FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Negative Moment at Other Faces of Interior Supports Formula

GoPositive Moment for End Spans if Discontinuous End is Unrestrained Formula

GoPositive Moment for End Spans if Discontinuous End is Integral with Support Formula

Fx Copy

LaTeX Copy

The Moment in Structures is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member. Check FAQs

M t = \frac{W load \cdot {I n}^{2}}{11}

M_t - Moment in Structures?W_load - Vertical Load?I_n - Length of Span?

Negative Moment at Other Faces of Interior Supports Example

With values

With units

Only example

Here is how the Negative Moment at Other Faces of Interior Supports equation looks like with Values.

Here is how the Negative Moment at Other Faces of Interior Supports equation looks like with Units.

Here is how the Negative Moment at Other Faces of Interior Supports equation looks like.

32.7928 = \frac{3.6 \cdot {10.01}^{2}}{11}

32.7928N*m = \frac{3.6kN \cdot {10.01m}^{2}}{11}

32.7928 = \frac{3.6 \cdot {10.01}^{2}}{11}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Structural Engineering » fx Negative Moment at Other Faces of Interior Supports

Negative Moment at Other Faces of Interior Supports Solution

Follow our step by step solution on how to calculate Negative Moment at Other Faces of Interior Supports?

FIRST Step Consider the formula

M t = \frac{W load \cdot {I n}^{2}}{11}

Next Step Substitute values of Variables

∴

M t = \frac{3.6kN \cdot {10.01m}^{2}}{11}

Next Step Prepare to Evaluate

∴

M t = \frac{3.6 \cdot {10.01}^{2}}{11}

Next Step Evaluate

∴

M t = 32.79276J

Next Step Convert to Output's Unit

∴

M t = 32.79276N*m

LAST Step Rounding Answer

∴

M t = 32.7928N*m

Negative Moment at Other Faces of Interior Supports Formula Elements

Variables

Moment in Structures

The Moment in Structures is an overturning effect (tends to bend or turn the member) created by the force(load) acting on a structural member.

Symbol: M_t

Measurement: EnergyUnit: N*m

Note: Value should be greater than 0.

Formulas to find Moment in Structures

Vertical Load

Vertical Load are applied perpendicular to the surface.

Symbol: W_load

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Vertical Load

Length of Span

Length of Span refers to the length of the opening above which the beam is spanning.

Symbol: I_n

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length of Span

Other Formulas to find Moment in Structures

Go Positive Moment for End Spans if Discontinuous End is Unrestrained

M t = \frac{W load \cdot {I n}^{2}}{11}

Go Positive Moment for End Spans if Discontinuous End is Integral with Support

M t = \frac{W load \cdot {I n}^{2}}{14}

Go Positive Moment for Interior Spans

M t = \frac{W load \cdot {I n}^{2}}{16}

Go Negative Moment at Exterior Face of First Interior Support for Two Spans

M t = \frac{W load \cdot {I n}^{2}}{9}

How to Evaluate Negative Moment at Other Faces of Interior Supports?

Negative Moment at Other Faces of Interior Supports evaluator uses Moment in Structures = (Vertical Load*Length of Span^2)/11 to evaluate the Moment in Structures, The Negative Moment at Other Faces of Interior Supports is defined as the beam is forced to curve up (forming a frown) above supports. Moment in Structures is denoted by M_t symbol.

How to evaluate Negative Moment at Other Faces of Interior Supports using this online evaluator? To use this online evaluator for Negative Moment at Other Faces of Interior Supports, enter Vertical Load (W_load) & Length of Span (I_n) and hit the calculate button.

FAQs on Negative Moment at Other Faces of Interior Supports

What is the formula to find Negative Moment at Other Faces of Interior Supports?

The formula of Negative Moment at Other Faces of Interior Supports is expressed as Moment in Structures = (Vertical Load*Length of Span^2)/11. Here is an example- 0.032727 = (3600*0.01001^2)/11.

How to calculate Negative Moment at Other Faces of Interior Supports?

With Vertical Load (W_load) & Length of Span (I_n) we can find Negative Moment at Other Faces of Interior Supports using the formula - Moment in Structures = (Vertical Load*Length of Span^2)/11.

What are the other ways to Calculate Moment in Structures?

Here are the different ways to Calculate Moment in Structures-

Moment in Structures=(Vertical Load*Length of Span^2)/11
Moment in Structures=(Vertical Load*Length of Span^2)/14
Moment in Structures=(Vertical Load*Length of Span^2)/16

Can the Negative Moment at Other Faces of Interior Supports be negative?

No, the Negative Moment at Other Faces of Interior Supports, measured in Energy cannot be negative.

Which unit is used to measure Negative Moment at Other Faces of Interior Supports?

Negative Moment at Other Faces of Interior Supports is usually measured using the Newton Meter[N*m] for Energy. Joule[N*m], Kilojoule[N*m], Gigajoule[N*m] are the few other units in which Negative Moment at Other Faces of Interior Supports can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Negative Moment at Other Faces of Interior Supports Formula

​GoPositive Moment for End Spans if Discontinuous End is Unrestrained Formula

​GoPositive Moment for End Spans if Discontinuous End is Integral with Support Formula

Negative Moment at Other Faces of Interior Supports Example

Negative Moment at Other Faces of Interior Supports Solution

Negative Moment at Other Faces of Interior Supports Formula Elements

Other Formulas to find Moment in Structures

How to Evaluate Negative Moment at Other Faces of Interior Supports?

FAQs on Negative Moment at Other Faces of Interior Supports

Variable Name

GoPositive Moment for End Spans if Discontinuous End is Unrestrained Formula

GoPositive Moment for End Spans if Discontinuous End is Integral with Support Formula