FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Formula

Fx Copy

LaTeX Copy

The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications. Check FAQs

σ o = \frac{P}{(w - d h) \cdot t}

σ_o - Nominal Stress?P - Load on Flat Plate?w - Width of Plate?d_h - Diameter of Transverse Hole in Plate?t - Thickness of Plate?

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Example

With values

With units

Only example

Here is how the Nominal Tensile Stress in Rectangular Plate with Transverse Hole equation looks like with Values.

Here is how the Nominal Tensile Stress in Rectangular Plate with Transverse Hole equation looks like with Units.

Here is how the Nominal Tensile Stress in Rectangular Plate with Transverse Hole equation looks like.

25.0071 = \frac{8750}{(70 - 35.01) \cdot 10}

25.0071N/mm² = \frac{8750N}{(70mm - 35.01mm) \cdot 10mm}

25.0071 = \frac{8750}{(70 - 35.01) \cdot 10}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Mechanical » Category

Machine Design » fx Nominal Tensile Stress in Rectangular Plate with Transverse Hole

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Solution

Follow our step by step solution on how to calculate Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

FIRST Step Consider the formula

σ o = \frac{P}{(w - d h) \cdot t}

Next Step Substitute values of Variables

∴

σ o = \frac{8750N}{(70mm - 35.01mm) \cdot 10mm}

Next Step Convert Units

∴

σ o = \frac{8750N}{(0.07m - 0.035m) \cdot 0.01m}

Next Step Prepare to Evaluate

∴

σ o = \frac{8750}{(0.07 - 0.035) \cdot 0.01}

Next Step Evaluate

∴

σ o = 25007144.8985424Pa

Next Step Convert to Output's Unit

∴

σ o = 25.0071448985424N/mm²

LAST Step Rounding Answer

∴

σ o = 25.0071N/mm²

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Formula Elements

Variables

Nominal Stress

The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.

Symbol: σ_o

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Nominal Stress

Load on Flat Plate

The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions.

Symbol: P

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Load on Flat Plate

Width of Plate

The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications.

Symbol: w

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Width of Plate

Diameter of Transverse Hole in Plate

The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity.

Symbol: d_h

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Transverse Hole in Plate

Thickness of Plate

The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.

Symbol: t

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Other formulas in Rectangular Plate against Fluctuating Loads category

Go Highest Value of Actual Stress near Discontinuity

σa max = k f \cdot σ o

Go Load on Rectangular Plate with Transverse Hole given Nominal Stress

P = σ o \cdot (w - d h) \cdot t

Go Width of Rectangular Plate with Transverse Hole given Nominal Stress

w = \frac{P}{t \cdot σ o} + d h

Go Diameter of Transverse Hole of Rectangular Plate with Stress Concentration given Nominal Stress

d h = w - \frac{P}{t \cdot σ o}

How to Evaluate Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

Nominal Tensile Stress in Rectangular Plate with Transverse Hole evaluator uses Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate) to evaluate the Nominal Stress, The Nominal Tensile Stress in Rectangular plate with Transverse hole is the tensile stress obtained by elementary equations for a minimum cross-section of a rectangular plate with a transverse hole. Nominal Stress is denoted by σ_o symbol.

How to evaluate Nominal Tensile Stress in Rectangular Plate with Transverse Hole using this online evaluator? To use this online evaluator for Nominal Tensile Stress in Rectangular Plate with Transverse Hole, enter Load on Flat Plate (P), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Thickness of Plate (t) and hit the calculate button.

FAQs on Nominal Tensile Stress in Rectangular Plate with Transverse Hole

What is the formula to find Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

The formula of Nominal Tensile Stress in Rectangular Plate with Transverse Hole is expressed as Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate). Here is an example- 2.5E-5 = 8750/((0.07-0.03501)*0.01).

How to calculate Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

With Load on Flat Plate (P), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Thickness of Plate (t) we can find Nominal Tensile Stress in Rectangular Plate with Transverse Hole using the formula - Nominal Stress = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Thickness of Plate).

Can the Nominal Tensile Stress in Rectangular Plate with Transverse Hole be negative?

No, the Nominal Tensile Stress in Rectangular Plate with Transverse Hole, measured in Stress cannot be negative.

Which unit is used to measure Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

Nominal Tensile Stress in Rectangular Plate with Transverse Hole is usually measured using the Newton per Square Millimeter[N/mm²] for Stress. Pascal[N/mm²], Newton per Square Meter[N/mm²], Kilonewton per Square Meter[N/mm²] are the few other units in which Nominal Tensile Stress in Rectangular Plate with Transverse Hole can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Formula

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Example

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Solution

Nominal Tensile Stress in Rectangular Plate with Transverse Hole Formula Elements

Other formulas in Rectangular Plate against Fluctuating Loads category

How to Evaluate Nominal Tensile Stress in Rectangular Plate with Transverse Hole?

FAQs on Nominal Tensile Stress in Rectangular Plate with Transverse Hole

Variable Name