FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Nose Radius of Tool from Surface Finish Constraint Formula

Fx Copy

LaTeX Copy

Nose Radius is any of the line segments from its center to its perimeter, and in more modern usage, it is also their length. Check FAQs

r nose = \frac{0.0321}{C}

r_nose - Nose Radius?C - Feed Constraint?

Nose Radius of Tool from Surface Finish Constraint Example

With values

With units

Only example

Here is how the Nose Radius of Tool from Surface Finish Constraint equation looks like with Values.

Here is how the Nose Radius of Tool from Surface Finish Constraint equation looks like with Units.

Here is how the Nose Radius of Tool from Surface Finish Constraint equation looks like.

0.107 = \frac{0.0321}{0.3}

0.107m = \frac{0.0321}{0.3m⁻¹}

0.107 = \frac{0.0321}{0.3}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Cutting » fx Nose Radius of Tool from Surface Finish Constraint

Nose Radius of Tool from Surface Finish Constraint Solution

Follow our step by step solution on how to calculate Nose Radius of Tool from Surface Finish Constraint?

FIRST Step Consider the formula

r nose = \frac{0.0321}{C}

Next Step Substitute values of Variables

∴

r nose = \frac{0.0321}{0.3m⁻¹}

Next Step Prepare to Evaluate

∴

r nose = \frac{0.0321}{0.3}

LAST Step Evaluate

∴

r nose = 0.107m

Nose Radius of Tool from Surface Finish Constraint Formula Elements

Variables

Nose Radius

Nose Radius is any of the line segments from its center to its perimeter, and in more modern usage, it is also their length.

Symbol: r_nose

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Nose Radius

Feed Constraint

feed constraint rate refers to the distance that the cutting tool advances along the workpiece per revolution of the workpiece or per tooth of the tool in milling.

Symbol: C

Measurement: Reciprocal LengthUnit: m⁻¹

Note: Value should be greater than 0.

Formulas to find Feed Constraint

Other formulas in Mechanics of Orthogonal Cutting category

Go Cutting Speed given Spindle Speed

V = π \cdot D \cdot N

Go Machining Time given Spindle Speed

t = \frac{L}{f \cdot N}

Go Machining Time given Cutting Speed

t = \frac{π \cdot D \cdot L}{f \cdot V}

Go Surface Finish Constraint

C = \frac{0.0321}{r nose}

How to Evaluate Nose Radius of Tool from Surface Finish Constraint?

Nose Radius of Tool from Surface Finish Constraint evaluator uses Nose Radius = 0.0321/Feed Constraint to evaluate the Nose Radius, Nose radius of tool from surface finish constraint is defined as the radius provided at the tool tip so that it does not break due to stress concentrations. Nose Radius is denoted by r_nose symbol.

How to evaluate Nose Radius of Tool from Surface Finish Constraint using this online evaluator? To use this online evaluator for Nose Radius of Tool from Surface Finish Constraint, enter Feed Constraint (C) and hit the calculate button.

FAQs on Nose Radius of Tool from Surface Finish Constraint

What is the formula to find Nose Radius of Tool from Surface Finish Constraint?

The formula of Nose Radius of Tool from Surface Finish Constraint is expressed as Nose Radius = 0.0321/Feed Constraint. Here is an example- 0.107 = 0.0321/0.3.

How to calculate Nose Radius of Tool from Surface Finish Constraint?

With Feed Constraint (C) we can find Nose Radius of Tool from Surface Finish Constraint using the formula - Nose Radius = 0.0321/Feed Constraint.

Can the Nose Radius of Tool from Surface Finish Constraint be negative?

No, the Nose Radius of Tool from Surface Finish Constraint, measured in Length cannot be negative.

Which unit is used to measure Nose Radius of Tool from Surface Finish Constraint?

Nose Radius of Tool from Surface Finish Constraint is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Nose Radius of Tool from Surface Finish Constraint can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit