FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld Formula

GoLength of Parallel Fillet Weld given Load Carried by Parallel Fillet Weld Formula

Fx Copy

LaTeX Copy

Length of Parallel Fillet Weld is the distance between two consecutive end of welds. Check FAQs

L parallel = \frac{W - 0.707 \cdot σ t \cdot L single \cdot t plate}{1.414 \cdot 𝜏 \cdot t plate}

L_parallel - Length of Parallel Fillet Weld?W - Load on weld?σ_t - Tensile Stress?L_single - Length of Single Fillet Lap Weld?t_plate - Thickness of Plate?𝜏 - Shear Stress?

Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld Example

With values

With units

Only example

Here is how the Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld equation looks like with Values.

Here is how the Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld equation looks like with Units.

Here is how the Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld equation looks like.

211.0042 = \frac{9 - 0.707 \cdot 32 \cdot 1.5 \cdot 12}{1.414 \cdot 2.4 \cdot 12}

211.0042mm = \frac{9kN - 0.707 \cdot 32MPa \cdot 1.5mm \cdot 12mm}{1.414 \cdot 2.4MPa \cdot 12mm}

211.0042 = \frac{9 - 0.707 \cdot 32 \cdot 1.5 \cdot 12}{1.414 \cdot 2.4 \cdot 12}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld

Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld Solution

Follow our step by step solution on how to calculate Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld?

FIRST Step Consider the formula

L parallel = \frac{W - 0.707 \cdot σ t \cdot L single \cdot t plate}{1.414 \cdot 𝜏 \cdot t plate}

Next Step Substitute values of Variables

∴

L parallel = \frac{9kN - 0.707 \cdot 32MPa \cdot 1.5mm \cdot 12mm}{1.414 \cdot 2.4MPa \cdot 12mm}

Next Step Convert Units

∴

L parallel = \frac{9000N - 0.707 \cdot 3.2E+7Pa \cdot 0.0015m \cdot 0.012m}{1.414 \cdot 2.4E+6Pa \cdot 0.012m}

Next Step Prepare to Evaluate

∴

L parallel = \frac{9000 - 0.707 \cdot 3.2E+7 \cdot 0.0015 \cdot 0.012}{1.414 \cdot 2.4E+6 \cdot 0.012}

Next Step Evaluate

∴

L parallel = 0.211004243281471m

Next Step Convert to Output's Unit

∴

L parallel = 211.004243281471mm

LAST Step Rounding Answer

∴

L parallel = 211.0042mm

Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld Formula Elements

Variables

Length of Parallel Fillet Weld

Length of Parallel Fillet Weld is the distance between two consecutive end of welds.

Symbol: L_parallel

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Parallel Fillet Weld

Load on weld

Load on weld is the instantaneous load applied perpendicular to the specimen cross section.

Symbol: W

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Load on weld

Tensile Stress

Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Length of Single Fillet Lap Weld

The Length of Single Fillet Lap Weld is the distance between two consecutive ends of welds.

Symbol: L_single

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Single Fillet Lap Weld

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Shear Stress

Shear Stress is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.

Symbol: 𝜏

Measurement: StressUnit: MPa

Note: Value should be greater than 0.

Formulas to find Shear Stress

Other Formulas to find Length of Parallel Fillet Weld

Go Length of Parallel Fillet Weld given Load Carried by Parallel Fillet Weld

L parallel = \frac{W}{1.414 \cdot 𝜏 \cdot t plate}

Other formulas in Analysis of Compound Weld category

Go Load Carried by Single Fillet Lap Weld

W = 0.707 \cdot σ t \cdot L single \cdot t plate

Go Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld

σ t = \frac{W}{0.707 \cdot L single \cdot t plate}

Go Length of Single Fillet Lap Weld given Load Carried by Single Fillet Lap Weld

L single = \frac{W}{0.707 \cdot σ t \cdot t plate}

Go Thickness of Plates given Load Carried by Single Fillet Lap Weld

t plate = \frac{W}{0.707 \cdot σ t \cdot L single}

How to Evaluate Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld?

Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld evaluator uses Length of Parallel Fillet Weld = (Load on weld-0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate)/(1.414*Shear Stress*Thickness of Plate) to evaluate the Length of Parallel Fillet Weld, The Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld formula is defined as the distance between the two consecutive ends of the weld. Length of Parallel Fillet Weld is denoted by L_parallel symbol.

How to evaluate Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld using this online evaluator? To use this online evaluator for Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld, enter Load on weld (W), Tensile Stress (σ_t), Length of Single Fillet Lap Weld (L_single), Thickness of Plate (t_plate) & Shear Stress (𝜏) and hit the calculate button.

FAQs on Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld

What is the formula to find Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld?

The formula of Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld is expressed as Length of Parallel Fillet Weld = (Load on weld-0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate)/(1.414*Shear Stress*Thickness of Plate). Here is an example- 211004.2 = (9000-0.707*32000000*0.0015*0.012)/(1.414*2400000*0.012).

How to calculate Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld?

With Load on weld (W), Tensile Stress (σ_t), Length of Single Fillet Lap Weld (L_single), Thickness of Plate (t_plate) & Shear Stress (𝜏) we can find Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld using the formula - Length of Parallel Fillet Weld = (Load on weld-0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate)/(1.414*Shear Stress*Thickness of Plate).

What are the other ways to Calculate Length of Parallel Fillet Weld?

Here are the different ways to Calculate Length of Parallel Fillet Weld-

Length of Parallel Fillet Weld=Load on weld/(1.414*Shear Stress*Thickness of Plate)

Can the Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld be negative?

Yes, the Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld, measured in Length can be negative.

Which unit is used to measure Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld?

Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld Formula

​GoLength of Parallel Fillet Weld given Load Carried by Parallel Fillet Weld Formula

Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld Example

Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld Solution

Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld Formula Elements

Other Formulas to find Length of Parallel Fillet Weld

Other formulas in Analysis of Compound Weld category

How to Evaluate Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld?

FAQs on Length of Parallel Fillet Weld given Total Load Carried by Plates in Compound Weld

Variable Name

GoLength of Parallel Fillet Weld given Load Carried by Parallel Fillet Weld Formula