FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Length of Fillet Leg in Lap Joints from Shrinkage Formula

Fx Copy

LaTeX Copy

The length of fillet leg in welding is the distance from the root of the fillet weld to the toe, measured along the legs of the triangular cross-section. Check FAQs

h = \frac{s \cdot p tl}{1.52}

h - Length of Fillet Leg?s - Transverse Shrinkage?p_tl - Plate Thickness in Lap Joint?

Length of Fillet Leg in Lap Joints from Shrinkage Example

With values

With units

Only example

Here is how the Length of Fillet Leg in Lap Joints from Shrinkage equation looks like with Values.

Here is how the Length of Fillet Leg in Lap Joints from Shrinkage equation looks like with Units.

Here is how the Length of Fillet Leg in Lap Joints from Shrinkage equation looks like.

2.1057 = \frac{4 \cdot 800.17}{1.52}

2.1057mm = \frac{4mm \cdot 800.17mm}{1.52}

2.1057 = \frac{4 \cdot 800.17}{1.52}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Welding » fx Length of Fillet Leg in Lap Joints from Shrinkage

Length of Fillet Leg in Lap Joints from Shrinkage Solution

Follow our step by step solution on how to calculate Length of Fillet Leg in Lap Joints from Shrinkage?

FIRST Step Consider the formula

h = \frac{s \cdot p tl}{1.52}

Next Step Substitute values of Variables

∴

h = \frac{4mm \cdot 800.17mm}{1.52}

Next Step Convert Units

∴

h = \frac{0.004m \cdot 0.8002m}{1.52}

Next Step Prepare to Evaluate

∴

h = \frac{0.004 \cdot 0.8002}{1.52}

Next Step Evaluate

∴

h = 0.00210571052631579m

Next Step Convert to Output's Unit

∴

h = 2.10571052631579mm

LAST Step Rounding Answer

∴

h = 2.1057mm

Length of Fillet Leg in Lap Joints from Shrinkage Formula Elements

Variables

Length of Fillet Leg

The length of fillet leg in welding is the distance from the root of the fillet weld to the toe, measured along the legs of the triangular cross-section.

Symbol: h

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Fillet Leg

Transverse Shrinkage

Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.

Symbol: s

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Transverse Shrinkage

Plate Thickness in Lap Joint

Plate Thickness in Lap Joint refers to the thickness of the overlapping plates that are welded together.

Symbol: p_tl

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Plate Thickness in Lap Joint

Other formulas in Lap Joint with Fillets category

Go Transverse Shrinkage in Lap Joint with Fillets

s = \frac{1.52 \cdot h}{p tl}

Go Thickness of Plates in Lap Joints

p tl = \frac{1.52 \cdot h}{s}

How to Evaluate Length of Fillet Leg in Lap Joints from Shrinkage?

Length of Fillet Leg in Lap Joints from Shrinkage evaluator uses Length of Fillet Leg = (Transverse Shrinkage*Plate Thickness in Lap Joint)/1.52 to evaluate the Length of Fillet Leg, The Length of Fillet Leg in Lap Joints from Shrinkage formula is defined as the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other. Length of Fillet Leg is denoted by h symbol.

How to evaluate Length of Fillet Leg in Lap Joints from Shrinkage using this online evaluator? To use this online evaluator for Length of Fillet Leg in Lap Joints from Shrinkage, enter Transverse Shrinkage (s) & Plate Thickness in Lap Joint (p_tl) and hit the calculate button.

FAQs on Length of Fillet Leg in Lap Joints from Shrinkage

What is the formula to find Length of Fillet Leg in Lap Joints from Shrinkage?

The formula of Length of Fillet Leg in Lap Joints from Shrinkage is expressed as Length of Fillet Leg = (Transverse Shrinkage*Plate Thickness in Lap Joint)/1.52. Here is an example- 2389.981 = (0.004*0.80017)/1.52.

How to calculate Length of Fillet Leg in Lap Joints from Shrinkage?

With Transverse Shrinkage (s) & Plate Thickness in Lap Joint (p_tl) we can find Length of Fillet Leg in Lap Joints from Shrinkage using the formula - Length of Fillet Leg = (Transverse Shrinkage*Plate Thickness in Lap Joint)/1.52.

Can the Length of Fillet Leg in Lap Joints from Shrinkage be negative?

No, the Length of Fillet Leg in Lap Joints from Shrinkage, measured in Length cannot be negative.

Which unit is used to measure Length of Fillet Leg in Lap Joints from Shrinkage?

Length of Fillet Leg in Lap Joints from Shrinkage is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Length of Fillet Leg in Lap Joints from Shrinkage can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Length of Fillet Leg in Lap Joints from Shrinkage Formula

Length of Fillet Leg in Lap Joints from Shrinkage Example

Length of Fillet Leg in Lap Joints from Shrinkage Solution

Length of Fillet Leg in Lap Joints from Shrinkage Formula Elements

Other formulas in Lap Joint with Fillets category

How to Evaluate Length of Fillet Leg in Lap Joints from Shrinkage?

FAQs on Length of Fillet Leg in Lap Joints from Shrinkage

Variable Name