter's response decreases by 3 dB, indicating the cutoff point beyond which higher frequencies are significantly attenuated.

Symbol: f_Lp

Measurement: FrequencyUnit: Hz

Note: Value should be greater than 0.

Formulas to find Pole Frequency Low Pass

Time Constant

Time Constant of the response represents the elapsed time required for the system response to decay to zero if the system had continued to decay at the initial rate in amplifiers.

Symbol: τ

Measurement: TimeUnit: ms

Note: Value should be greater than 0.

Formulas to find Time Constant

Other formulas in STC Network category

Go Input Capacitance with reference to Corner Frequency

C in = \frac{1}{f stc \cdot R sig}

Go Pole Frequency of STC Circuit

f stc = \frac{1}{C in \cdot R sig}

Go Input Capacitance of STC Circuit

C stc = C t + C gs

Go Pole Frequency of STC Circuit for High-Pass

f hp = \frac{1}{(C be + C bj) \cdot R in}

How to Evaluate Pole Frequency of STC Networks for Low-Pass?

Pole Frequency of STC Networks for Low-Pass evaluator uses Pole Frequency Low Pass = 1/Time Constant to evaluate the Pole Frequency Low Pass, Pole Frequency of STC Networks for Low-Pass marks the cutoff where the output signal decreases by 3 dB,representing the boundary between allowed and attenuated frequencies. Pole Frequency Low Pass is denoted by f_Lp symbol.

How to evaluate Pole Frequency of STC Networks for Low-Pass using this online evaluator? To use this online evaluator for Pole Frequency of STC Networks for Low-Pass, enter Time Constant (τ) and hit the calculate button.

FAQs on Pole Frequency of STC Networks for Low-Pass

What is the formula to find Pole Frequency of STC Networks for Low-Pass?

The formula of Pole Frequency of STC Networks for Low-Pass is expressed as Pole Frequency Low Pass = 1/Time Constant. Here is an example- 487.8049 = 1/0.00205.

How to calculate Pole Frequency of STC Networks for Low-Pass?

With Time Constant (τ) we can find Pole Frequency of STC Networks for Low-Pass using the formula - Pole Frequency Low Pass = 1/Time Constant.

Can the Pole Frequency of STC Networks for Low-Pass be negative?

No, the Pole Frequency of STC Networks for Low-Pass, measured in Frequency cannot be negative.

Which unit is used to measure Pole Frequency of STC Networks for Low-Pass?

Pole Frequency of STC Networks for Low-Pass is usually measured using the Hertz[Hz] for Frequency. Petahertz[Hz], Terahertz[Hz], Gigahertz[Hz] are the few other units in which Pole Frequency of STC Networks for Low-Pass can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit