FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Length of Weld given Tensile Strength of Double Fillet Lap Formula

GoLength of Weld given Area of Fillet Weld and Throat Thickness for Double Fillet Lap Joint Formula

GoLength of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint Formula

Fx Copy

LaTeX Copy

The Length of Weld is the linear distance of each weld segment. Check FAQs

l = \frac{TS}{1.414 \cdot σ t \cdot t plate}

l - Length of Weld?TS - Tensile Strength?σ_t - Tensile Stress?t_plate - Thickness of Plate?

Length of Weld given Tensile Strength of Double Fillet Lap Example

With values

With units

Only example

Here is how the Length of Weld given Tensile Strength of Double Fillet Lap equation looks like with Values.

Here is how the Length of Weld given Tensile Strength of Double Fillet Lap equation looks like with Units.

Here is how the Length of Weld given Tensile Strength of Double Fillet Lap equation looks like.

64459.571 = \frac{35}{1.414 \cdot 32 \cdot 12}

64459.571mm = \frac{35MPa}{1.414 \cdot 32MPa \cdot 12mm}

64459.571 = \frac{35}{1.414 \cdot 32 \cdot 12}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Length of Weld given Tensile Strength of Double Fillet Lap

Length of Weld given Tensile Strength of Double Fillet Lap Solution

Follow our step by step solution on how to calculate Length of Weld given Tensile Strength of Double Fillet Lap?

FIRST Step Consider the formula

l = \frac{TS}{1.414 \cdot σ t \cdot t plate}

Next Step Substitute values of Variables

∴

l = \frac{35MPa}{1.414 \cdot 32MPa \cdot 12mm}

Next Step Convert Units

∴

l = \frac{3.5E+7Pa}{1.414 \cdot 3.2E+7Pa \cdot 0.012m}

Next Step Prepare to Evaluate

∴

l = \frac{3.5E+7}{1.414 \cdot 3.2E+7 \cdot 0.012}

Next Step Evaluate

∴

l = 64.4595709570957m

Next Step Convert to Output's Unit

∴

l = 64459.5709570957mm

LAST Step Rounding Answer

∴

l = 64459.571mm

Length of Weld given Tensile Strength of Double Fillet Lap Formula Elements

Variables

Length of Weld

The Length of Weld is the linear distance of each weld segment.

Symbol: l

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Length of Weld

Tensile Strength

Tensile strength is the stress at the maximum on the engineering stress-strain curve.

Symbol: TS

Measurement: PressureUnit: MPa

Note: Value can be positive or negative.

Formulas to find Tensile Strength

Tensile Stress

Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Other Formulas to find Length of Weld

Go Length of Weld given Area of Fillet Weld and Throat Thickness for Double Fillet Lap Joint

l = \frac{A weld bed}{2 \cdot t throat}

Go Length of Weld given Area of Fillet Weld and Throat Thickness for Single Fillet Lap Joint

l = \frac{A weld bed}{t throat}

Go Length of Weld given Area of Fillet Weld for Double Fillet Lap Joint

l = \frac{A weld bed}{1.414 \cdot t plate}

Go Length of Weld given Area of Fillet Weld for Single Fillet Lap Joint

l = \frac{A weld bed}{0.707 \cdot t plate}

How to Evaluate Length of Weld given Tensile Strength of Double Fillet Lap?

Length of Weld given Tensile Strength of Double Fillet Lap evaluator uses Length of Weld = Tensile Strength/(1.414*Tensile Stress*Thickness of Plate) to evaluate the Length of Weld, The Length of weld given tensile strength of double fillet lap formula is defined as the linear distance of each weld segment. Length of Weld is denoted by l symbol.

How to evaluate Length of Weld given Tensile Strength of Double Fillet Lap using this online evaluator? To use this online evaluator for Length of Weld given Tensile Strength of Double Fillet Lap, enter Tensile Strength (TS), Tensile Stress (σ_t) & Thickness of Plate (t_plate) and hit the calculate button.

FAQs on Length of Weld given Tensile Strength of Double Fillet Lap

What is the formula to find Length of Weld given Tensile Strength of Double Fillet Lap?

The formula of Length of Weld given Tensile Strength of Double Fillet Lap is expressed as Length of Weld = Tensile Strength/(1.414*Tensile Stress*Thickness of Plate). Here is an example- 6.4E+7 = 35000000/(1.414*32000000*0.012).

How to calculate Length of Weld given Tensile Strength of Double Fillet Lap?

With Tensile Strength (TS), Tensile Stress (σ_t) & Thickness of Plate (t_plate) we can find Length of Weld given Tensile Strength of Double Fillet Lap using the formula - Length of Weld = Tensile Strength/(1.414*Tensile Stress*Thickness of Plate).

What are the other ways to Calculate Length of Weld?

Here are the different ways to Calculate Length of Weld-

Length of Weld=Weld Bed Area/(2*Throat Thickness)
Length of Weld=Weld Bed Area/Throat Thickness
Length of Weld=Weld Bed Area/(1.414*Thickness of Plate)

Can the Length of Weld given Tensile Strength of Double Fillet Lap be negative?

Yes, the Length of Weld given Tensile Strength of Double Fillet Lap, measured in Length can be negative.

Which unit is used to measure Length of Weld given Tensile Strength of Double Fillet Lap?

Length of Weld given Tensile Strength of Double Fillet Lap is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Length of Weld given Tensile Strength of Double Fillet Lap can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!