FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Metal Deposited in First Pass of Welding given Transverse Shrinkage Formula

Fx Copy

LaTeX Copy

Weld Metal Deposited in First Pass is just metal deposited in single pass of welding. Check FAQs

w 0 = \frac{w}{10^{\frac{S t - S 0}{b}}}

w₀ - Weld Metal Deposited in First Pass?w - Total Weight of Weld Metal Deposited?S_t - Total Transverse Shrinkage?S₀ - Transverse Shrinkage in First Pass?b - Constant For Multi Pass Shrinkage?

Metal Deposited in First Pass of Welding given Transverse Shrinkage Example

With values

With units

Only example

Here is how the Metal Deposited in First Pass of Welding given Transverse Shrinkage equation looks like with Values.

Here is how the Metal Deposited in First Pass of Welding given Transverse Shrinkage equation looks like with Units.

Here is how the Metal Deposited in First Pass of Welding given Transverse Shrinkage equation looks like.

4.99 = \frac{5.1406}{10^{\frac{5.3 - 2.2}{0.24}}}

4.99g = \frac{5.1406g}{10^{\frac{5.3mm - 2.2mm}{0.24}}}

4.99 = \frac{5.1406}{10^{\frac{5.3 - 2.2}{0.24}}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Welding » fx Metal Deposited in First Pass of Welding given Transverse Shrinkage

Metal Deposited in First Pass of Welding given Transverse Shrinkage Solution

Follow our step by step solution on how to calculate Metal Deposited in First Pass of Welding given Transverse Shrinkage?

FIRST Step Consider the formula

w 0 = \frac{w}{10^{\frac{S t - S 0}{b}}}

Next Step Substitute values of Variables

∴

w 0 = \frac{5.1406g}{10^{\frac{5.3mm - 2.2mm}{0.24}}}

Next Step Convert Units

∴

w 0 = \frac{0.0051kg}{10^{\frac{0.0053m - 0.0022m}{0.24}}}

Next Step Prepare to Evaluate

∴

w 0 = \frac{0.0051}{10^{\frac{0.0053 - 0.0022}{0.24}}}

Next Step Evaluate

∴

w 0 = 0.00498999975775201kg

Next Step Convert to Output's Unit

∴

w 0 = 4.98999975775201g

LAST Step Rounding Answer

∴

w 0 = 4.99g

Metal Deposited in First Pass of Welding given Transverse Shrinkage Formula Elements

Variables

Weld Metal Deposited in First Pass

Weld Metal Deposited in First Pass is just metal deposited in single pass of welding.

Symbol: w₀

Measurement: WeightUnit: g

Note: Value should be greater than 0.

Formulas to find Weld Metal Deposited in First Pass

Total Weight of Weld Metal Deposited

Total Weight of Weld Metal Deposited is the amount of metal deposited during welding.

Symbol: w

Measurement: WeightUnit: g

Note: Value should be greater than 0.

Formulas to find Total Weight of Weld Metal Deposited

Total Transverse Shrinkage

Total Transverse Shrinkage is the amount by which weldment shrinks due to multiple passes.

Symbol: S_t

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Total Transverse Shrinkage

Transverse Shrinkage in First Pass

Transverse Shrinkage in First Pass is the shrinkage occur on weld joint surface after the first welding.

Symbol: S₀

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Transverse Shrinkage in First Pass

Constant For Multi Pass Shrinkage

Constant For Multi Pass Shrinkage is total transverse shrinkage due to multi-pass welding.

Symbol: b

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Constant For Multi Pass Shrinkage

Other formulas in Butt Joints category

Go Transverse Shrinkage in Butt Joints

S b = (5.08 \cdot (\frac{A w}{p tb})) + (1.27 \cdot d)

Go Plate Thickness for given Transverse Shrinkage in Butt Joints

p tb = \frac{5.08 \cdot A w}{S b - (1.27 \cdot d)}

Go Cross-sectional area of weld for given transverse shrinkage in butt joints

A w = \frac{p tb \cdot (S b - 1.27 \cdot d)}{5.08}

Go Total Transverse Shrinkage during Multi-Pass Welding of Butt Joint

S t = S 0 + b \cdot (\log 10 (\frac{w}{w 0}))

How to Evaluate Metal Deposited in First Pass of Welding given Transverse Shrinkage?

Metal Deposited in First Pass of Welding given Transverse Shrinkage evaluator uses Weld Metal Deposited in First Pass = Total Weight of Weld Metal Deposited/(10^((Total Transverse Shrinkage-Transverse Shrinkage in First Pass)/Constant For Multi Pass Shrinkage)) to evaluate the Weld Metal Deposited in First Pass, The Metal Deposited in First Pass of Welding given Transverse Shrinkage formula is defined as metal deposited in the weld area during a single pass of welding. Weld Metal Deposited in First Pass is denoted by w₀ symbol.

How to evaluate Metal Deposited in First Pass of Welding given Transverse Shrinkage using this online evaluator? To use this online evaluator for Metal Deposited in First Pass of Welding given Transverse Shrinkage, enter Total Weight of Weld Metal Deposited (w), Total Transverse Shrinkage (S_t), Transverse Shrinkage in First Pass (S₀) & Constant For Multi Pass Shrinkage (b) and hit the calculate button.

FAQs on Metal Deposited in First Pass of Welding given Transverse Shrinkage

What is the formula to find Metal Deposited in First Pass of Welding given Transverse Shrinkage?

The formula of Metal Deposited in First Pass of Welding given Transverse Shrinkage is expressed as Weld Metal Deposited in First Pass = Total Weight of Weld Metal Deposited/(10^((Total Transverse Shrinkage-Transverse Shrinkage in First Pass)/Constant For Multi Pass Shrinkage)). Here is an example- 4999.085 = 0.00514064/(10^((0.0053-0.0022)/0.24)).

How to calculate Metal Deposited in First Pass of Welding given Transverse Shrinkage?

With Total Weight of Weld Metal Deposited (w), Total Transverse Shrinkage (S_t), Transverse Shrinkage in First Pass (S₀) & Constant For Multi Pass Shrinkage (b) we can find Metal Deposited in First Pass of Welding given Transverse Shrinkage using the formula - Weld Metal Deposited in First Pass = Total Weight of Weld Metal Deposited/(10^((Total Transverse Shrinkage-Transverse Shrinkage in First Pass)/Constant For Multi Pass Shrinkage)).

Can the Metal Deposited in First Pass of Welding given Transverse Shrinkage be negative?

No, the Metal Deposited in First Pass of Welding given Transverse Shrinkage, measured in Weight cannot be negative.

Which unit is used to measure Metal Deposited in First Pass of Welding given Transverse Shrinkage?

Metal Deposited in First Pass of Welding given Transverse Shrinkage is usually measured using the Gram[g] for Weight. Kilogram[g], Milligram[g], Ton (Metric)[g] are the few other units in which Metal Deposited in First Pass of Welding given Transverse Shrinkage can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Metal Deposited in First Pass of Welding given Transverse Shrinkage Formula

Metal Deposited in First Pass of Welding given Transverse Shrinkage Example

Metal Deposited in First Pass of Welding given Transverse Shrinkage Solution

Metal Deposited in First Pass of Welding given Transverse Shrinkage Formula Elements

Other formulas in Butt Joints category

How to Evaluate Metal Deposited in First Pass of Welding given Transverse Shrinkage?

FAQs on Metal Deposited in First Pass of Welding given Transverse Shrinkage

Variable Name