FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Length of fulcrum pin boss given compressive stress in pin Formula

Fx Copy

LaTeX Copy

The Length of Pin Boss is the distance from the center of the pin to the surface of the lever, crucial for ensuring proper fit and function in mechanical designs. Check FAQs

l = \frac{R f}{σt fp \cdot d 1}

l - Length of Pin Boss?R_f - Force at Lever Fulcrum Pin?σt_fp - Compressive Stress in Fulcrum Pin?d₁ - Diameter of Lever Fulcrum Pin?

Length of fulcrum pin boss given compressive stress in pin Example

With values

With units

Only example

Here is how the Length of fulcrum pin boss given compressive stress in pin equation looks like with Values.

Here is how the Length of fulcrum pin boss given compressive stress in pin equation looks like with Units.

Here is how the Length of fulcrum pin boss given compressive stress in pin equation looks like.

9.2355 = \frac{2964}{25.9 \cdot 12.3913}

9.2355mm = \frac{2964N}{25.9N/mm² \cdot 12.3913mm}

9.2355 = \frac{2964}{25.9 \cdot 12.3913}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Mechanical » Category

Machine Design » fx Length of fulcrum pin boss given compressive stress in pin

Length of fulcrum pin boss given compressive stress in pin Solution

Follow our step by step solution on how to calculate Length of fulcrum pin boss given compressive stress in pin?

FIRST Step Consider the formula

l = \frac{R f}{σt fp \cdot d 1}

Next Step Substitute values of Variables

∴

l = \frac{2964N}{25.9N/mm² \cdot 12.3913mm}

Next Step Convert Units

∴

l = \frac{2964N}{2.6E+7Pa \cdot 0.0124m}

Next Step Prepare to Evaluate

∴

l = \frac{2964}{2.6E+7 \cdot 0.0124}

Next Step Evaluate

∴

l = 0.00923552447605614m

Next Step Convert to Output's Unit

∴

l = 9.23552447605614mm

LAST Step Rounding Answer

∴

l = 9.2355mm

Length of fulcrum pin boss given compressive stress in pin Formula Elements

Variables

Length of Pin Boss

The Length of Pin Boss is the distance from the center of the pin to the surface of the lever, crucial for ensuring proper fit and function in mechanical designs.

Symbol: l

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Pin Boss

Force at Lever Fulcrum Pin

The Force at Lever Fulcrum Pin is the force exerted at the pivot point of a lever, crucial for understanding the lever's mechanical advantage and performance.

Symbol: R_f

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Force at Lever Fulcrum Pin

Compressive Stress in Fulcrum Pin

The Compressive Stress in Fulcrum Pin is the internal force per unit area experienced by the pin due to loads applied during lever operation, affecting its structural integrity.

Symbol: σt_fp

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Compressive Stress in Fulcrum Pin

Diameter of Lever Fulcrum Pin

The Diameter of Lever Fulcrum Pin is the measurement across the pin that serves as the pivot point in a lever system, affecting its mechanical advantage and stability.

Symbol: d₁

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Lever Fulcrum Pin

Other formulas in Design of Fulcrum Pin category

Go Diameter of fulcrum pin of lever given bending moment and effort force

d 1 = (l 1) - (\frac{M b}{P})

Go Bearing pressure in fulcrum pin of lever given reaction force and diameter of pin

P b = \frac{R f}{d 1 \cdot l f}

Go Diameter of fulcrum pin of lever given reaction force and bearing pressure

d 1 = \frac{R f}{P b \cdot l f}

Go Length of flucrum pin of lever given reaction force and bearing pressure

l f = \frac{R f}{P b \cdot d 1}

How to Evaluate Length of fulcrum pin boss given compressive stress in pin?

Length of fulcrum pin boss given compressive stress in pin evaluator uses Length of Pin Boss = Force at Lever Fulcrum Pin/(Compressive Stress in Fulcrum Pin*Diameter of Lever Fulcrum Pin) to evaluate the Length of Pin Boss, Length of fulcrum pin boss given compressive stress in pin formula is defined as a method to determine the length of a fulcrum pin boss based on the compressive stress in the pin and other design parameters. Length of Pin Boss is denoted by l symbol.

How to evaluate Length of fulcrum pin boss given compressive stress in pin using this online evaluator? To use this online evaluator for Length of fulcrum pin boss given compressive stress in pin, enter Force at Lever Fulcrum Pin (R_f), Compressive Stress in Fulcrum Pin (σt_fp) & Diameter of Lever Fulcrum Pin (d₁) and hit the calculate button.

FAQs on Length of fulcrum pin boss given compressive stress in pin

What is the formula to find Length of fulcrum pin boss given compressive stress in pin?

The formula of Length of fulcrum pin boss given compressive stress in pin is expressed as Length of Pin Boss = Force at Lever Fulcrum Pin/(Compressive Stress in Fulcrum Pin*Diameter of Lever Fulcrum Pin). Here is an example- 9865.531 = 2964/(25900000*0.0123913).

How to calculate Length of fulcrum pin boss given compressive stress in pin?

With Force at Lever Fulcrum Pin (R_f), Compressive Stress in Fulcrum Pin (σt_fp) & Diameter of Lever Fulcrum Pin (d₁) we can find Length of fulcrum pin boss given compressive stress in pin using the formula - Length of Pin Boss = Force at Lever Fulcrum Pin/(Compressive Stress in Fulcrum Pin*Diameter of Lever Fulcrum Pin).

Can the Length of fulcrum pin boss given compressive stress in pin be negative?

No, the Length of fulcrum pin boss given compressive stress in pin, measured in Length cannot be negative.

Which unit is used to measure Length of fulcrum pin boss given compressive stress in pin?

Length of fulcrum pin boss given compressive stress in pin is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Length of fulcrum pin boss given compressive stress in pin can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Length of fulcrum pin boss given compressive stress in pin Formula

Length of fulcrum pin boss given compressive stress in pin Example

Length of fulcrum pin boss given compressive stress in pin Solution

Length of fulcrum pin boss given compressive stress in pin Formula Elements

Other formulas in Design of Fulcrum Pin category

How to Evaluate Length of fulcrum pin boss given compressive stress in pin?

FAQs on Length of fulcrum pin boss given compressive stress in pin

Variable Name