FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Formula

GoMaximum Shear Stress-induced given Allowable Load per mm length of Transverse Fillet Weld Formula

Fx Copy

LaTeX Copy

Maximum shear stress in transverse fillet weld is the maximum force per unit area that acts coplanar with a cross-section of the weld material arises due to shear forces. Check FAQs

𝜏 max = 1.21 \cdot \frac{P}{h l \cdot L}

𝜏_max - Maximum Shear Stress in Transverse Fillet Weld?P - Load on Weld?h_l - Leg of Weld?L - Length of Weld?

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Example

With values

With units

Only example

Here is how the Maximum Shear Stress-induced in Plane that is Inclined at Angle theta equation looks like with Values.

Here is how the Maximum Shear Stress-induced in Plane that is Inclined at Angle theta equation looks like with Units.

Here is how the Maximum Shear Stress-induced in Plane that is Inclined at Angle theta equation looks like.

78.6471 = 1.21 \cdot \frac{268.7}{21.2 \cdot 195}

78.6471N/mm² = 1.21 \cdot \frac{268.7kN}{21.2mm \cdot 195mm}

78.6471 = 1.21 \cdot \frac{268.7}{21.2 \cdot 195}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Design of Machine Elements » fx Maximum Shear Stress-induced in Plane that is Inclined at Angle theta

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Solution

Follow our step by step solution on how to calculate Maximum Shear Stress-induced in Plane that is Inclined at Angle theta?

FIRST Step Consider the formula

𝜏 max = 1.21 \cdot \frac{P}{h l \cdot L}

Next Step Substitute values of Variables

∴

𝜏 max = 1.21 \cdot \frac{268.7kN}{21.2mm \cdot 195mm}

Next Step Convert Units

∴

𝜏 max = 1.21 \cdot \frac{268700N}{0.0212m \cdot 0.195m}

Next Step Prepare to Evaluate

∴

𝜏 max = 1.21 \cdot \frac{268700}{0.0212 \cdot 0.195}

Next Step Evaluate

∴

𝜏 max = 78647073.0527334Pa

Next Step Convert to Output's Unit

∴

𝜏 max = 78.6470730527334N/mm²

LAST Step Rounding Answer

∴

𝜏 max = 78.6471N/mm²

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Formula Elements

Variables

Maximum Shear Stress in Transverse Fillet Weld

Maximum shear stress in transverse fillet weld is the maximum force per unit area that acts coplanar with a cross-section of the weld material arises due to shear forces.

Symbol: 𝜏_max

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Maximum Shear Stress in Transverse Fillet Weld

Load on Weld

The load on weld refers to the amount of stress or force that the weld joint is subjected to during its application or intended use.

Symbol: P

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Load on Weld

Leg of Weld

The Leg of Weld is the distance from the joint root to the toe of the weld.

Symbol: h_l

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Leg of Weld

Length of Weld

The Length of Weld is the linear distance of the welding segment joined by the welded joint.

Symbol: L

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Weld

Other Formulas to find Maximum Shear Stress in Transverse Fillet Weld

Go Maximum Shear Stress-induced given Allowable Load per mm length of Transverse Fillet Weld

𝜏 max = \frac{P a}{0.8284 \cdot h l}

Other formulas in Transverse Fillet Weld category

Go Permissible Tensile Strength for Double Transverse Fillet Joint

σ t = \frac{P}{1.414 \cdot L \cdot L}

Go Tensile Stress in Transverse Fillet Weld

σ t = \frac{P t}{0.707 \cdot h l \cdot L}

Go Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld

P t = σ t \cdot 0.707 \cdot h l \cdot L

Go Thickness of Plate given Tensile Stress in Transverse Fillet Weld

t = \frac{P t}{L \cdot σ t}

How to Evaluate Maximum Shear Stress-induced in Plane that is Inclined at Angle theta?

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta evaluator uses Maximum Shear Stress in Transverse Fillet Weld = 1.21*Load on Weld/(Leg of Weld*Length of Weld) to evaluate the Maximum Shear Stress in Transverse Fillet Weld, The Maximum Shear Stress-induced in Plane that is Inclined at Angle theta formula is defined as force tending to cause deformation of material by slippage along plane or planes parallel to imposed stress. Maximum Shear Stress in Transverse Fillet Weld is denoted by 𝜏_max symbol.

How to evaluate Maximum Shear Stress-induced in Plane that is Inclined at Angle theta using this online evaluator? To use this online evaluator for Maximum Shear Stress-induced in Plane that is Inclined at Angle theta, enter Load on Weld (P), Leg of Weld (h_l) & Length of Weld (L) and hit the calculate button.

FAQs on Maximum Shear Stress-induced in Plane that is Inclined at Angle theta

What is the formula to find Maximum Shear Stress-induced in Plane that is Inclined at Angle theta?

The formula of Maximum Shear Stress-induced in Plane that is Inclined at Angle theta is expressed as Maximum Shear Stress in Transverse Fillet Weld = 1.21*Load on Weld/(Leg of Weld*Length of Weld). Here is an example- 7.9E-5 = 1.21*268700/(0.0212*0.195).

How to calculate Maximum Shear Stress-induced in Plane that is Inclined at Angle theta?

With Load on Weld (P), Leg of Weld (h_l) & Length of Weld (L) we can find Maximum Shear Stress-induced in Plane that is Inclined at Angle theta using the formula - Maximum Shear Stress in Transverse Fillet Weld = 1.21*Load on Weld/(Leg of Weld*Length of Weld).

What are the other ways to Calculate Maximum Shear Stress in Transverse Fillet Weld?

Here are the different ways to Calculate Maximum Shear Stress in Transverse Fillet Weld-

Maximum Shear Stress in Transverse Fillet Weld=Load per Unit Length in Transverse Fillet Weld/(0.8284*Leg of Weld)

Can the Maximum Shear Stress-induced in Plane that is Inclined at Angle theta be negative?

No, the Maximum Shear Stress-induced in Plane that is Inclined at Angle theta, measured in Stress cannot be negative.

Which unit is used to measure Maximum Shear Stress-induced in Plane that is Inclined at Angle theta?

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta is usually measured using the Newton per Square Millimeter[N/mm²] for Stress. Pascal[N/mm²], Newton per Square Meter[N/mm²], Kilonewton per Square Meter[N/mm²] are the few other units in which Maximum Shear Stress-induced in Plane that is Inclined at Angle theta can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Formula

​GoMaximum Shear Stress-induced given Allowable Load per mm length of Transverse Fillet Weld Formula

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Example

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Solution

Maximum Shear Stress-induced in Plane that is Inclined at Angle theta Formula Elements

Other Formulas to find Maximum Shear Stress in Transverse Fillet Weld

Other formulas in Transverse Fillet Weld category

How to Evaluate Maximum Shear Stress-induced in Plane that is Inclined at Angle theta?

FAQs on Maximum Shear Stress-induced in Plane that is Inclined at Angle theta

Variable Name

GoMaximum Shear Stress-induced given Allowable Load per mm length of Transverse Fillet Weld Formula