FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A Formula

GoMolar Flux of Diffusing Component A for Equimolar Diffusion with B based on Mole Fraction of A Formula

GoMolar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A Formula

Fx Copy

LaTeX Copy

Molar Flux of Diffusing Component A is the amount of substance per unit area per unit time. Check FAQs

N a = (\frac{D \cdot P t}{δ}) \cdot (\frac{C a1 - C a2}{P b})

N_a - Molar Flux of Diffusing Component A?D - Diffusion Coefficient (DAB)?P_t - Total Pressure of Gas?δ - Film Thickness?C_a1 - Concentration of Component A in 1?C_a2 - Concentration of Component A in 2?P_b - Log Mean Partial Pressure of B?

Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A Example

With values

With units

Only example

Here is how the Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A equation looks like with Values.

Here is how the Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A equation looks like with Units.

Here is how the Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A equation looks like.

41.4492 = (\frac{0.007 \cdot 400000}{0.005}) \cdot (\frac{0.2075 - 0.2}{101300})

41.4492mol/s*m² = (\frac{0.007m²/s \cdot 400000Pa}{0.005m}) \cdot (\frac{0.2075mol/L - 0.2mol/L}{101300Pa})

41.4492 = (\frac{0.007 \cdot 400000}{0.005}) \cdot (\frac{0.2075 - 0.2}{101300})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Heat and Mass Transfer » fx Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A

Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A Solution

Follow our step by step solution on how to calculate Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A?

FIRST Step Consider the formula

N a = (\frac{D \cdot P t}{δ}) \cdot (\frac{C a1 - C a2}{P b})

Next Step Substitute values of Variables

∴

N a = (\frac{0.007m²/s \cdot 400000Pa}{0.005m}) \cdot (\frac{0.2075mol/L - 0.2mol/L}{101300Pa})

Next Step Convert Units

∴

N a = (\frac{0.007m²/s \cdot 400000Pa}{0.005m}) \cdot (\frac{207.4979mol/m³ - 200mol/m³}{101300Pa})

Next Step Prepare to Evaluate

∴

N a = (\frac{0.007 \cdot 400000}{0.005}) \cdot (\frac{207.4979 - 200}{101300})

Next Step Evaluate

∴

N a = 41.4491645409674mol/s*m²

LAST Step Rounding Answer

∴

N a = 41.4492mol/s*m²

Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A Formula Elements

Variables

Molar Flux of Diffusing Component A

Molar Flux of Diffusing Component A is the amount of substance per unit area per unit time.

Symbol: N_a

Measurement: Molar Flux of Diffusing ComponentUnit: mol/s*m²

Note: Value can be positive or negative.

Formulas to find Molar Flux of Diffusing Component A

Diffusion Coefficient (DAB)

The Diffusion Coefficient (DAB) is the amount of a particular substance that diffuses across a unit area in 1 second under the influence of a gradient of one unit.

Symbol: D

Measurement: DiffusivityUnit: m²/s

Note: Value should be greater than 0.

Formulas to find Diffusion Coefficient (DAB)

Total Pressure of Gas

Total Pressure of Gas is the sum of all the forces that the gas molecules exert on the walls of their container.

Symbol: P_t

Measurement: PressureUnit: Pa

Note: Value can be positive or negative.

Formulas to find Total Pressure of Gas

Film Thickness

The Film Thickness is the thickness between the wall or the phase boundary or the interface to the other end of the film.

Symbol: δ

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Film Thickness

Concentration of Component A in 1

The Concentration of Component A in 1 is the variable which measures the molar concentration of component A in the mixture on the feed side of the diffusing component.

Symbol: C_a1

Measurement: Molar ConcentrationUnit: mol/L

Note: Value should be greater than 0.

Formulas to find Concentration of Component A in 1

Concentration of Component A in 2

The Concentration of Component A in 2 is the variable which measures the molar concentration of component A in the mixture on the other side of the diffusing component.

Symbol: C_a2

Measurement: Molar ConcentrationUnit: mol/L

Note: Value should be greater than 0.

Formulas to find Concentration of Component A in 2

Log Mean Partial Pressure of B

The Log Mean Partial Pressure of B is the partial pressure of component B in terms of the logarithmic mean.

Symbol: P_b

Measurement: PressureUnit: Pa

Note: Value should be greater than 0.

Formulas to find Log Mean Partial Pressure of B

Other Formulas to find Molar Flux of Diffusing Component A

Go Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Mole Fraction of A

N a = (\frac{D \cdot P t}{[R] \cdot T \cdot δ}) \cdot (y a1 - y a2)

Go Molar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A

N a = (\frac{D}{[R] \cdot T \cdot δ}) \cdot (P a1 - P a2)

Other formulas in Molar Diffusion category

Go Chapman Enskog Equation for Gas Phase Diffusivity

D AB = \frac{1.858 \cdot (10^{- 7}) \cdot (T^{\frac{3}{2}}) \cdot ({((\frac{1}{M A}) + (\frac{1}{M b}))}^{\frac{1}{2}})}{P T \cdot {σ AB}^{2} \cdot Ω D}

Go Diffusivity by Stefan Tube Method

D AB = \frac{[R] \cdot T \cdot P BLM \cdot ρ L \cdot ({h 1}^{2} - {h 2}^{2})}{2 \cdot P T \cdot M A \cdot (P A1 - P A2) \cdot t}

How to Evaluate Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A?

Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A evaluator uses Molar Flux of Diffusing Component A = ((Diffusion Coefficient (DAB)*Total Pressure of Gas)/(Film Thickness))*((Concentration of Component A in 1-Concentration of Component A in 2)/Log Mean Partial Pressure of B) to evaluate the Molar Flux of Diffusing Component A, Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A is defined as the molar flux between gaseous components A and B when diffusion of diffusing component A takes place with non-diffusing component B. Molar Flux of Diffusing Component A is denoted by N_a symbol.

How to evaluate Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A using this online evaluator? To use this online evaluator for Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A, enter Diffusion Coefficient (DAB) (D), Total Pressure of Gas (P_t), Film Thickness (δ), Concentration of Component A in 1 (C_a1), Concentration of Component A in 2 (C_a2) & Log Mean Partial Pressure of B (P_b) and hit the calculate button.

FAQs on Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A

What is the formula to find Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A?

The formula of Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A is expressed as Molar Flux of Diffusing Component A = ((Diffusion Coefficient (DAB)*Total Pressure of Gas)/(Film Thickness))*((Concentration of Component A in 1-Concentration of Component A in 2)/Log Mean Partial Pressure of B). Here is an example- 0.001554 = ((0.007*400000)/(0.005))*((207.4978578-200)/101300).

How to calculate Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A?

With Diffusion Coefficient (DAB) (D), Total Pressure of Gas (P_t), Film Thickness (δ), Concentration of Component A in 1 (C_a1), Concentration of Component A in 2 (C_a2) & Log Mean Partial Pressure of B (P_b) we can find Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A using the formula - Molar Flux of Diffusing Component A = ((Diffusion Coefficient (DAB)*Total Pressure of Gas)/(Film Thickness))*((Concentration of Component A in 1-Concentration of Component A in 2)/Log Mean Partial Pressure of B).

What are the other ways to Calculate Molar Flux of Diffusing Component A?

Here are the different ways to Calculate Molar Flux of Diffusing Component A-

Molar Flux of Diffusing Component A=((Diffusion Coefficient (DAB)*Total Pressure of Gas)/([R]*Temperature of Gas*Film Thickness))*(Mole Fraction of Component A in 1-Mole Fraction of Component A in 2)
Molar Flux of Diffusing Component A=(Diffusion Coefficient (DAB)/([R]*Temperature of Gas*Film Thickness))*(Partial Pressure of Component A in 1-Partial Pressure of Component A in 2)
Molar Flux of Diffusing Component A=((Diffusion Coefficient (DAB)*Total Pressure of Gas)/([R]*Temperature of Gas*Film Thickness))*((Partial Pressure of Component A in 1-Partial Pressure of Component A in 2)/Log Mean Partial Pressure of B)

Can the Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A be negative?

Yes, the Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A, measured in Molar Flux of Diffusing Component can be negative.

Which unit is used to measure Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A?

Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A is usually measured using the Mole per Second Square Meter[mol/s*m²] for Molar Flux of Diffusing Component. Kilogram Mole per Second Square Meter[mol/s*m²], Millimole per Microsecond Square Meter[mol/s*m²] are the few other units in which Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A Formula

​GoMolar Flux of Diffusing Component A for Equimolar Diffusion with B based on Mole Fraction of A Formula

​GoMolar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A Formula

Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A Example

Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A Solution

Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A Formula Elements

Other Formulas to find Molar Flux of Diffusing Component A

Other formulas in Molar Diffusion category

How to Evaluate Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A?

FAQs on Molar Flux of Diffusing Component A through Non-Diffusing B based on Concentration of A

Variable Name

GoMolar Flux of Diffusing Component A for Equimolar Diffusion with B based on Mole Fraction of A Formula

GoMolar Flux of Diffusing Component A for Equimolar Diffusion with B based on Partial Pressure of A Formula