FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Peaking Factor given Capacity of Chlorinator at Peak Flow Formula

Fx Copy

LaTeX Copy

Peaking Factor is the ratio of the maximum flow to the average daily flow in a water system. Check FAQs

f = (\frac{Cl 2}{Q a \cdot 8.34 \cdot D})

f - Peaking Factor?Cl₂ - Chlorine Required?Q_a - Average Flow?D - Dosage?

Peaking Factor given Capacity of Chlorinator at Peak Flow Example

With values

With units

Only example

Here is how the Peaking Factor given Capacity of Chlorinator at Peak Flow equation looks like with Values.

Here is how the Peaking Factor given Capacity of Chlorinator at Peak Flow equation looks like with Units.

Here is how the Peaking Factor given Capacity of Chlorinator at Peak Flow equation looks like.

1.2 = (\frac{10}{2.5 \cdot 8.34 \cdot 0.0046})

1.2 = (\frac{10kg/d}{2.5m³/s \cdot 8.34 \cdot 0.0046mg/L})

1.2 = (\frac{10}{2.5 \cdot 8.34 \cdot 0.0046})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Peaking Factor given Capacity of Chlorinator at Peak Flow

Peaking Factor given Capacity of Chlorinator at Peak Flow Solution

Follow our step by step solution on how to calculate Peaking Factor given Capacity of Chlorinator at Peak Flow?

FIRST Step Consider the formula

f = (\frac{Cl 2}{Q a \cdot 8.34 \cdot D})

Next Step Substitute values of Variables

∴

f = (\frac{10kg/d}{2.5m³/s \cdot 8.34 \cdot 0.0046mg/L})

Next Step Convert Units

∴

f = (\frac{0.0001kg/s}{2.5m³/s \cdot 8.34 \cdot 4.6E-6kg/m³})

Next Step Prepare to Evaluate

∴

f = (\frac{0.0001}{2.5 \cdot 8.34 \cdot 4.6E-6})

Next Step Evaluate

∴

f = 1.19998155292359

LAST Step Rounding Answer

∴

f = 1.2

Peaking Factor given Capacity of Chlorinator at Peak Flow Formula Elements

Variables

Peaking Factor

Peaking Factor is the ratio of the maximum flow to the average daily flow in a water system.

Symbol: f

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Peaking Factor

Chlorine Required

Chlorine Required means pounds of chlorine required per day.

Symbol: Cl₂

Measurement: Mass Flow RateUnit: kg/d

Note: Value should be greater than 0.

Formulas to find Chlorine Required

Average Flow

Average Flow often refers to the average velocity of a fluid over a certain period of time or through a specific area.

Symbol: Q_a

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Average Flow

Dosage

Dosage used to obtain coliform reduction refers to the amount of disinfectant added to the wastewater to achieve the desired level of pathogen reduction or disinfection efficacy.

Symbol: D

Measurement: DensityUnit: mg/L

Note: Value should be greater than 0.

Formulas to find Dosage

Other formulas in Design of a Chlorination System for Wastewater Disinfection category

Go Number of Coliform Organisms at Any Particular Time

N t = N 0 \cdot {(1 + 0.23 \cdot C t \cdot t)}^{- 3}

Go Number of Coliform Organisms at any Initial Time

N 0 = (\frac{N t}{{(1 + 0.23 \cdot C t \cdot t)}^{- 3}})

Go Total Chlorine Residual at Any Particular Time

C t = \frac{{(\frac{N 0}{N t})}^{\frac{1}{3}} - 1}{0.23 \cdot t}

Go Residence Time given Number of Coliform Organisms at Any Particular Time

t = \frac{{(\frac{N 0}{N t})}^{\frac{1}{3}} - 1}{0.23 \cdot C t}

How to Evaluate Peaking Factor given Capacity of Chlorinator at Peak Flow?

Peaking Factor given Capacity of Chlorinator at Peak Flow evaluator uses Peaking Factor = (Chlorine Required/(Average Flow*8.34*Dosage)) to evaluate the Peaking Factor, The Peaking Factor given Capacity of Chlorinator at Peak Flow is defined as the peaking factor when we have prior information of average flow , chlorine required and dosage used to obtain coliform. Peaking Factor is denoted by f symbol.

How to evaluate Peaking Factor given Capacity of Chlorinator at Peak Flow using this online evaluator? To use this online evaluator for Peaking Factor given Capacity of Chlorinator at Peak Flow, enter Chlorine Required (Cl₂), Average Flow (Q_a) & Dosage (D) and hit the calculate button.

FAQs on Peaking Factor given Capacity of Chlorinator at Peak Flow

What is the formula to find Peaking Factor given Capacity of Chlorinator at Peak Flow?

The formula of Peaking Factor given Capacity of Chlorinator at Peak Flow is expressed as Peaking Factor = (Chlorine Required/(Average Flow*8.34*Dosage)). Here is an example- 1.199982 = (0.000115740740740741/(2.5*8.34*4.626E-06)).

How to calculate Peaking Factor given Capacity of Chlorinator at Peak Flow?

With Chlorine Required (Cl₂), Average Flow (Q_a) & Dosage (D) we can find Peaking Factor given Capacity of Chlorinator at Peak Flow using the formula - Peaking Factor = (Chlorine Required/(Average Flow*8.34*Dosage)).

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Peaking Factor given Capacity of Chlorinator at Peak Flow Formula

Peaking Factor given Capacity of Chlorinator at Peak Flow Example

Peaking Factor given Capacity of Chlorinator at Peak Flow Solution

Peaking Factor given Capacity of Chlorinator at Peak Flow Formula Elements

Other formulas in Design of a Chlorination System for Wastewater Disinfection category

How to Evaluate Peaking Factor given Capacity of Chlorinator at Peak Flow?

FAQs on Peaking Factor given Capacity of Chlorinator at Peak Flow

Variable Name