FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Length of Reach given Average Energy Slope for Non-Uniform Flow Formula

Fx Copy

LaTeX Copy

Reach in practical use is any length of a stream or river. The term is often used when referring to a small section of a stream or river rather than its entire length. Check FAQs

L = \frac{h f}{S favg}

L - Reach?h_f - Frictional Loss?S_favg - Average Energy Slope?

Length of Reach given Average Energy Slope for Non-Uniform Flow Example

With values

With units

Only example

Here is how the Length of Reach given Average Energy Slope for Non-Uniform Flow equation looks like with Values.

Here is how the Length of Reach given Average Energy Slope for Non-Uniform Flow equation looks like with Units.

Here is how the Length of Reach given Average Energy Slope for Non-Uniform Flow equation looks like.

10 = \frac{15}{1.5}

10m = \frac{15}{1.5}

10 = \frac{15}{1.5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Engineering Hydrology » fx Length of Reach given Average Energy Slope for Non-Uniform Flow

Length of Reach given Average Energy Slope for Non-Uniform Flow Solution

Follow our step by step solution on how to calculate Length of Reach given Average Energy Slope for Non-Uniform Flow?

FIRST Step Consider the formula

L = \frac{h f}{S favg}

Next Step Substitute values of Variables

∴

L = \frac{15}{1.5}

Next Step Prepare to Evaluate

∴

L = \frac{15}{1.5}

LAST Step Evaluate

∴

L = 10m

Length of Reach given Average Energy Slope for Non-Uniform Flow Formula Elements

Variables

Reach

Reach in practical use is any length of a stream or river. The term is often used when referring to a small section of a stream or river rather than its entire length.

Symbol: L

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Reach

Frictional Loss

Frictional Loss is the loss of pressure or “head” that occurs in pipe or duct flow due to the effect of the fluid's viscosity near the surface of the pipe or duct.

Symbol: h_f

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Frictional Loss

Average Energy Slope

Average Energy Slope is at a distance equal to the velocity head above the hydraulic gradient.

Symbol: S_favg

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Average Energy Slope

Other formulas in Non Uniform Flow category

Go Conveyance of Channel at End Sections at 1

K 1 = (\frac{1}{n}) \cdot A 1 \cdot {R 1}^{\frac{2}{3}}

Go Frictional Loss given Average Energy Slope

h f = S favg \cdot L

Go Average Energy Slope given Frictional Loss

S favg = \frac{h f}{L}

Go Average Energy Slope given Average Conveyance for Non-Uniform Flow

S favg = \frac{Q^{2}}{K^{2}}

How to Evaluate Length of Reach given Average Energy Slope for Non-Uniform Flow?

Length of Reach given Average Energy Slope for Non-Uniform Flow evaluator uses Reach = Frictional Loss/Average Energy Slope to evaluate the Reach, The Length of Reach given Average Energy Slope for Non-Uniform Flow formula is defined as the length of channel uniform concerning discharge, depth, area, and slope. The channel length for which a single gauge affords a satisfactory measure of the stage and discharge. Reach is denoted by L symbol.

How to evaluate Length of Reach given Average Energy Slope for Non-Uniform Flow using this online evaluator? To use this online evaluator for Length of Reach given Average Energy Slope for Non-Uniform Flow, enter Frictional Loss (h_f) & Average Energy Slope (S_favg) and hit the calculate button.

FAQs on Length of Reach given Average Energy Slope for Non-Uniform Flow

What is the formula to find Length of Reach given Average Energy Slope for Non-Uniform Flow?

The formula of Length of Reach given Average Energy Slope for Non-Uniform Flow is expressed as Reach = Frictional Loss/Average Energy Slope. Here is an example- 10 = 15/1.5.

How to calculate Length of Reach given Average Energy Slope for Non-Uniform Flow?

With Frictional Loss (h_f) & Average Energy Slope (S_favg) we can find Length of Reach given Average Energy Slope for Non-Uniform Flow using the formula - Reach = Frictional Loss/Average Energy Slope.

Can the Length of Reach given Average Energy Slope for Non-Uniform Flow be negative?

Yes, the Length of Reach given Average Energy Slope for Non-Uniform Flow, measured in Length can be negative.

Which unit is used to measure Length of Reach given Average Energy Slope for Non-Uniform Flow?

Length of Reach given Average Energy Slope for Non-Uniform Flow is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Length of Reach given Average Energy Slope for Non-Uniform Flow can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Length of Reach given Average Energy Slope for Non-Uniform Flow Formula

Length of Reach given Average Energy Slope for Non-Uniform Flow Example

Length of Reach given Average Energy Slope for Non-Uniform Flow Solution

Length of Reach given Average Energy Slope for Non-Uniform Flow Formula Elements

Other formulas in Non Uniform Flow category

How to Evaluate Length of Reach given Average Energy Slope for Non-Uniform Flow?

FAQs on Length of Reach given Average Energy Slope for Non-Uniform Flow

Variable Name