FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Load Resistance with respect to Transconductance Formula

Fx Copy

LaTeX Copy

Load resistance is the resistance value of load given for the network. Check FAQs

R L = - (A v \cdot (\frac{1}{g m} + R se))

R_L - Load Resistance?A_v - Output Voltage Gain?g_m - Transconductance?R_se - Series Resistor?

Load Resistance with respect to Transconductance Example

With values

With units

Only example

Here is how the Load Resistance with respect to Transconductance equation looks like with Values.

Here is how the Load Resistance with respect to Transconductance equation looks like with Units.

Here is how the Load Resistance with respect to Transconductance equation looks like.

4.3122 = - (-0.352 \cdot (\frac{1}{2.04} + 12.25))

4.3122kΩ = - (-0.352 \cdot (\frac{1}{2.04S} + 12.25kΩ))

4.3122 = - (-0.352 \cdot (\frac{1}{2.04} + 12.25))

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electronics » Category

Amplifiers » fx Load Resistance with respect to Transconductance

Load Resistance with respect to Transconductance Solution

Follow our step by step solution on how to calculate Load Resistance with respect to Transconductance?

FIRST Step Consider the formula

R L = - (A v \cdot (\frac{1}{g m} + R se))

Next Step Substitute values of Variables

∴

R L = - (-0.352 \cdot (\frac{1}{2.04S} + 12.25kΩ))

Next Step Convert Units

∴

R L = - (-0.352 \cdot (\frac{1}{2.04S} + 12250Ω))

Next Step Prepare to Evaluate

∴

R L = - (-0.352 \cdot (\frac{1}{2.04} + 12250))

Next Step Evaluate

∴

R L = 4312.17254901961Ω

Next Step Convert to Output's Unit

∴

R L = 4.31217254901961kΩ

LAST Step Rounding Answer

∴

R L = 4.3122kΩ

Load Resistance with respect to Transconductance Formula Elements

Variables

Load Resistance

Load resistance is the resistance value of load given for the network.

Symbol: R_L

Measurement: Electric ResistanceUnit: kΩ

Note: Value should be greater than 0.

Formulas to find Load Resistance

Output Voltage Gain

Output voltage gain is the difference between the output signal voltage level in decibels and the input signal voltage level in decibels.

Symbol: A_v

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Output Voltage Gain

Transconductance

Transconductance is the ratio of the change in current at the output terminal to the change in the voltage at the input terminal of an active device.

Symbol: g_m

Measurement: TransconductanceUnit: S

Note: Value should be greater than 0.

Formulas to find Transconductance

Series Resistor

Series Resistor is a current limiting resistor connected in series with the input voltage. It is used to limit maximum current flowing in a circuit.

Symbol: R_se

Measurement: Electric ResistanceUnit: kΩ

Note: Value should be greater than 0.

Formulas to find Series Resistor

Other formulas in Amplifier Characteristics category

Go Power Gain of Amplifier

A p = \frac{P L}{P in}

Go Current Gain of Amplifier

A i = \frac{I o}{i in}

Go Base Junction Width of Amplifier

w b = \frac{A be \cdot [Charge-e] \cdot D n \cdot n po}{i sat}

Go Differential Voltage in Amplifier

V id = \frac{V o}{(\frac{R 4}{R 3}) \cdot (1 + \frac{R 2}{R 1})}

How to Evaluate Load Resistance with respect to Transconductance?

Load Resistance with respect to Transconductance evaluator uses Load Resistance = -(Output Voltage Gain*(1/Transconductance+Series Resistor)) to evaluate the Load Resistance, The Load Resistance with respect to Transconductance is defined as the measure of the resistance of a transistor when it is in the active region and conducting current. Load Resistance is denoted by R_L symbol.

How to evaluate Load Resistance with respect to Transconductance using this online evaluator? To use this online evaluator for Load Resistance with respect to Transconductance, enter Output Voltage Gain (A_v), Transconductance (g_m) & Series Resistor (R_se) and hit the calculate button.

FAQs on Load Resistance with respect to Transconductance

What is the formula to find Load Resistance with respect to Transconductance?

The formula of Load Resistance with respect to Transconductance is expressed as Load Resistance = -(Output Voltage Gain*(1/Transconductance+Series Resistor)). Here is an example- 0.004485 = -((-0.352)*(1/0.00204+12250)).

How to calculate Load Resistance with respect to Transconductance?

With Output Voltage Gain (A_v), Transconductance (g_m) & Series Resistor (R_se) we can find Load Resistance with respect to Transconductance using the formula - Load Resistance = -(Output Voltage Gain*(1/Transconductance+Series Resistor)).

Can the Load Resistance with respect to Transconductance be negative?

No, the Load Resistance with respect to Transconductance, measured in Electric Resistance cannot be negative.

Which unit is used to measure Load Resistance with respect to Transconductance?

Load Resistance with respect to Transconductance is usually measured using the Kilohm[kΩ] for Electric Resistance. Ohm[kΩ], Megohm[kΩ], Microhm[kΩ] are the few other units in which Load Resistance with respect to Transconductance can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Load Resistance with respect to Transconductance Formula

Load Resistance with respect to Transconductance Example

Load Resistance with respect to Transconductance Solution

Load Resistance with respect to Transconductance Formula Elements

Other formulas in Amplifier Characteristics category

How to Evaluate Load Resistance with respect to Transconductance?

FAQs on Load Resistance with respect to Transconductance

Variable Name