Plate Thickness for given Transverse Shrinkage in Butt Joints Formula

Fx Copy
LaTeX Copy
Plate Thickness in Butt Joint is the distance through the bearing plate that are welded face to face at the thinner end. Check FAQs
ptb=5.08AwSb-(1.27d)
ptb - Plate Thickness in Butt Joint?Aw - Cross Sectional Area of Weld?Sb - Transverse Shrinkage of Butt Joint?d - Root Opening?

Plate Thickness for given Transverse Shrinkage in Butt Joints Example

With values
With units
Only example

Here is how the Plate Thickness for given Transverse Shrinkage in Butt Joints equation looks like with Values.

Here is how the Plate Thickness for given Transverse Shrinkage in Butt Joints equation looks like with Units.

Here is how the Plate Thickness for given Transverse Shrinkage in Butt Joints equation looks like.

802.8736Edit=5.085.5Edit0.365Edit-(1.270.26Edit)
You are here -
HomeIcon Home » Category Engineering » Category Production Engineering » Category Welding » fx Plate Thickness for given Transverse Shrinkage in Butt Joints

Plate Thickness for given Transverse Shrinkage in Butt Joints Solution

Follow our step by step solution on how to calculate Plate Thickness for given Transverse Shrinkage in Butt Joints?

FIRST Step Consider the formula
ptb=5.08AwSb-(1.27d)
Next Step Substitute values of Variables
ptb=5.085.5mm²0.365mm-(1.270.26mm)
Next Step Convert Units
ptb=5.085.5E-60.0004m-(1.270.0003m)
Next Step Prepare to Evaluate
ptb=5.085.5E-60.0004-(1.270.0003)
Next Step Evaluate
ptb=0.80287356321839m
Next Step Convert to Output's Unit
ptb=802.87356321839mm
LAST Step Rounding Answer
ptb=802.8736mm

Plate Thickness for given Transverse Shrinkage in Butt Joints Formula Elements

Variables
Plate Thickness in Butt Joint
Plate Thickness in Butt Joint is the distance through the bearing plate that are welded face to face at the thinner end.
Symbol: ptb
Measurement: LengthUnit: mm
Note: Value should be greater than 0.
Cross Sectional Area of Weld
Cross Sectional Area of Weld is the area of region where welding is being done.
Symbol: Aw
Measurement: AreaUnit: mm²
Note: Value should be greater than 0.
Transverse Shrinkage of Butt Joint
Transverse Shrinkage of Butt Joint is a shrinkage of the metal result of contraction of the base metal after the metal pieces are welded face to face at the thinner end.
Symbol: Sb
Measurement: LengthUnit: mm
Note: Value should be greater than 0.
Root Opening
Root Opening is defined as the point at which the two pieces to be joined by welding is nearest.
Symbol: d
Measurement: LengthUnit: mm
Note: Value should be greater than 0.

Other formulas in Butt Joints category

​Go Transverse Shrinkage in Butt Joints
Sb=(5.08(Awptb))+(1.27d)
​Go Cross-sectional area of weld for given transverse shrinkage in butt joints
Aw=ptb(Sb-1.27d)5.08
​Go Total Transverse Shrinkage during Multi-Pass Welding of Butt Joint
St=S0+b(log10(ww0))
​Go Transverse Shrinkage of Restrained Joint
s=S1+0.086ks0.87

How to Evaluate Plate Thickness for given Transverse Shrinkage in Butt Joints?

Plate Thickness for given Transverse Shrinkage in Butt Joints evaluator uses Plate Thickness in Butt Joint = (5.08*Cross Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening)) to evaluate the Plate Thickness in Butt Joint, The Plate Thickness for given Transverse Shrinkage in Butt Joints formula is defined as that plate thickness which results in given shrinkage of butt joint. Plate Thickness in Butt Joint is denoted by ptb symbol.

How to evaluate Plate Thickness for given Transverse Shrinkage in Butt Joints using this online evaluator? To use this online evaluator for Plate Thickness for given Transverse Shrinkage in Butt Joints, enter Cross Sectional Area of Weld (Aw), Transverse Shrinkage of Butt Joint (Sb) & Root Opening (d) and hit the calculate button.

FAQs on Plate Thickness for given Transverse Shrinkage in Butt Joints

What is the formula to find Plate Thickness for given Transverse Shrinkage in Butt Joints?
The formula of Plate Thickness for given Transverse Shrinkage in Butt Joints is expressed as Plate Thickness in Butt Joint = (5.08*Cross Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening)). Here is an example- 802873.6 = (5.08*5.5E-06)/(0.000365-(1.27*0.00026)).
How to calculate Plate Thickness for given Transverse Shrinkage in Butt Joints?
With Cross Sectional Area of Weld (Aw), Transverse Shrinkage of Butt Joint (Sb) & Root Opening (d) we can find Plate Thickness for given Transverse Shrinkage in Butt Joints using the formula - Plate Thickness in Butt Joint = (5.08*Cross Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening)).
Can the Plate Thickness for given Transverse Shrinkage in Butt Joints be negative?
No, the Plate Thickness for given Transverse Shrinkage in Butt Joints, measured in Length cannot be negative.
Which unit is used to measure Plate Thickness for given Transverse Shrinkage in Butt Joints?
Plate Thickness for given Transverse Shrinkage in Butt Joints is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Plate Thickness for given Transverse Shrinkage in Butt Joints can be measured.
Copied!