FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Mean radius given Deflection of Square Section Wire Spring Formula

Fx Copy

LaTeX Copy

The Mean Radius of spring coil is the average distance from the centerline of the spring wire to the axis of the spring. Check FAQs

R = {(\frac{δ \cdot G Torsion \cdot d^{4}}{44.7 \cdot W load \cdot N})}^{\frac{1}{3}}

R - Mean Radius?δ - Deflection of Spring?G_Torsion - Modulus of Rigidity?d - Diameter of Spring?W_load - Spring Load?N - Number of Coils?

Mean radius given Deflection of Square Section Wire Spring Example

With values

With units

Only example

Here is how the Mean radius given Deflection of Square Section Wire Spring equation looks like with Values.

Here is how the Mean radius given Deflection of Square Section Wire Spring equation looks like with Units.

Here is how the Mean radius given Deflection of Square Section Wire Spring equation looks like.

253.5946 = {(\frac{3.4 \cdot 40 \cdot 45^{4}}{44.7 \cdot 85 \cdot 9})}^{\frac{1}{3}}

253.5946mm = {(\frac{3.4mm \cdot 40GPa \cdot {45mm}^{4}}{44.7 \cdot 85N \cdot 9})}^{\frac{1}{3}}

253.5946 = {(\frac{3.4 \cdot 40 \cdot 45^{4}}{44.7 \cdot 85 \cdot 9})}^{\frac{1}{3}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Strength of Materials » fx Mean radius given Deflection of Square Section Wire Spring

Mean radius given Deflection of Square Section Wire Spring Solution

Follow our step by step solution on how to calculate Mean radius given Deflection of Square Section Wire Spring?

FIRST Step Consider the formula

R = {(\frac{δ \cdot G Torsion \cdot d^{4}}{44.7 \cdot W load \cdot N})}^{\frac{1}{3}}

Next Step Substitute values of Variables

∴

R = {(\frac{3.4mm \cdot 40GPa \cdot {45mm}^{4}}{44.7 \cdot 85N \cdot 9})}^{\frac{1}{3}}

Next Step Convert Units

∴

R = {(\frac{0.0034m \cdot 4E+10Pa \cdot {0.045m}^{4}}{44.7 \cdot 85N \cdot 9})}^{\frac{1}{3}}

Next Step Prepare to Evaluate

∴

R = {(\frac{0.0034 \cdot 4E+10 \cdot {0.045}^{4}}{44.7 \cdot 85 \cdot 9})}^{\frac{1}{3}}

Next Step Evaluate

∴

R = 0.253594600124304m

Next Step Convert to Output's Unit

∴

R = 253.594600124304mm

LAST Step Rounding Answer

∴

R = 253.5946mm

Mean radius given Deflection of Square Section Wire Spring Formula Elements

Variables

Mean Radius

The Mean Radius of spring coil is the average distance from the centerline of the spring wire to the axis of the spring.

Symbol: R

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Mean Radius

Deflection of Spring

Deflection of Spring is how a spring responds when force is applied or released.

Symbol: δ

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Deflection of Spring

Modulus of Rigidity

Modulus of Rigidity is the measure of the rigidity of the body, given by the ratio of shear stress to shear strain. It is often denoted by G.

Symbol: G_Torsion

Measurement: PressureUnit: GPa

Note: Value should be greater than 0.

Formulas to find Modulus of Rigidity

Diameter of Spring

Diameter of Spring wire is the diameter of the wire from which a spring is made.

Symbol: d

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Spring

Spring Load

Spring Load is the instantaneous load applied perpendicular to the specimen cross section.

Symbol: W_load

Measurement: ForceUnit: N

Note: Value can be positive or negative.

Formulas to find Spring Load

Number of Coils

Number of Coils in spring is the total number of turns made by wire along its length.

Symbol: N

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Number of Coils

Other formulas in Spring of Square Section Wire category

Go Deflection of Square Section Wire Spring

δ = \frac{44.7 \cdot W load \cdot R^{3} \cdot N}{G Torsion \cdot d^{4}}

Go Load given Deflection of Square Section Wire Spring

W load = \frac{δ \cdot G Torsion \cdot d^{4}}{44.7 \cdot R^{3} \cdot N}

Go Modulus of Rigidity using Deflection of Square Section Wire Spring

G Torsion = \frac{44.7 \cdot W load \cdot R^{3} \cdot N}{δ \cdot d^{4}}

Go Number of Coils given Deflection of Square Section Wire Spring

N = \frac{δ \cdot G Torsion \cdot d^{4}}{44.7 \cdot R^{3} \cdot W load}

How to Evaluate Mean radius given Deflection of Square Section Wire Spring?

Mean radius given Deflection of Square Section Wire Spring evaluator uses Mean Radius = ((Deflection of Spring*Modulus of Rigidity*Diameter of Spring^4)/(44.7*Spring Load*Number of Coils))^(1/3) to evaluate the Mean Radius, The Mean radius given Deflection of Square Section Wire Spring formula is defined as the radius of an equivalent helical spring. Mean Radius is denoted by R symbol.

How to evaluate Mean radius given Deflection of Square Section Wire Spring using this online evaluator? To use this online evaluator for Mean radius given Deflection of Square Section Wire Spring, enter Deflection of Spring (δ), Modulus of Rigidity (G_Torsion), Diameter of Spring (d), Spring Load (W_load) & Number of Coils (N) and hit the calculate button.

FAQs on Mean radius given Deflection of Square Section Wire Spring

What is the formula to find Mean radius given Deflection of Square Section Wire Spring?

The formula of Mean radius given Deflection of Square Section Wire Spring is expressed as Mean Radius = ((Deflection of Spring*Modulus of Rigidity*Diameter of Spring^4)/(44.7*Spring Load*Number of Coils))^(1/3). Here is an example- 224979.9 = ((0.0034*40000000000*0.045^4)/(44.7*85*9))^(1/3).

How to calculate Mean radius given Deflection of Square Section Wire Spring?

With Deflection of Spring (δ), Modulus of Rigidity (G_Torsion), Diameter of Spring (d), Spring Load (W_load) & Number of Coils (N) we can find Mean radius given Deflection of Square Section Wire Spring using the formula - Mean Radius = ((Deflection of Spring*Modulus of Rigidity*Diameter of Spring^4)/(44.7*Spring Load*Number of Coils))^(1/3).

Can the Mean radius given Deflection of Square Section Wire Spring be negative?

No, the Mean radius given Deflection of Square Section Wire Spring, measured in Length cannot be negative.

Which unit is used to measure Mean radius given Deflection of Square Section Wire Spring?

Mean radius given Deflection of Square Section Wire Spring is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Mean radius given Deflection of Square Section Wire Spring can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Mean radius given Deflection of Square Section Wire Spring Formula

Mean radius given Deflection of Square Section Wire Spring Example

Mean radius given Deflection of Square Section Wire Spring Solution

Mean radius given Deflection of Square Section Wire Spring Formula Elements

Other formulas in Spring of Square Section Wire category

How to Evaluate Mean radius given Deflection of Square Section Wire Spring?

FAQs on Mean radius given Deflection of Square Section Wire Spring

Variable Name