FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Location factor at distance X of heat exchanger Formula

Fx Copy

LaTeX Copy

Location factor the sum of all factors that an enterprise considers when choosing a location, for setting up a heat exchanger. Check FAQs

E = \frac{h Conv \cdot SA \cdot x}{c \cdot m}

E - Location factor?h_Conv - Convective Heat Transfer Coefficient?SA - Surface Area?x - Distance from Point to YY Axis?c - Specific heat of fluid?m - Mass Flowrate?

Location factor at distance X of heat exchanger Example

With values

With units

Only example

Here is how the Location factor at distance X of heat exchanger equation looks like with Values.

Here is how the Location factor at distance X of heat exchanger equation looks like with Units.

Here is how the Location factor at distance X of heat exchanger equation looks like.

0.1125 = \frac{0.5 \cdot 18 \cdot 1.5}{10 \cdot 12}

0.1125 = \frac{0.5W/m²*K \cdot 18m² \cdot 1.5m}{10J/(kg*K) \cdot 12kg/s}

0.1125 = \frac{0.5 \cdot 18 \cdot 1.5}{10 \cdot 12}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Heat and Mass Transfer » fx Location factor at distance X of heat exchanger

Location factor at distance X of heat exchanger Solution

Follow our step by step solution on how to calculate Location factor at distance X of heat exchanger?

FIRST Step Consider the formula

E = \frac{h Conv \cdot SA \cdot x}{c \cdot m}

Next Step Substitute values of Variables

∴

E = \frac{0.5W/m²*K \cdot 18m² \cdot 1.5m}{10J/(kg*K) \cdot 12kg/s}

Next Step Prepare to Evaluate

∴

E = \frac{0.5 \cdot 18 \cdot 1.5}{10 \cdot 12}

LAST Step Evaluate

∴

E = 0.1125

Location factor at distance X of heat exchanger Formula Elements

Variables

Location factor

Location factor the sum of all factors that an enterprise considers when choosing a location, for setting up a heat exchanger.

Symbol: E

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Location factor

Convective Heat Transfer Coefficient

Convective Heat Transfer Coefficient is the heat transfer due to convection.

Symbol: h_Conv

Measurement: Heat Transfer CoefficientUnit: W/m²*K

Note: Value can be positive or negative.

Formulas to find Convective Heat Transfer Coefficient

Surface Area

The Surface Area of a three-dimensional shape is the sum of all of the surface areas of each of the sides.

Symbol: SA

Measurement: AreaUnit: m²

Note: Value can be positive or negative.

Formulas to find Surface Area

Distance from Point to YY Axis

Distance from Point to YY Axis is the distance from the point to the YY axis where stress is to be computed.

Symbol: x

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Distance from Point to YY Axis

Specific heat of fluid

Specific heat of fluid is the amount f heat required to increase the temperature of the fluid by one degree.

Symbol: c

Measurement: Specific Heat CapacityUnit: J/(kg*K)

Note: Value can be positive or negative.

Formulas to find Specific heat of fluid

Mass Flowrate

Mass flowrate is the mass moved in unit amount of time.

Symbol: m

Measurement: Mass Flow RateUnit: kg/s

Note: Value can be positive or negative.

Formulas to find Mass Flowrate

Other formulas in Physical Parameters of Heat Exchanger category

Go Correction factor in heat exchanger

f = \frac{Q}{U \cdot A \cdot ΔT m}

Go Area of heat exchanger

A = \frac{Q}{U \cdot ΔT m \cdot f}

Go Mass flow rate of hot fluid

mh = (ϵ \cdot \frac{C min}{ch}) \cdot (\frac{1}{\frac{T1 - t2}{T1 - t1}})

Go Mass flow rate of cold fluid

mc = (ϵ \cdot \frac{C min}{cc}) \cdot (\frac{1}{\frac{t2 - t1}{T1 - t1}})

How to Evaluate Location factor at distance X of heat exchanger?

Location factor at distance X of heat exchanger evaluator uses Location factor = (Convective Heat Transfer Coefficient*Surface Area*Distance from Point to YY Axis)/(Specific heat of fluid*Mass Flowrate) to evaluate the Location factor, Location factor at distance X of heat exchanger formula is defined as a parameter that quantifies the effectiveness of heat transfer at a specific distance from the heat exchanger, considering convection, surface area, and material properties. Location factor is denoted by E symbol.

How to evaluate Location factor at distance X of heat exchanger using this online evaluator? To use this online evaluator for Location factor at distance X of heat exchanger, enter Convective Heat Transfer Coefficient (h_Conv), Surface Area (SA), Distance from Point to YY Axis (x), Specific heat of fluid (c) & Mass Flowrate (m) and hit the calculate button.

FAQs on Location factor at distance X of heat exchanger

What is the formula to find Location factor at distance X of heat exchanger?

The formula of Location factor at distance X of heat exchanger is expressed as Location factor = (Convective Heat Transfer Coefficient*Surface Area*Distance from Point to YY Axis)/(Specific heat of fluid*Mass Flowrate). Here is an example- 0.1125 = (0.5*18*1.5)/(10*12).

How to calculate Location factor at distance X of heat exchanger?

With Convective Heat Transfer Coefficient (h_Conv), Surface Area (SA), Distance from Point to YY Axis (x), Specific heat of fluid (c) & Mass Flowrate (m) we can find Location factor at distance X of heat exchanger using the formula - Location factor = (Convective Heat Transfer Coefficient*Surface Area*Distance from Point to YY Axis)/(Specific heat of fluid*Mass Flowrate).

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Location factor at distance X of heat exchanger Formula

Location factor at distance X of heat exchanger Example

Location factor at distance X of heat exchanger Solution

Location factor at distance X of heat exchanger Formula Elements

Other formulas in Physical Parameters of Heat Exchanger category

How to Evaluate Location factor at distance X of heat exchanger?

FAQs on Location factor at distance X of heat exchanger

Variable Name