FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Load Given Production of Scrap by Machines Formula

Fx Copy

LaTeX Copy

Load in Scraper Production is the volume of scrap produced in every trip. Check FAQs

L = (\frac{P s}{f})

L - Load in Scraper Production?P_s - Production Required in Scraper Production?f - Trips per Hour?

Load Given Production of Scrap by Machines Example

With values

With units

Only example

Here is how the Load Given Production of Scrap by Machines equation looks like with Values.

Here is how the Load Given Production of Scrap by Machines equation looks like with Units.

Here is how the Load Given Production of Scrap by Machines equation looks like.

18.75 = (\frac{75}{4})

18.75m³ = (\frac{75m³/hr}{4rev/h})

18.75 = (\frac{75}{4})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Geotechnical Engineering » fx Load Given Production of Scrap by Machines

Load Given Production of Scrap by Machines Solution

Follow our step by step solution on how to calculate Load Given Production of Scrap by Machines?

FIRST Step Consider the formula

L = (\frac{P s}{f})

Next Step Substitute values of Variables

∴

L = (\frac{75m³/hr}{4rev/h})

Next Step Convert Units

∴

L = (\frac{0.0208m³/s}{0.0011Hz})

Next Step Prepare to Evaluate

∴

L = (\frac{0.0208}{0.0011})

LAST Step Evaluate

∴

L = 18.75m³

Load Given Production of Scrap by Machines Formula Elements

Variables

Load in Scraper Production

Load in Scraper Production is the volume of scrap produced in every trip.

Symbol: L

Measurement: VolumeUnit: m³

Note: Value should be greater than 0.

Formulas to find Load in Scraper Production

Production Required in Scraper Production

Production Required in Scraper Production is the amount of scrap produced.

Symbol: P_s

Measurement: Volumetric Flow RateUnit: m³/hr

Note: Value should be greater than 0.

Formulas to find Production Required in Scraper Production

Trips per Hour

Trips per Hour means the total transfer occured in a hour.

Symbol: f

Measurement: FrequencyUnit: rev/h

Note: Value should be greater than 0.

Formulas to find Trips per Hour

Other formulas in Scraper Production category

Go Production of Scrap by Machines

P s = (L \cdot f)

Go Trips per Hour given Production of Scrap by Machines

f = (\frac{P s}{L})

Go Trips per Hour for Excavating Scrap

f = (\frac{W T}{C t})

Go Working Time given Trips per Hour for Excavating Scrap

W T = (f \cdot C t)

How to Evaluate Load Given Production of Scrap by Machines?

Load Given Production of Scrap by Machines evaluator uses Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour) to evaluate the Load in Scraper Production, The Load Given Production of Scrap by Machines is defined as the volume of load when we have prior information of production and trips. Load in Scraper Production is denoted by L symbol.

How to evaluate Load Given Production of Scrap by Machines using this online evaluator? To use this online evaluator for Load Given Production of Scrap by Machines, enter Production Required in Scraper Production (P_s) & Trips per Hour (f) and hit the calculate button.

FAQs on Load Given Production of Scrap by Machines

What is the formula to find Load Given Production of Scrap by Machines?

The formula of Load Given Production of Scrap by Machines is expressed as Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour). Here is an example- 18.75 = (0.0208333333333333/0.00111111111111111).

How to calculate Load Given Production of Scrap by Machines?

With Production Required in Scraper Production (P_s) & Trips per Hour (f) we can find Load Given Production of Scrap by Machines using the formula - Load in Scraper Production = (Production Required in Scraper Production/Trips per Hour).

Can the Load Given Production of Scrap by Machines be negative?

No, the Load Given Production of Scrap by Machines, measured in Volume cannot be negative.

Which unit is used to measure Load Given Production of Scrap by Machines?

Load Given Production of Scrap by Machines is usually measured using the Cubic Meter[m³] for Volume. Cubic Centimeter[m³], Cubic Millimeter[m³], Liter[m³] are the few other units in which Load Given Production of Scrap by Machines can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Load Given Production of Scrap by Machines Formula

Load Given Production of Scrap by Machines Example

Load Given Production of Scrap by Machines Solution

Load Given Production of Scrap by Machines Formula Elements

Other formulas in Scraper Production category

How to Evaluate Load Given Production of Scrap by Machines?

FAQs on Load Given Production of Scrap by Machines

Variable Name