FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Output Power Step down Chopper (Buck Converter) Formula

Fx Copy

LaTeX Copy

Output Power Buck Converter is defined power supplied or delivered to the load terminal of a buck converter. Check FAQs

P out(bu) = \frac{d \cdot {V s}^{2}}{R}

P_out(bu) - Output Power Buck Converter?d - Duty Cycle?V_s - Source Voltage?R - Resistance?

Output Power Step down Chopper (Buck Converter) Example

With values

With units

Only example

Here is how the Output Power Step down Chopper (Buck Converter) equation looks like with Values.

Here is how the Output Power Step down Chopper (Buck Converter) equation looks like with Units.

Here is how the Output Power Step down Chopper (Buck Converter) equation looks like.

132.25 = \frac{0.529 \cdot 100^{2}}{40}

132.25W = \frac{0.529 \cdot {100V}^{2}}{40Ω}

132.25 = \frac{0.529 \cdot 100^{2}}{40}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power Electronics » fx Output Power Step down Chopper (Buck Converter)

Output Power Step down Chopper (Buck Converter) Solution

Follow our step by step solution on how to calculate Output Power Step down Chopper (Buck Converter)?

FIRST Step Consider the formula

P out(bu) = \frac{d \cdot {V s}^{2}}{R}

Next Step Substitute values of Variables

∴

P out(bu) = \frac{0.529 \cdot {100V}^{2}}{40Ω}

Next Step Prepare to Evaluate

∴

P out(bu) = \frac{0.529 \cdot 100^{2}}{40}

LAST Step Evaluate

∴

P out(bu) = 132.25W

Output Power Step down Chopper (Buck Converter) Formula Elements

Variables

Output Power Buck Converter

Output Power Buck Converter is defined power supplied or delivered to the load terminal of a buck converter.

Symbol: P_out(bu)

Measurement: PowerUnit: W

Note: Value can be positive or negative.

Formulas to find Output Power Buck Converter

Duty Cycle

A Duty Cycle or power cycle is the fraction of one period in which a signal or system is active.

Symbol: d

Measurement: NAUnit: Unitless

Note: Value should be less than 1.

Formulas to find Duty Cycle

Source Voltage

Source voltage is defined as the voltage or potential difference of the source which is supplying voltage to the chopper.

Symbol: V_s

Measurement: Electric PotentialUnit: V

Note: Value should be greater than 0.

Formulas to find Source Voltage

Resistance

Resistance is defined as the resistance experienced by either the source or load connected to the circuit.

Symbol: R

Measurement: Electric ResistanceUnit: Ω

Note: Value should be greater than 0.

Formulas to find Resistance

Other formulas in Step Up or Step Down Chopper category

Go Average Load Voltage for Step down Chopper (Buck Converter)

V L(bu) = d \cdot V s

Go RMS Load Voltage for Step down Chopper (Buck Converter)

V rms(bu) = \sqrt{d} \cdot V s

Go Average Output Current for Step down Chopper (Buck Converter)

i o(bu) = d \cdot (\frac{V s}{R})

Go Average Load Voltage Step down Chopper (Buck Converter)

V L = f c \cdot T on \cdot V s

How to Evaluate Output Power Step down Chopper (Buck Converter)?

Output Power Step down Chopper (Buck Converter) evaluator uses Output Power Buck Converter = (Duty Cycle*Source Voltage^2)/Resistance to evaluate the Output Power Buck Converter, The Output Power Step down Chopper (Buck Converter) formula is defined as the total power delivered to the load at the output terminal of a Buck Converter. Output Power Buck Converter is denoted by P_out(bu) symbol.

How to evaluate Output Power Step down Chopper (Buck Converter) using this online evaluator? To use this online evaluator for Output Power Step down Chopper (Buck Converter), enter Duty Cycle (d), Source Voltage (V_s) & Resistance (R) and hit the calculate button.

FAQs on Output Power Step down Chopper (Buck Converter)

What is the formula to find Output Power Step down Chopper (Buck Converter)?

The formula of Output Power Step down Chopper (Buck Converter) is expressed as Output Power Buck Converter = (Duty Cycle*Source Voltage^2)/Resistance. Here is an example- 132.25 = (0.529*100^2)/40.

How to calculate Output Power Step down Chopper (Buck Converter)?

With Duty Cycle (d), Source Voltage (V_s) & Resistance (R) we can find Output Power Step down Chopper (Buck Converter) using the formula - Output Power Buck Converter = (Duty Cycle*Source Voltage^2)/Resistance.

Can the Output Power Step down Chopper (Buck Converter) be negative?

Yes, the Output Power Step down Chopper (Buck Converter), measured in Power can be negative.

Which unit is used to measure Output Power Step down Chopper (Buck Converter)?

Output Power Step down Chopper (Buck Converter) is usually measured using the Watt[W] for Power. Kilowatt[W], Milliwatt[W], Microwatt[W] are the few other units in which Output Power Step down Chopper (Buck Converter) can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit