FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress Formula

GoNormal Stress across Oblique Section Formula

GoNormal Stress for Principal Planes at Angle of 90 degrees Formula

Fx Copy

LaTeX Copy

Normal Stress is stress that occurs when a member is loaded by an axial force. Check FAQs

σ n = \frac{σ 1 + σ 2}{2} + \frac{σ 1 - σ 2}{2}

σ_n - Normal Stress?σ₁ - Major Tensile Stress?σ₂ - Minor Tensile Stress?

Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress Example

With values

With units

Only example

Here is how the Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress equation looks like with Values.

Here is how the Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress equation looks like with Units.

Here is how the Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress equation looks like.

1.2E-13 = \frac{1.2E-7 + 11196}{2} + \frac{1.2E-7 - 11196}{2}

1.2E-13MPa = \frac{1.2E-7N/m² + 11196N/m²}{2} + \frac{1.2E-7N/m² - 11196N/m²}{2}

1.2E-13 = \frac{1.2E-7 + 11196}{2} + \frac{1.2E-7 - 11196}{2}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress

Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress Solution

Follow our step by step solution on how to calculate Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress?

FIRST Step Consider the formula

σ n = \frac{σ 1 + σ 2}{2} + \frac{σ 1 - σ 2}{2}

Next Step Substitute values of Variables

∴

σ n = \frac{1.2E-7N/m² + 11196N/m²}{2} + \frac{1.2E-7N/m² - 11196N/m²}{2}

Next Step Convert Units

∴

σ n = \frac{1.2E-7Pa + 11196Pa}{2} + \frac{1.2E-7Pa - 11196Pa}{2}

Next Step Prepare to Evaluate

∴

σ n = \frac{1.2E-7 + 11196}{2} + \frac{1.2E-7 - 11196}{2}

Next Step Evaluate

∴

σ n = 1.24000507639721E-07Pa

Next Step Convert to Output's Unit

∴

σ n = 1.24000507639721E-13MPa

LAST Step Rounding Answer

∴

σ n = 1.2E-13MPa

Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress Formula Elements

Variables

Normal Stress

Normal Stress is stress that occurs when a member is loaded by an axial force.

Symbol: σ_n

Measurement: StressUnit: MPa

Note: Value should be greater than 0.

Formulas to find Normal Stress

Major Tensile Stress

Major Tensile Stress is the stress acting along the longitudinal direction.

Symbol: σ₁

Measurement: PressureUnit: N/m²

Note: Value can be positive or negative.

Formulas to find Major Tensile Stress

Minor Tensile Stress

Minor Tensile Stress is the stress acting along lateral direction.

Symbol: σ₂

Measurement: PressureUnit: N/m²

Note: Value can be positive or negative.

Formulas to find Minor Tensile Stress

Other Formulas to find Normal Stress

Go Normal Stress across Oblique Section

σ n = σ \cdot {(\cos (θ o))}^{2}

Go Normal Stress for Principal Planes at Angle of 90 degrees

σ n = \frac{σ 1 + σ 2}{2} - \frac{σ 1 - σ 2}{2}

Go Normal Stress for Principal Planes when Planes are at Angle of 0 Degree

σ n = \frac{σ 1 + σ 2}{2} + \frac{σ 1 - σ 2}{2}

Go Normal Stress on Oblique Section given Stress in Perpendicular Directions

σ n = \frac{σ 1 + σ 2}{2} + \frac{σ 1 - σ 2}{2} \cdot \cos (2 \cdot θ o)

Other formulas in Normal Stress category

Go Equivalent Stress by Distortion Energy Theory

σ e = \frac{1}{\sqrt{2}} \cdot \sqrt{{(σ' 1 - σ' 2)}^{2} + {(σ' 2 - σ 3)}^{2} + {(σ 3 - σ' 1)}^{2}}

Go Stress Amplitude

σ a = \frac{σ max - σ min}{2}

How to Evaluate Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress?

Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress evaluator uses Normal Stress = (Major Tensile Stress+Minor Tensile Stress)/2+(Major Tensile Stress-Minor Tensile Stress)/2 to evaluate the Normal Stress, Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress formula is defined as a measure of the stress on a material at a 0-degree angle, providing insight into the material's behavior under different types of stress, particularly major and minor tensile stress. Normal Stress is denoted by σ_n symbol.

How to evaluate Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress using this online evaluator? To use this online evaluator for Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress, enter Major Tensile Stress (σ₁) & Minor Tensile Stress (σ₂) and hit the calculate button.

FAQs on Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress

What is the formula to find Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress?

The formula of Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress is expressed as Normal Stress = (Major Tensile Stress+Minor Tensile Stress)/2+(Major Tensile Stress-Minor Tensile Stress)/2. Here is an example- 1.2E-19 = (1.24E-07+11196)/2+(1.24E-07-11196)/2.

How to calculate Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress?

With Major Tensile Stress (σ₁) & Minor Tensile Stress (σ₂) we can find Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress using the formula - Normal Stress = (Major Tensile Stress+Minor Tensile Stress)/2+(Major Tensile Stress-Minor Tensile Stress)/2.

What are the other ways to Calculate Normal Stress?

Here are the different ways to Calculate Normal Stress-

Normal Stress=Stress in Bar*(cos(Angle Made By Oblique Section With Normal))^2
Normal Stress=(Major Tensile Stress+Minor Tensile Stress)/2-(Major Tensile Stress-Minor Tensile Stress)/2
Normal Stress=(Major Tensile Stress+Minor Tensile Stress)/2+(Major Tensile Stress-Minor Tensile Stress)/2

Can the Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress be negative?

No, the Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress, measured in Stress cannot be negative.

Which unit is used to measure Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress?

Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress is usually measured using the Megapascal[MPa] for Stress. Pascal[MPa], Newton per Square Meter[MPa], Newton per Square Millimeter[MPa] are the few other units in which Normal Stress for Principal Planes at Angle of 0 Degrees given Major and Minor Tensile Stress can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!