FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Line Losses using Load Current (2 Phase 4 Wire US) Formula

GoLine Losses using Area of X-Section (2 Phase 4 Wire US) Formula

GoLine Losses (2 Phase 4 Wire US) Formula

Fx Copy

LaTeX Copy

Line Losses is defined as the total losses occurring in an Underground AC line when in use. Check FAQs

P loss = I^{2} \cdot 2 \cdot ρ \cdot \frac{L}{A}

P_loss - Line Losses?I - Current Underground AC?ρ - Resistivity?L - Length of Underground AC Wire?A - Area of Underground AC Wire?

Line Losses using Load Current (2 Phase 4 Wire US) Example

With values

With units

Only example

Here is how the Line Losses using Load Current (2 Phase 4 Wire US) equation looks like with Values.

Here is how the Line Losses using Load Current (2 Phase 4 Wire US) equation looks like with Units.

Here is how the Line Losses using Load Current (2 Phase 4 Wire US) equation looks like.

0.0516 = 9^{2} \cdot 2 \cdot 1.7E-5 \cdot \frac{24}{1.28}

0.0516W = {9A}^{2} \cdot 2 \cdot 1.7E-5Ω*m \cdot \frac{24m}{1.28m²}

0.0516 = 9^{2} \cdot 2 \cdot 1.7E-5 \cdot \frac{24}{1.28}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electrical » Category

Power System » fx Line Losses using Load Current (2 Phase 4 Wire US)

Line Losses using Load Current (2 Phase 4 Wire US) Solution

Follow our step by step solution on how to calculate Line Losses using Load Current (2 Phase 4 Wire US)?

FIRST Step Consider the formula

P loss = I^{2} \cdot 2 \cdot ρ \cdot \frac{L}{A}

Next Step Substitute values of Variables

∴

P loss = {9A}^{2} \cdot 2 \cdot 1.7E-5Ω*m \cdot \frac{24m}{1.28m²}

Next Step Prepare to Evaluate

∴

P loss = 9^{2} \cdot 2 \cdot 1.7E-5 \cdot \frac{24}{1.28}

Next Step Evaluate

∴

P loss = 0.0516375W

LAST Step Rounding Answer

∴

P loss = 0.0516W

Line Losses using Load Current (2 Phase 4 Wire US) Formula Elements

Variables

Line Losses

Line Losses is defined as the total losses occurring in an Underground AC line when in use.

Symbol: P_loss

Measurement: PowerUnit: W

Note: Value can be positive or negative.

Formulas to find Line Losses

Current Underground AC

Current Underground AC is defined as the current flowing through the overhead ac supply wire.

Symbol: I

Measurement: Electric CurrentUnit: A

Note: Value can be positive or negative.

Formulas to find Current Underground AC

Resistivity

Resistivity is the measure of how strongly a material opposes the flow of current through them.

Symbol: ρ

Measurement: Electric ResistivityUnit: Ω*m

Note: Value can be positive or negative.

Formulas to find Resistivity

Length of Underground AC Wire

Length of Underground AC Wire is the total length of the wire from one end to other end.

Symbol: L

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Length of Underground AC Wire

Area of Underground AC Wire

Area of Underground AC Wire is defined as the cross-sectional area of the wire of an AC supply system.

Symbol: A

Measurement: AreaUnit: m²

Note: Value can be positive or negative.

Formulas to find Area of Underground AC Wire

Other Formulas to find Line Losses

Go Line Losses using Area of X-Section (2 Phase 4 Wire US)

P loss = 4 \cdot ρ \cdot L \cdot \frac{P^{2}}{A \cdot ({V m}^{2}) \cdot ({\cos (Φ)}^{2})}

Go Line Losses (2 Phase 4 Wire US)

P loss = 2 \cdot (I^{2}) \cdot R

Go Line Losses using Volume of Conductor Material (2 Phase 4 Wire US)

P loss = {(I \cdot L)}^{2} \cdot 4 \cdot \frac{ρ}{V}

Other formulas in Wire Parameters category

Go Length using Line Losses (2 Phase 4 Wire US)

L = P loss \cdot \frac{A}{2 \cdot (I^{2}) \cdot ρ}

Go Length using Area of X-Section (2 Phase 4 Wire US)

L = \frac{A \cdot P loss \cdot ({V m}^{2}) \cdot {(\cos (Φ))}^{2}}{4 \cdot ρ \cdot (P^{2})}

Go Area using Line Losses (2 Phase 4 Wire US)

A = (I^{2}) \cdot 2 \cdot ρ \cdot \frac{L}{P loss}

Go Area using Volume of Conductor Material (2 Phase 4 Wire US)

A = \frac{V}{2 \cdot L}

How to Evaluate Line Losses using Load Current (2 Phase 4 Wire US)?

Line Losses using Load Current (2 Phase 4 Wire US) evaluator uses Line Losses = Current Underground AC^2*2*Resistivity*Length of Underground AC Wire/Area of Underground AC Wire to evaluate the Line Losses, The Line Losses using Load Current (2 phase 4 wire US) formula is defined as the loss of electric energy due to the heating of line wires by the current. Line Losses is denoted by P_loss symbol.

How to evaluate Line Losses using Load Current (2 Phase 4 Wire US) using this online evaluator? To use this online evaluator for Line Losses using Load Current (2 Phase 4 Wire US), enter Current Underground AC (I), Resistivity (ρ), Length of Underground AC Wire (L) & Area of Underground AC Wire (A) and hit the calculate button.

FAQs on Line Losses using Load Current (2 Phase 4 Wire US)

What is the formula to find Line Losses using Load Current (2 Phase 4 Wire US)?

The formula of Line Losses using Load Current (2 Phase 4 Wire US) is expressed as Line Losses = Current Underground AC^2*2*Resistivity*Length of Underground AC Wire/Area of Underground AC Wire. Here is an example- 0.051638 = 9^2*2*1.7E-05*24/1.28.

How to calculate Line Losses using Load Current (2 Phase 4 Wire US)?

With Current Underground AC (I), Resistivity (ρ), Length of Underground AC Wire (L) & Area of Underground AC Wire (A) we can find Line Losses using Load Current (2 Phase 4 Wire US) using the formula - Line Losses = Current Underground AC^2*2*Resistivity*Length of Underground AC Wire/Area of Underground AC Wire.

What are the other ways to Calculate Line Losses?

Here are the different ways to Calculate Line Losses-

Line Losses=4*Resistivity*Length of Underground AC Wire*(Power Transmitted^2)/(Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*(cos(Phase Difference)^2))
Line Losses=2*(Current Underground AC^2)*Resistance Underground AC
Line Losses=(Current Underground AC*Length of Underground AC Wire)^2*4*Resistivity/Volume Of Conductor

Can the Line Losses using Load Current (2 Phase 4 Wire US) be negative?

Yes, the Line Losses using Load Current (2 Phase 4 Wire US), measured in Power can be negative.

Which unit is used to measure Line Losses using Load Current (2 Phase 4 Wire US)?

Line Losses using Load Current (2 Phase 4 Wire US) is usually measured using the Watt[W] for Power. Kilowatt[W], Milliwatt[W], Microwatt[W] are the few other units in which Line Losses using Load Current (2 Phase 4 Wire US) can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Line Losses using Load Current (2 Phase 4 Wire US) Formula

​GoLine Losses using Area of X-Section (2 Phase 4 Wire US) Formula

​GoLine Losses (2 Phase 4 Wire US) Formula

Line Losses using Load Current (2 Phase 4 Wire US) Example

Line Losses using Load Current (2 Phase 4 Wire US) Solution

Line Losses using Load Current (2 Phase 4 Wire US) Formula Elements

Other Formulas to find Line Losses

Other formulas in Wire Parameters category

How to Evaluate Line Losses using Load Current (2 Phase 4 Wire US)?

FAQs on Line Losses using Load Current (2 Phase 4 Wire US)

Variable Name

GoLine Losses using Area of X-Section (2 Phase 4 Wire US) Formula

GoLine Losses (2 Phase 4 Wire US) Formula