FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Output Frequency in Cyclo Converter Formula

Fx Copy

LaTeX Copy

Output Frequency of a cycloconverter is determined by the firing angle and the input frequency. Check FAQs

f out = \frac{1}{4} \cdot f s

f_out - Output Frequency?f_s - Supply Frequency?

Output Frequency in Cyclo Converter Example

With values

With units

Only example

Here is how the Output Frequency in Cyclo Converter equation looks like with Values.

Here is how the Output Frequency in Cyclo Converter equation looks like with Units.

Here is how the Output Frequency in Cyclo Converter equation looks like.

3.3325 = \frac{1}{4} \cdot 13.33

3.3325Hz = \frac{1}{4} \cdot 13.33Hz

3.3325 = \frac{1}{4} \cdot 13.33

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power Electronics » fx Output Frequency in Cyclo Converter

Output Frequency in Cyclo Converter Solution

Follow our step by step solution on how to calculate Output Frequency in Cyclo Converter?

FIRST Step Consider the formula

f out = \frac{1}{4} \cdot f s

Next Step Substitute values of Variables

∴

f out = \frac{1}{4} \cdot 13.33Hz

Next Step Prepare to Evaluate

∴

f out = \frac{1}{4} \cdot 13.33

LAST Step Evaluate

∴

f out = 3.3325Hz

Output Frequency in Cyclo Converter Formula Elements

Variables

Output Frequency

Output Frequency of a cycloconverter is determined by the firing angle and the input frequency.

Symbol: f_out

Measurement: FrequencyUnit: Hz

Note: Value should be greater than 0.

Formulas to find Output Frequency

Supply Frequency

Supply Frequency is the frequency of the source of AC power to the cycloconverter. It is a crucial parameter that determines the input voltage.

Symbol: f_s

Measurement: FrequencyUnit: Hz

Note: Value should be greater than 0.

Formulas to find Supply Frequency

Other formulas in Cyclo Converters category

Go RMS Value of Output Voltage of Cyclo Converter

V out = \frac{V max}{\sqrt{2}} \cdot {(\frac{1}{π} \cdot (π - α + \frac{\sin (2 \cdot α)}{2}))}^{\frac{1}{2}}

Go Fundamental Output Phase Voltage of Cyclo Converter

V out = V ph \cdot (\frac{t 1}{π}) \cdot \sin (\frac{π}{t 1})

Go Instantaneous Phase Voltage of Cyclo Converter

V i = \sqrt{2} \cdot V ph \cdot \cos (ω \cdot t)

Go Maximum Output DC Voltage in Cyclo Converter

V max = V r \cdot V out

How to Evaluate Output Frequency in Cyclo Converter?

Output Frequency in Cyclo Converter evaluator uses Output Frequency = 1/4*Supply Frequency to evaluate the Output Frequency, Output Frequency in Cyclo Converter is proportional to the input frequency and inversely proportional to the firing angle. This means that increasing the input frequency will also increase the output frequency, and decreasing the firing angle will also increase the output frequency. The output frequency of a cycloconverter can be either lower or higher than the input frequency. This makes cycloconverters useful for a variety of applications, such as variable-speed AC motor drives and static frequency changers. In a variable-speed AC motor drive, the output frequency of the cycloconverter is used to control the speed of the motor. By varying the output frequency, the speed of the motor can be increased or decreased. In a static frequency changer, the output frequency of the cycloconverter is used to convert AC power from one frequency to another. This can be useful for applications where AC power is available at one frequency but is needed at another frequency. Output Frequency is denoted by f_out symbol.

How to evaluate Output Frequency in Cyclo Converter using this online evaluator? To use this online evaluator for Output Frequency in Cyclo Converter, enter Supply Frequency (f_s) and hit the calculate button.

FAQs on Output Frequency in Cyclo Converter

What is the formula to find Output Frequency in Cyclo Converter?

The formula of Output Frequency in Cyclo Converter is expressed as Output Frequency = 1/4*Supply Frequency. Here is an example- 3.3325 = 1/4*13.33.

How to calculate Output Frequency in Cyclo Converter?

With Supply Frequency (f_s) we can find Output Frequency in Cyclo Converter using the formula - Output Frequency = 1/4*Supply Frequency.

Can the Output Frequency in Cyclo Converter be negative?

No, the Output Frequency in Cyclo Converter, measured in Frequency cannot be negative.

Which unit is used to measure Output Frequency in Cyclo Converter?

Output Frequency in Cyclo Converter is usually measured using the Hertz[Hz] for Frequency. Petahertz[Hz], Terahertz[Hz], Gigahertz[Hz] are the few other units in which Output Frequency in Cyclo Converter can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit