FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Outlet Pressure in Terms of Pumping Power Formula

Fx Copy

LaTeX Copy

The Outlet Pressure for Bearing is defined as the pressure outside the bearing. Check FAQs

P o = P i - (\frac{kW p}{Q sb})

P_o - Outlet Pressure for Bearing?P_i - Inlet Pressure for Bearing?kW_p - Pumping Power for Bearing?Q_sb - Flow of lubricant from step bearing?

Outlet Pressure in Terms of Pumping Power Example

With values

With units

Only example

Here is how the Outlet Pressure in Terms of Pumping Power equation looks like with Values.

Here is how the Outlet Pressure in Terms of Pumping Power equation looks like with Units.

Here is how the Outlet Pressure in Terms of Pumping Power equation looks like.

1.1375 = 5.2 - (\frac{1.95}{480000})

1.1375MPa = 5.2MPa - (\frac{1.95kW}{480000mm³/s})

1.1375 = 5.2 - (\frac{1.95}{480000})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Mechanical » Category

Machine Design » fx Outlet Pressure in Terms of Pumping Power

Outlet Pressure in Terms of Pumping Power Solution

Follow our step by step solution on how to calculate Outlet Pressure in Terms of Pumping Power?

FIRST Step Consider the formula

P o = P i - (\frac{kW p}{Q sb})

Next Step Substitute values of Variables

∴

P o = 5.2MPa - (\frac{1.95kW}{480000mm³/s})

Next Step Convert Units

∴

P o = 5.2E+6Pa - (\frac{1950W}{0.0005m³/s})

Next Step Prepare to Evaluate

∴

P o = 5.2E+6 - (\frac{1950}{0.0005})

Next Step Evaluate

∴

P o = 1137500Pa

LAST Step Convert to Output's Unit

∴

P o = 1.1375MPa

Outlet Pressure in Terms of Pumping Power Formula Elements

Variables

Outlet Pressure for Bearing

The Outlet Pressure for Bearing is defined as the pressure outside the bearing.

Symbol: P_o

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Outlet Pressure for Bearing

Inlet Pressure for Bearing

The Inlet Pressure for Bearing is defined as the pressure at the inlet or inside the bearing.

Symbol: P_i

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Inlet Pressure for Bearing

Pumping Power for Bearing

The Pumping Power for Bearing is defined as the product of the flow of lubricant and the difference between inlet and outlet pressure.

Symbol: kW_p

Measurement: PowerUnit: kW

Note: Value should be greater than 0.

Formulas to find Pumping Power for Bearing

Flow of lubricant from step bearing

Flow of lubricant from step bearing can be defined as the amount of lubricant flowing per unit time between two moving surfaces to reduce the friction between them.

Symbol: Q_sb

Measurement: Volumetric Flow RateUnit: mm³/s

Note: Value should be greater than 0.

Formulas to find Flow of lubricant from step bearing

Other formulas in Pressure category

Go Unit Bearing Pressure in Terms of Sommerfeld Number of Bearing

p = \frac{({(\frac{r}{c})}^{2}) \cdot μ l \cdot n s}{2 \cdot π \cdot S}

Go Unit Bearing Pressure in Terms of Radial Load Acting on Bearing

p = \frac{W r}{l a \cdot d}

Go Unit Bearing Pressure in Terms of Temperature Rise Variable

p = ρ \cdot C p \cdot \frac{Δt r}{TRV}

Go Pressure Difference in Terms of Flow of Lubricant

ΔP = l \cdot 12 \cdot μ l \cdot \frac{Q slot}{(h^{3}) \cdot b}

How to Evaluate Outlet Pressure in Terms of Pumping Power?

Outlet Pressure in Terms of Pumping Power evaluator uses Outlet Pressure for Bearing = Inlet Pressure for Bearing-(Pumping Power for Bearing/Flow of lubricant from step bearing) to evaluate the Outlet Pressure for Bearing, The Outlet Pressure in Terms of Pumping Power formula is defined as the difference between inlet pressure and the ratio of pumping power to flow of lubricant. Outlet Pressure for Bearing is denoted by P_o symbol.

How to evaluate Outlet Pressure in Terms of Pumping Power using this online evaluator? To use this online evaluator for Outlet Pressure in Terms of Pumping Power, enter Inlet Pressure for Bearing (P_i), Pumping Power for Bearing (kW_p) & Flow of lubricant from step bearing (Q_sb) and hit the calculate button.

FAQs on Outlet Pressure in Terms of Pumping Power

What is the formula to find Outlet Pressure in Terms of Pumping Power?

The formula of Outlet Pressure in Terms of Pumping Power is expressed as Outlet Pressure for Bearing = Inlet Pressure for Bearing-(Pumping Power for Bearing/Flow of lubricant from step bearing). Here is an example- 1.1E-6 = 5200000-(1950/0.00048).

How to calculate Outlet Pressure in Terms of Pumping Power?

With Inlet Pressure for Bearing (P_i), Pumping Power for Bearing (kW_p) & Flow of lubricant from step bearing (Q_sb) we can find Outlet Pressure in Terms of Pumping Power using the formula - Outlet Pressure for Bearing = Inlet Pressure for Bearing-(Pumping Power for Bearing/Flow of lubricant from step bearing).

Can the Outlet Pressure in Terms of Pumping Power be negative?

No, the Outlet Pressure in Terms of Pumping Power, measured in Pressure cannot be negative.

Which unit is used to measure Outlet Pressure in Terms of Pumping Power?

Outlet Pressure in Terms of Pumping Power is usually measured using the Megapascal[MPa] for Pressure. Pascal[MPa], Kilopascal[MPa], Bar[MPa] are the few other units in which Outlet Pressure in Terms of Pumping Power can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Outlet Pressure in Terms of Pumping Power Formula

Outlet Pressure in Terms of Pumping Power Example

Outlet Pressure in Terms of Pumping Power Solution

Outlet Pressure in Terms of Pumping Power Formula Elements

Other formulas in Pressure category

How to Evaluate Outlet Pressure in Terms of Pumping Power?

FAQs on Outlet Pressure in Terms of Pumping Power

Variable Name