FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Minimum Stress using Eccentric Load and Eccentricity Formula

GoMinimum Stress Formula

Fx Copy

LaTeX Copy

Minimum Stress Value for fluctuating stress is defined as refers to the minimum compressive stress. Check FAQs

σ min = \frac{P \cdot (1 - (6 \cdot \frac{e load}{b}))}{A sectional}

σ_min - Minimum Stress Value?P - Eccentric Load on Column?e_load - Eccentricity of Loading?b - Width of Column?A_sectional - Column Cross Sectional Area?

Minimum Stress using Eccentric Load and Eccentricity Example

With values

With units

Only example

Here is how the Minimum Stress using Eccentric Load and Eccentricity equation looks like with Values.

Here is how the Minimum Stress using Eccentric Load and Eccentricity equation looks like with Units.

Here is how the Minimum Stress using Eccentric Load and Eccentricity equation looks like.

0.0038 = \frac{7 \cdot (1 - (6 \cdot \frac{25}{600}))}{1.4}

0.0038MPa = \frac{7kN \cdot (1 - (6 \cdot \frac{25mm}{600mm}))}{1.4m²}

0.0038 = \frac{7 \cdot (1 - (6 \cdot \frac{25}{600}))}{1.4}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Minimum Stress using Eccentric Load and Eccentricity

Minimum Stress using Eccentric Load and Eccentricity Solution

Follow our step by step solution on how to calculate Minimum Stress using Eccentric Load and Eccentricity?

FIRST Step Consider the formula

σ min = \frac{P \cdot (1 - (6 \cdot \frac{e load}{b}))}{A sectional}

Next Step Substitute values of Variables

∴

σ min = \frac{7kN \cdot (1 - (6 \cdot \frac{25mm}{600mm}))}{1.4m²}

Next Step Convert Units

∴

σ min = \frac{7000N \cdot (1 - (6 \cdot \frac{0.025m}{0.6m}))}{1.4m²}

Next Step Prepare to Evaluate

∴

σ min = \frac{7000 \cdot (1 - (6 \cdot \frac{0.025}{0.6}))}{1.4}

Next Step Evaluate

∴

σ min = 3750Pa

Next Step Convert to Output's Unit

∴

σ min = 0.00375MPa

LAST Step Rounding Answer

∴

σ min = 0.0038MPa

Minimum Stress using Eccentric Load and Eccentricity Formula Elements

Variables

Minimum Stress Value

Minimum Stress Value for fluctuating stress is defined as refers to the minimum compressive stress.

Symbol: σ_min

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Minimum Stress Value

Eccentric Load on Column

Eccentric Load on Column is the load that causes direct stress as well as bending stress.

Symbol: P

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Eccentric Load on Column

Eccentricity of Loading

Eccentricity of Loading is the distance between the actual line of action of loads and the line of action that would produce a uniform stress over the cross section of the specimen.

Symbol: e_load

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Eccentricity of Loading

Width of Column

Width of Column is describe that how wide the column is.

Symbol: b

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Width of Column

Column Cross Sectional Area

Column Cross Sectional Area is the area of a two-dimensional shape that is obtained when a three dimensional shape is sliced perpendicular to some specified axis at a point.

Symbol: A_sectional

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Column Cross Sectional Area

Other Formulas to find Minimum Stress Value

Go Minimum Stress

σ min = (σ - σ b)

Other formulas in Rectangular Section Is Subjected to Eccentric Load category

Go Eccentricity using Minimum Stress

e load = (1 - (σ min \cdot \frac{A sectional}{P})) \cdot (\frac{b}{6})

Go Eccentric Load using Minimum Stress

P = \frac{σ min \cdot A sectional}{1 - (6 \cdot \frac{e load}{b})}

Go Eccentricity using Maximum Stress

e load = ((σ max \cdot \frac{A sectional}{P}) - 1) \cdot (\frac{b}{6})

Go Eccentric Load using Maximum Stress

P = \frac{σ max \cdot A sectional}{1 + (6 \cdot \frac{e load}{b})}

How to Evaluate Minimum Stress using Eccentric Load and Eccentricity?

Minimum Stress using Eccentric Load and Eccentricity evaluator uses Minimum Stress Value = (Eccentric Load on Column*(1-(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area) to evaluate the Minimum Stress Value, The Minimum Stress using Eccentric Load and Eccentricity formula is defined as a measure of the minimum stress experienced by a material under eccentric loading, taking into account the load's eccentricity and the material's sectional area, to determine the stress concentration and potential failure points. Minimum Stress Value is denoted by σ_min symbol.

How to evaluate Minimum Stress using Eccentric Load and Eccentricity using this online evaluator? To use this online evaluator for Minimum Stress using Eccentric Load and Eccentricity, enter Eccentric Load on Column (P), Eccentricity of Loading (e_load), Width of Column (b) & Column Cross Sectional Area (A_sectional) and hit the calculate button.

FAQs on Minimum Stress using Eccentric Load and Eccentricity

What is the formula to find Minimum Stress using Eccentric Load and Eccentricity?

The formula of Minimum Stress using Eccentric Load and Eccentricity is expressed as Minimum Stress Value = (Eccentric Load on Column*(1-(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area). Here is an example- 3.8E-9 = (7000*(1-(6*0.025/0.6)))/(1.4).

How to calculate Minimum Stress using Eccentric Load and Eccentricity?

With Eccentric Load on Column (P), Eccentricity of Loading (e_load), Width of Column (b) & Column Cross Sectional Area (A_sectional) we can find Minimum Stress using Eccentric Load and Eccentricity using the formula - Minimum Stress Value = (Eccentric Load on Column*(1-(6*Eccentricity of Loading/Width of Column)))/(Column Cross Sectional Area).

What are the other ways to Calculate Minimum Stress Value?

Here are the different ways to Calculate Minimum Stress Value-

Minimum Stress Value=(Direct Stress-Bending Stress in Column)

Can the Minimum Stress using Eccentric Load and Eccentricity be negative?

No, the Minimum Stress using Eccentric Load and Eccentricity, measured in Pressure cannot be negative.

Which unit is used to measure Minimum Stress using Eccentric Load and Eccentricity?

Minimum Stress using Eccentric Load and Eccentricity is usually measured using the Megapascal[MPa] for Pressure. Pascal[MPa], Kilopascal[MPa], Bar[MPa] are the few other units in which Minimum Stress using Eccentric Load and Eccentricity can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Minimum Stress using Eccentric Load and Eccentricity Formula

​GoMinimum Stress Formula

Minimum Stress using Eccentric Load and Eccentricity Example

Minimum Stress using Eccentric Load and Eccentricity Solution

Minimum Stress using Eccentric Load and Eccentricity Formula Elements

Other Formulas to find Minimum Stress Value

Other formulas in Rectangular Section Is Subjected to Eccentric Load category

How to Evaluate Minimum Stress using Eccentric Load and Eccentricity?

FAQs on Minimum Stress using Eccentric Load and Eccentricity

Variable Name

GoMinimum Stress Formula