FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Minimum required Total Plate Thickness Formula

Fx Copy

LaTeX Copy

Thickness Corroded Plate which is the chemical reaction of a material with its environment that results in the deterioration or degradation of the material. Check FAQs

t corroded plate = {(\frac{β \cdot p \cdot ({l corroded plate}^{2})}{f maximum})}^{0.5}

t_{corroded plate} - Thickness Corroded Plate?β - Constant of Scaled Distance?p - Pressure Corroded Plate?l_{corroded plate} - Length Corroded Plate?f_maximum - Maximum Allowable Bending Stress?

Minimum required Total Plate Thickness Example

With values

With units

Only example

Here is how the Minimum required Total Plate Thickness equation looks like with Values.

Here is how the Minimum required Total Plate Thickness equation looks like with Units.

Here is how the Minimum required Total Plate Thickness equation looks like.

17.2409 = {(\frac{2 \cdot 0.02 \cdot (1009^{2})}{137})}^{0.5}

17.2409mm = {(\frac{2 \cdot 0.02N/mm² \cdot ({1009mm}^{2})}{137N/mm²})}^{0.5}

17.2409 = {(\frac{2 \cdot 0.02 \cdot (1009^{2})}{137})}^{0.5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Process Equipment Design » fx Minimum required Total Plate Thickness

Minimum required Total Plate Thickness Solution

Follow our step by step solution on how to calculate Minimum required Total Plate Thickness?

FIRST Step Consider the formula

t corroded plate = {(\frac{β \cdot p \cdot ({l corroded plate}^{2})}{f maximum})}^{0.5}

Next Step Substitute values of Variables

∴

t corroded plate = {(\frac{2 \cdot 0.02N/mm² \cdot ({1009mm}^{2})}{137N/mm²})}^{0.5}

Next Step Convert Units

∴

t corroded plate = {(\frac{2 \cdot 20000Pa \cdot ({1.009m}^{2})}{1.4E+8Pa})}^{0.5}

Next Step Prepare to Evaluate

∴

t corroded plate = {(\frac{2 \cdot 20000 \cdot ({1.009}^{2})}{1.4E+8})}^{0.5}

Next Step Evaluate

∴

t corroded plate = 0.0172409375327242m

Next Step Convert to Output's Unit

∴

t corroded plate = 17.2409375327242mm

LAST Step Rounding Answer

∴

t corroded plate = 17.2409mm

Minimum required Total Plate Thickness Formula Elements

Variables

Thickness Corroded Plate

Thickness Corroded Plate which is the chemical reaction of a material with its environment that results in the deterioration or degradation of the material.

Symbol: t_{corroded plate}

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness Corroded Plate

Constant of Scaled Distance

Constant of Scaled Distance is a number that is used to multiply the dimensions of an object or physical quantity in order to convert it to different measurement scale.

Symbol: β

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Constant of Scaled Distance

Pressure Corroded Plate

Pressure Corroded Plate can cause the corrosive substances to penetrate the metal more deeply, leading to more extensive corrosion and potentially weakening the structural integrity of the plate.

Symbol: p

Measurement: PressureUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Pressure Corroded Plate

Length Corroded Plate

Length Corroded Plate could be determined by the dimensions of the structure or system in which it will be used, the strength and support needed for the plate, and any other relevant factors.

Symbol: l_{corroded plate}

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length Corroded Plate

Maximum Allowable Bending Stress

Maximum Allowable Bending Stress is the maximum stress that a material can withstand while being bent without experiencing permanent deformation or failure.

Symbol: f_maximum

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Maximum Allowable Bending Stress

Other formulas in Design of Shell category

Go Circumferential Length of Plate

C length = (π \cdot D) - (W \cdot n)

Go Number of Layers

N = \frac{H}{w}

Go Pressure at Bottom of Tank

p hydrostatic = 10 \cdot ρ \cdot (H - 0.3)

Go Minimum Thickness of Shell at Bottom

t minimum = (\frac{p hydrostatic \cdot D}{2 \cdot f \cdot J}) + c

How to Evaluate Minimum required Total Plate Thickness?

Minimum required Total Plate Thickness evaluator uses Thickness Corroded Plate = ((Constant of Scaled Distance*Pressure Corroded Plate*(Length Corroded Plate^2))/(Maximum Allowable Bending Stress))^0.5 to evaluate the Thickness Corroded Plate, Minimum required Total Plate Thickness for a structural component depends on a variety of factors, including the type of material used, the loading conditions, the design code being followed, and the required level of structural integrity. Thickness Corroded Plate is denoted by t_{corroded plate} symbol.

How to evaluate Minimum required Total Plate Thickness using this online evaluator? To use this online evaluator for Minimum required Total Plate Thickness, enter Constant of Scaled Distance (β), Pressure Corroded Plate (p), Length Corroded Plate (l_{corroded plate}) & Maximum Allowable Bending Stress (f_maximum) and hit the calculate button.

FAQs on Minimum required Total Plate Thickness

What is the formula to find Minimum required Total Plate Thickness?

The formula of Minimum required Total Plate Thickness is expressed as Thickness Corroded Plate = ((Constant of Scaled Distance*Pressure Corroded Plate*(Length Corroded Plate^2))/(Maximum Allowable Bending Stress))^0.5. Here is an example- 17240.94 = ((2*20000*(1.009^2))/(137000000))^0.5.

How to calculate Minimum required Total Plate Thickness?

With Constant of Scaled Distance (β), Pressure Corroded Plate (p), Length Corroded Plate (l_{corroded plate}) & Maximum Allowable Bending Stress (f_maximum) we can find Minimum required Total Plate Thickness using the formula - Thickness Corroded Plate = ((Constant of Scaled Distance*Pressure Corroded Plate*(Length Corroded Plate^2))/(Maximum Allowable Bending Stress))^0.5.

Can the Minimum required Total Plate Thickness be negative?

No, the Minimum required Total Plate Thickness, measured in Length cannot be negative.

Which unit is used to measure Minimum required Total Plate Thickness?

Minimum required Total Plate Thickness is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Minimum required Total Plate Thickness can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Minimum required Total Plate Thickness Formula

Minimum required Total Plate Thickness Example

Minimum required Total Plate Thickness Solution

Minimum required Total Plate Thickness Formula Elements

Other formulas in Design of Shell category

How to Evaluate Minimum required Total Plate Thickness?

FAQs on Minimum required Total Plate Thickness

Variable Name